samples/debian.ros to make debian package(not tested)

debian/README.Debian

@@ -0,0 +1,6 @@
+roswell for Debian
+------------------
+
+<possible notes regarding this package - if none, delete this file>
+
+ -- Masatoshi SANO <snmsts@gmail.com>  Thu, 05 Feb 2015 07:16:40 +0900

debian/README.source

@@ -0,0 +1,10 @@
+roswell for Debian
+------------------
+
+<this file describes information about the source package, see Debian policy
+manual section 4.14. You WILL either need to modify or delete this file>
+
+
+
+ -- Masatoshi SANO <snmsts@gmail.com>  Thu, 05 Feb 2015 07:16:40 +0900
+

debian/autoreconf.after

@@ -0,0 +1,59 @@
+d41d8cd98f00b204e9800998ecf8427e  ./ChangeLog
+f4aafb270c2f983f35b365aad5fe8870  ./depcomp
+a51ce79fe49445aa60e79fae36f0c039  ./autom4te.cache/output.1
+a51ce79fe49445aa60e79fae36f0c039  ./autom4te.cache/output.0
+a89a4bdfe4950b57beb60ae5eae2d933  ./autom4te.cache/traces.1
+d88ef801448e44792e1cfd97c2c9e255  ./autom4te.cache/requests
+3a0c94efdbe18b14677b1c3bdaa97133  ./autom4te.cache/traces.0
+fb4a52483d431c545505e2710473a773  ./Makefile.in
+c11467c002de0c28fd1e35a3eb1d7d0b  ./COPYING
+1be6cc4f7e7bd8d2ac9a63cd47dfeaad  ./README.md
+6e5fe73723cd40a28adc5b7b5650c8d1  ./install-sh
+7ce728e42b3b23fa41b0e81f7f2d11be  ./Makefile.am
+a45c51b165fc7f4116286e36ff367c0b  ./config.h.in
+0a298977cf0d0530af6353b479ec166a  ./.travis.yml
+377abdf1e4af9322ce9e550e44600880  ./bootstrap
+f32346e88eccb61d8bfe5eb2bce3b2ae  ./t/roswell.ros
+d41d8cd98f00b204e9800998ecf8427e  ./NEWS
+04491ae35ea9f4fb4ee549701d6830d8  ./samples/hello.ros
+f068e161cd8fd38188749b417b9d1d42  ./configure
+c9f67adba3ab387ba8faa7e9a43400ae  ./aclocal.m4
+61b9e18e0c5673839afd588124e70afd  ./configure.ac
+d41d8cd98f00b204e9800998ecf8427e  ./AUTHORS
+0c8b042f99995c11aeb81bccc23c4c05  ./compile
+a318addb45af3676ecc3d5b46c713e83  ./src/cmd-help.c
+43498c93848988dea5f067662c38442c  ./src/cmd-setup.c
+6fc5843c203e8ac2df2cb05e68e419b7  ./src/opt.h
+b1083bb38503f4e64774bfd495cc7873  ./src/html.c
+65a0ff8c4ef6364f72adf17f5f8ca40c  ./src/download.c
+5ab756c4d5626dac1baf282c77c8365e  ./src/cmd-run-sbcl.c
+bff61fc93151b110177c66402e958329  ./src/util.h
+3cde6819f0945cd9677d310a26c9bad8  ./src/Makefile.in
+3ae6ed3977e7815f34ff29f727e073a5  ./src/opt.c
+370d9742bd5cc64aa915e35b823d4434  ./src/internal.c
+f60d136d068ac26f9e8731113f6fa1c2  ./src/cmd-config.c
+c804eab0c0ab4ff7320a5ea009546d32  ./src/cmd-run.c
+1c4a7773a316708f9e884e77a74f70f0  ./src/cmd-version.c
+9e0ed112cf5f23b9b6830472c296f0e9  ./src/Makefile.am
+2399e5d2c325e2094c75de6d960f35e1  ./src/cmd-run-ccl.c
+2db9f81327612299b2bb05097f171921  ./src/archive.c
+7d99aa596e031504f4126628324dd1fa  ./src/cmd-install.h
+2b88ba4d3d113d1e604f4ea76fd218f7  ./src/cmd-install-sbcl-bin.c
+31eea4bee509e0704fbcfd9759dc1c72  ./src/lsp.c
+a0164f37c1d8eaa4e18dcc4351c0802c  ./src/cmd-install-quicklisp.c
+c478b875ebf63da2cd444b58f686197a  ./src/cmd-install.c
+bc83c8ac32fb2fc9f6f4f1cfb95f8756  ./src/lisp/use.ros
+2a2ea7d4a3f1136178a80d10320d27d1  ./src/lisp/init.lisp
+be736be8c8ac6455b07854e330955d15  ./src/lisp/install/7zip.lisp
+48136b149af96759fc7239970f9fa061  ./src/lisp/install/sbcl-bin.lisp
+af286347938e0b0881ac29ff136827e1  ./src/lisp/install/msys.lisp
+52e095b3c41ac1135b90e6ccf32ecd9f  ./src/lisp/install/quicklisp.lisp
+8963f49eba8110fbd0b967447c5a7f15  ./src/lisp/install/ccl-bin.lisp
+d736b816bf78e803e324f204df07c24f  ./src/lisp/install/sbcl.lisp
+e492835b971288e122d455f45e99b8e5  ./src/lisp/list.ros
+ee3fca1adb0772f04c79cf353f1a4336  ./src/lisp/delete.ros
+325fe0671440b03f078826ed78b76e6d  ./src/lisp/dump.ros
+7caceaa87d22f3b1cbca0c29482edfc0  ./src/lisp/init.ros
+32bf2a7fee6f17fd690d4002b621960b  ./src/lisp/install.ros
+3d90058647decac14efd2b8c07aeaf0f  ./src/util.c
+1ad54e190e8322176a47a48621ad0887  ./missing

debian/autoreconf.before

@@ -0,0 +1,45 @@
+d41d8cd98f00b204e9800998ecf8427e  ./ChangeLog
+c11467c002de0c28fd1e35a3eb1d7d0b  ./COPYING
+1be6cc4f7e7bd8d2ac9a63cd47dfeaad  ./README.md
+7ce728e42b3b23fa41b0e81f7f2d11be  ./Makefile.am
+0a298977cf0d0530af6353b479ec166a  ./.travis.yml
+377abdf1e4af9322ce9e550e44600880  ./bootstrap
+f32346e88eccb61d8bfe5eb2bce3b2ae  ./t/roswell.ros
+d41d8cd98f00b204e9800998ecf8427e  ./NEWS
+04491ae35ea9f4fb4ee549701d6830d8  ./samples/hello.ros
+61b9e18e0c5673839afd588124e70afd  ./configure.ac
+d41d8cd98f00b204e9800998ecf8427e  ./AUTHORS
+a318addb45af3676ecc3d5b46c713e83  ./src/cmd-help.c
+43498c93848988dea5f067662c38442c  ./src/cmd-setup.c
+6fc5843c203e8ac2df2cb05e68e419b7  ./src/opt.h
+b1083bb38503f4e64774bfd495cc7873  ./src/html.c
+65a0ff8c4ef6364f72adf17f5f8ca40c  ./src/download.c
+5ab756c4d5626dac1baf282c77c8365e  ./src/cmd-run-sbcl.c
+bff61fc93151b110177c66402e958329  ./src/util.h
+3ae6ed3977e7815f34ff29f727e073a5  ./src/opt.c
+370d9742bd5cc64aa915e35b823d4434  ./src/internal.c
+f60d136d068ac26f9e8731113f6fa1c2  ./src/cmd-config.c
+c804eab0c0ab4ff7320a5ea009546d32  ./src/cmd-run.c
+1c4a7773a316708f9e884e77a74f70f0  ./src/cmd-version.c
+9e0ed112cf5f23b9b6830472c296f0e9  ./src/Makefile.am
+2399e5d2c325e2094c75de6d960f35e1  ./src/cmd-run-ccl.c
+2db9f81327612299b2bb05097f171921  ./src/archive.c
+7d99aa596e031504f4126628324dd1fa  ./src/cmd-install.h
+2b88ba4d3d113d1e604f4ea76fd218f7  ./src/cmd-install-sbcl-bin.c
+31eea4bee509e0704fbcfd9759dc1c72  ./src/lsp.c
+a0164f37c1d8eaa4e18dcc4351c0802c  ./src/cmd-install-quicklisp.c
+c478b875ebf63da2cd444b58f686197a  ./src/cmd-install.c
+bc83c8ac32fb2fc9f6f4f1cfb95f8756  ./src/lisp/use.ros
+2a2ea7d4a3f1136178a80d10320d27d1  ./src/lisp/init.lisp
+be736be8c8ac6455b07854e330955d15  ./src/lisp/install/7zip.lisp
+48136b149af96759fc7239970f9fa061  ./src/lisp/install/sbcl-bin.lisp
+af286347938e0b0881ac29ff136827e1  ./src/lisp/install/msys.lisp
+52e095b3c41ac1135b90e6ccf32ecd9f  ./src/lisp/install/quicklisp.lisp
+8963f49eba8110fbd0b967447c5a7f15  ./src/lisp/install/ccl-bin.lisp
+d736b816bf78e803e324f204df07c24f  ./src/lisp/install/sbcl.lisp
+e492835b971288e122d455f45e99b8e5  ./src/lisp/list.ros
+ee3fca1adb0772f04c79cf353f1a4336  ./src/lisp/delete.ros
+325fe0671440b03f078826ed78b76e6d  ./src/lisp/dump.ros
+7caceaa87d22f3b1cbca0c29482edfc0  ./src/lisp/init.ros
+32bf2a7fee6f17fd690d4002b621960b  ./src/lisp/install.ros
+3d90058647decac14efd2b8c07aeaf0f  ./src/util.c

debian/changelog

@@ -0,0 +1,5 @@
+roswell (0.0.2.22-1) unstable; urgency=low
+
+  * Initial release (Closes: #nnnn)  <nnnn is the bug number of your ITP>
+
+ -- Masatoshi SANO <snmsts@gmail.com>  Thu, 05 Feb 2015 07:16:40 +0900

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,14 @@
+Source: roswell
+Section: lisp
+Priority: optional
+Maintainer: Masatoshi SANO <snmsts@gmail.com>
+Build-Depends: debhelper (>= 9)
+Standards-Version: 3.9.5
+Homepage: https://github.com/snmsts/roswell
+Vcs-Git: https://github.com/snmsts/roswell.git
+
+Package: roswell
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: <insert up to 60 chars description>
+ <insert long description, indented with spaces>

debian/copyright

@@ -0,0 +1,36 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: roswell
+Source: <url://example.com>
+
+Files: *
+Copyright: <years> <put author's name and email here>
+           <years> <likewise for another author>
+License: MIT
+
+Files: debian/*
+Copyright: 2015 Masatoshi SANO <snmsts@gmail.com>
+License: MIT
+
+License: MIT
+ Permission is hereby granted, free of charge, to any person obtaining a
+ copy of this software and associated documentation files (the "Software"),
+ to deal in the Software without restriction, including without limitation
+ the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ and/or sell copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following conditions:
+ .
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+ .
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, 
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# Please also look if there are files or directories which have a
+# different copyright/license attached and list them here.
+# Please avoid to pick license terms that are more restrictive than the
+# packaged work, as it may make Debian's contributions unacceptable upstream.

debian/docs

@@ -0,0 +1,2 @@
+NEWS
+README.md

debian/files

@@ -0,0 +1 @@
+roswell_0.0.2.22-1_amd64.deb lisp optional

debian/init.d.ex

@@ -0,0 +1,166 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          roswell
+# Required-Start:    $local_fs $network $remote_fs $syslog
+# Required-Stop:     $local_fs $network $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: <Enter a short description of the software>
+# Description:       <Enter a long description of the software>
+#                    <...>
+#                    <...>
+### END INIT INFO
+
+# Author: Masatoshi SANO <snmsts@gmail.com>
+
+# Do NOT "set -e"
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="roswell"
+NAME=roswell
+DAEMON=/usr/sbin/roswell
+DAEMON_ARGS=""
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+	# The above code will not work for interpreted scripts, use the next
+	# six lines below instead (Ref: #643337, start-stop-daemon(8) )
+	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+	#	--name $NAME --test > /dev/null \
+	#	|| return 1
+	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+	#	--name $NAME -- $DAEMON_ARGS \
+	#	|| return 2
+
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+	do_start
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+	;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+		# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

debian/manpage.1.ex

@@ -0,0 +1,56 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" (C) Copyright 2015 Masatoshi SANO <snmsts@gmail.com>,
+.\"
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH ROSWELL SECTION "February  5, 2015"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+roswell \- program to do something
+.SH SYNOPSIS
+.B roswell
+.RI [ options ] " files" ...
+.br
+.B bar
+.RI [ options ] " files" ...
+.SH DESCRIPTION
+This manual page documents briefly the
+.B roswell
+and
+.B bar
+commands.
+.PP
+.\" TeX users may be more comfortable with the \fB<whatever>\fP and
+.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
+.\" respectively.
+\fBroswell\fP is a program that...
+.SH OPTIONS
+These programs follow the usual GNU command line syntax, with long
+options starting with two dashes (`-').
+A summary of options is included below.
+For a complete description, see the Info files.
+.TP
+.B \-h, \-\-help
+Show summary of options.
+.TP
+.B \-v, \-\-version
+Show version of program.
+.SH SEE ALSO
+.BR bar (1),
+.BR baz (1).
+.br
+The programs are documented fully by
+.IR "The Rise and Fall of a Fooish Bar" ,
+available via the Info system.

debian/manpage.sgml.ex

@@ -0,0 +1,154 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
+
+<!-- Process this file with docbook-to-man to generate an nroff manual
+     page: `docbook-to-man manpage.sgml > manpage.1'.  You may view
+     the manual page with: `docbook-to-man manpage.sgml | nroff -man |
+     less'.  A typical entry in a Makefile or Makefile.am is:
+
+manpage.1: manpage.sgml
+	docbook-to-man $< > $@
+
+
+	The docbook-to-man binary is found in the docbook-to-man package.
+	Please remember that if you create the nroff version in one of the
+	debian/rules file targets (such as build), you will need to include
+	docbook-to-man in your Build-Depends control field.
+
+  -->
+
+  <!-- Fill in your name for FIRSTNAME and SURNAME. -->
+  <!ENTITY dhfirstname "<firstname>FIRSTNAME</firstname>">
+  <!ENTITY dhsurname   "<surname>SURNAME</surname>">
+  <!-- Please adjust the date whenever revising the manpage. -->
+  <!ENTITY dhdate      "<date>February  5, 2015</date>">
+  <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
+       allowed: see man(7), man(1). -->
+  <!ENTITY dhsection   "<manvolnum>SECTION</manvolnum>">
+  <!ENTITY dhemail     "<email>snmsts@gmail.com</email>">
+  <!ENTITY dhusername  "Masatoshi SANO">
+  <!ENTITY dhucpackage "<refentrytitle>ROSWELL</refentrytitle>">
+  <!ENTITY dhpackage   "roswell">
+
+  <!ENTITY debian      "<productname>Debian</productname>">
+  <!ENTITY gnu         "<acronym>GNU</acronym>">
+  <!ENTITY gpl         "&gnu; <acronym>GPL</acronym>">
+]>
+
+<refentry>
+  <refentryinfo>
+    <address>
+      &dhemail;
+    </address>
+    <author>
+      &dhfirstname;
+      &dhsurname;
+    </author>
+    <copyright>
+      <year>2003</year>
+      <holder>&dhusername;</holder>
+    </copyright>
+    &dhdate;
+  </refentryinfo>
+  <refmeta>
+    &dhucpackage;
+
+    &dhsection;
+  </refmeta>
+  <refnamediv>
+    <refname>&dhpackage;</refname>
+
+    <refpurpose>program to do something</refpurpose>
+  </refnamediv>
+  <refsynopsisdiv>
+    <cmdsynopsis>
+      <command>&dhpackage;</command>
+
+      <arg><option>-e <replaceable>this</replaceable></option></arg>
+
+      <arg><option>--example <replaceable>that</replaceable></option></arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+  <refsect1>
+    <title>DESCRIPTION</title>
+
+    <para>This manual page documents briefly the
+      <command>&dhpackage;</command> and <command>bar</command>
+      commands.</para>
+
+    <para>This manual page was written for the &debian; distribution
+      because the original program does not have a manual page.
+      Instead, it has documentation in the &gnu;
+      <application>Info</application> format; see below.</para>
+
+    <para><command>&dhpackage;</command> is a program that...</para>
+
+  </refsect1>
+  <refsect1>
+    <title>OPTIONS</title>
+
+    <para>These programs follow the usual &gnu; command line syntax,
+      with long options starting with two dashes (`-').  A summary of
+      options is included below.  For a complete description, see the
+      <application>Info</application> files.</para>
+
+    <variablelist>
+      <varlistentry>
+        <term><option>-h</option>
+          <option>--help</option>
+        </term>
+        <listitem>
+          <para>Show summary of options.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>-v</option>
+          <option>--version</option>
+        </term>
+        <listitem>
+          <para>Show version of program.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  <refsect1>
+    <title>SEE ALSO</title>
+
+    <para>bar (1), baz (1).</para>
+
+    <para>The programs are documented fully by <citetitle>The Rise and
+      Fall of a Fooish Bar</citetitle> available via the
+      <application>Info</application> system.</para>
+  </refsect1>
+  <refsect1>
+    <title>AUTHOR</title>
+
+    <para>This manual page was written by &dhusername; &dhemail; for
+      the &debian; system (and may be used by others).  Permission is
+      granted to copy, distribute and/or modify this document under
+      the terms of the &gnu; General Public License, Version 2 any
+      later version published by the Free Software Foundation.
+    </para>
+    <para>
+      On Debian systems, the complete text of the GNU General Public
+      License can be found in /usr/share/common-licenses/GPL.
+    </para>
+
+  </refsect1>
+</refentry>
+
+<!-- Keep this comment at the end of the file
+Local variables:
+mode: sgml
+sgml-omittag:t
+sgml-shorttag:t
+sgml-minimize-attributes:nil
+sgml-always-quote-attributes:t
+sgml-indent-step:2
+sgml-indent-data:t
+sgml-parent-document:nil
+sgml-default-dtd-file:nil
+sgml-exposed-tags:nil
+sgml-local-catalogs:nil
+sgml-local-ecat-files:nil
+End:
+-->

debian/manpage.xml.ex

@@ -0,0 +1,291 @@
+<?xml version='1.0' encoding='UTF-8'?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+
+<!--
+
+`xsltproc -''-nonet \
+          -''-param man.charmap.use.subset "0" \
+          -''-param make.year.ranges "1" \
+          -''-param make.single.year.ranges "1" \
+          /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
+          manpage.xml'
+
+A manual page <package>.<section> will be generated. You may view the
+manual page with: nroff -man <package>.<section> | less'. A typical entry
+in a Makefile or Makefile.am is:
+
+DB2MAN = /usr/share/sgml/docbook/stylesheet/xsl/docbook-xsl/manpages/docbook.xsl
+XP     = xsltproc -''-nonet -''-param man.charmap.use.subset "0"
+
+manpage.1: manpage.xml
+        $(XP) $(DB2MAN) $<
+
+The xsltproc binary is found in the xsltproc package. The XSL files are in
+docbook-xsl. A description of the parameters you can use can be found in the
+docbook-xsl-doc-* packages. Please remember that if you create the nroff
+version in one of the debian/rules file targets (such as build), you will need
+to include xsltproc and docbook-xsl in your Build-Depends control field.
+Alternatively use the xmlto command/package. That will also automatically
+pull in xsltproc and docbook-xsl.
+
+Notes for using docbook2x: docbook2x-man does not automatically create the
+AUTHOR(S) and COPYRIGHT sections. In this case, please add them manually as
+<refsect1> ... </refsect1>.
+
+To disable the automatic creation of the AUTHOR(S) and COPYRIGHT sections
+read /usr/share/doc/docbook-xsl/doc/manpages/authors.html. This file can be
+found in the docbook-xsl-doc-html package.
+
+Validation can be done using: `xmllint -''-noout -''-valid manpage.xml`
+
+General documentation about man-pages and man-page-formatting:
+man(1), man(7), http://www.tldp.org/HOWTO/Man-Page/
+
+-->
+
+  <!-- Fill in your name for FIRSTNAME and SURNAME. -->
+  <!ENTITY dhfirstname "FIRSTNAME">
+  <!ENTITY dhsurname   "SURNAME">
+  <!-- dhusername could also be set to "&dhfirstname; &dhsurname;". -->
+  <!ENTITY dhusername  "Masatoshi SANO">
+  <!ENTITY dhemail     "snmsts@gmail.com">
+  <!-- SECTION should be 1-8, maybe w/ subsection other parameters are
+       allowed: see man(7), man(1) and
+       http://www.tldp.org/HOWTO/Man-Page/q2.html. -->
+  <!ENTITY dhsection   "SECTION">
+  <!-- TITLE should be something like "User commands" or similar (see
+       http://www.tldp.org/HOWTO/Man-Page/q2.html). -->
+  <!ENTITY dhtitle     "roswell User Manual">
+  <!ENTITY dhucpackage "ROSWELL">
+  <!ENTITY dhpackage   "roswell">
+]>
+
+<refentry>
+  <refentryinfo>
+    <title>&dhtitle;</title>
+    <productname>&dhpackage;</productname>
+    <authorgroup>
+      <author>
+       <firstname>&dhfirstname;</firstname>
+        <surname>&dhsurname;</surname>
+        <contrib>Wrote this manpage for the Debian system.</contrib>
+        <address>
+          <email>&dhemail;</email>
+        </address>
+      </author>
+    </authorgroup>
+    <copyright>
+      <year>2007</year>
+      <holder>&dhusername;</holder>
+    </copyright>
+    <legalnotice>
+      <para>This manual page was written for the Debian system
+        (and may be used by others).</para>
+      <para>Permission is granted to copy, distribute and/or modify this
+        document under the terms of the GNU General Public License,
+        Version 2 or (at your option) any later version published by
+        the Free Software Foundation.</para>
+      <para>On Debian systems, the complete text of the GNU General Public
+        License can be found in
+        <filename>/usr/share/common-licenses/GPL</filename>.</para>
+    </legalnotice>
+  </refentryinfo>
+  <refmeta>
+    <refentrytitle>&dhucpackage;</refentrytitle>
+    <manvolnum>&dhsection;</manvolnum>
+  </refmeta>
+  <refnamediv>
+    <refname>&dhpackage;</refname>
+    <refpurpose>program to do something</refpurpose>
+  </refnamediv>
+  <refsynopsisdiv>
+    <cmdsynopsis>
+      <command>&dhpackage;</command>
+      <!-- These are several examples, how syntaxes could look -->
+      <arg choice="plain"><option>-e <replaceable>this</replaceable></option></arg>
+      <arg choice="opt"><option>--example=<parameter>that</parameter></option></arg>
+      <arg choice="opt">
+        <group choice="req">
+          <arg choice="plain"><option>-e</option></arg>
+          <arg choice="plain"><option>--example</option></arg>
+        </group>
+        <replaceable class="option">this</replaceable>
+      </arg>
+      <arg choice="opt">
+        <group choice="req">
+          <arg choice="plain"><option>-e</option></arg>
+          <arg choice="plain"><option>--example</option></arg>
+        </group>
+        <group choice="req">
+          <arg choice="plain"><replaceable>this</replaceable></arg>
+          <arg choice="plain"><replaceable>that</replaceable></arg>
+        </group>
+      </arg>
+    </cmdsynopsis>
+    <cmdsynopsis>
+      <command>&dhpackage;</command>
+      <!-- Normally the help and version options make the programs stop
+           right after outputting the requested information. -->
+      <group choice="opt">
+        <arg choice="plain">
+          <group choice="req">
+            <arg choice="plain"><option>-h</option></arg>
+            <arg choice="plain"><option>--help</option></arg>
+          </group>
+        </arg>
+        <arg choice="plain">
+          <group choice="req">
+            <arg choice="plain"><option>-v</option></arg>
+            <arg choice="plain"><option>--version</option></arg>
+          </group>
+        </arg>
+      </group>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+  <refsect1 id="description">
+    <title>DESCRIPTION</title>
+    <para>This manual page documents briefly the
+      <command>&dhpackage;</command> and <command>bar</command>
+      commands.</para>
+    <para>This manual page was written for the Debian distribution
+      because the original program does not have a manual page.
+      Instead, it has documentation in the GNU <citerefentry>
+        <refentrytitle>info</refentrytitle>
+        <manvolnum>1</manvolnum>
+      </citerefentry> format; see below.</para>
+    <para><command>&dhpackage;</command> is a program that...</para>
+  </refsect1>
+  <refsect1 id="options">
+    <title>OPTIONS</title>
+    <para>The program follows the usual GNU command line syntax,
+      with long options starting with two dashes (`-').  A summary of
+      options is included below.  For a complete description, see the
+      <citerefentry>
+        <refentrytitle>info</refentrytitle>
+        <manvolnum>1</manvolnum>
+      </citerefentry> files.</para>
+    <variablelist>
+      <!-- Use the variablelist.term.separator and the
+           variablelist.term.break.after parameters to
+           control the term elements. -->
+      <varlistentry>
+        <term><option>-e <replaceable>this</replaceable></option></term>
+        <term><option>--example=<replaceable>that</replaceable></option></term>
+        <listitem>
+          <para>Does this and that.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>-h</option></term>
+        <term><option>--help</option></term>
+        <listitem>
+          <para>Show summary of options.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>-v</option></term>
+        <term><option>--version</option></term>
+        <listitem>
+          <para>Show version of program.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  <refsect1 id="files">
+    <title>FILES</title>
+    <variablelist>
+      <varlistentry>
+        <term><filename>/etc/foo.conf</filename></term>
+        <listitem>
+          <para>The system-wide configuration file to control the
+            behaviour of <application>&dhpackage;</application>. See
+            <citerefentry>
+              <refentrytitle>foo.conf</refentrytitle>
+              <manvolnum>5</manvolnum>
+            </citerefentry> for further details.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><filename>${HOME}/.foo.conf</filename></term>
+        <listitem>
+          <para>The per-user configuration file to control the
+             behaviour of <application>&dhpackage;</application>. See
+             <citerefentry>
+               <refentrytitle>foo.conf</refentrytitle>
+               <manvolnum>5</manvolnum>
+             </citerefentry> for further details.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  <refsect1 id="environment">
+    <title>ENVIRONMENT</title>
+    <variablelist>
+      <varlistentry>
+        <term><envar>FOO_CONF</envar></term>
+        <listitem>
+          <para>If used, the defined file is used as configuration
+            file (see also <xref linkend="files"/>).</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  <refsect1 id="diagnostics">
+    <title>DIAGNOSTICS</title>
+    <para>The following diagnostics may be issued
+      on <filename class="devicefile">stderr</filename>:</para>
+    <variablelist>
+      <varlistentry>
+        <term><errortext>Bad configuration file. Exiting.</errortext></term>
+        <listitem>
+          <para>The configuration file seems to contain a broken configuration
+            line. Use the <option>--verbose</option> option, to get more info.
+          </para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+    <para><command>&dhpackage;</command> provides some return codes, that can
+      be used in scripts:</para>
+    <segmentedlist>
+      <segtitle>Code</segtitle>
+      <segtitle>Diagnostic</segtitle>
+      <seglistitem>
+        <seg><errorcode>0</errorcode></seg>
+        <seg>Program exited successfully.</seg>
+      </seglistitem>
+      <seglistitem>
+        <seg><errorcode>1</errorcode></seg>
+        <seg>The configuration file seems to be broken.</seg>
+      </seglistitem>
+    </segmentedlist>
+  </refsect1>
+  <refsect1 id="bugs">
+    <!-- Or use this section to tell about upstream BTS. -->
+    <title>BUGS</title>
+    <para>The program is currently limited to only work
+      with the <package>foobar</package> library.</para>
+    <para>The upstreams <acronym>BTS</acronym> can be found
+      at <ulink url="http://bugzilla.foo.tld"/>.</para>
+  </refsect1>
+  <refsect1 id="see_also">
+    <title>SEE ALSO</title>
+    <!-- In alpabetical order. -->
+    <para><citerefentry>
+        <refentrytitle>bar</refentrytitle>
+        <manvolnum>1</manvolnum>
+      </citerefentry>, <citerefentry>
+        <refentrytitle>baz</refentrytitle>
+        <manvolnum>1</manvolnum>
+      </citerefentry>, <citerefentry>
+        <refentrytitle>foo.conf</refentrytitle>
+        <manvolnum>5</manvolnum>
+      </citerefentry></para>
+    <para>The programs are documented fully by <citetitle>The Rise and
+      Fall of a Fooish Bar</citetitle> available via the <citerefentry>
+        <refentrytitle>info</refentrytitle>
+        <manvolnum>1</manvolnum>
+      </citerefentry> system.</para>
+  </refsect1>
+</refentry>
+

debian/menu.ex

@@ -0,0 +1,2 @@
+?package(roswell):needs="X11|text|vc|wm" section="Applications/see-menu-manual"\
+  title="roswell" command="/usr/bin/roswell"

debian/postinst.ex

@@ -0,0 +1,39 @@
+#!/bin/sh
+# postinst script for roswell
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure)
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/postrm.ex

@@ -0,0 +1,37 @@
+#!/bin/sh
+# postrm script for roswell
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+    ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/preinst.ex

@@ -0,0 +1,35 @@
+#!/bin/sh
+# preinst script for roswell
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <new-preinst> `install'
+#        * <new-preinst> `install' <old-version>
+#        * <new-preinst> `upgrade' <old-version>
+#        * <old-preinst> `abort-upgrade' <new-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    install|upgrade)
+    ;;
+
+    abort-upgrade)
+    ;;
+
+    *)
+        echo "preinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/prerm.ex

@@ -0,0 +1,38 @@
+#!/bin/sh
+# prerm script for roswell
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+#        * <deconfigured's-prerm> `deconfigure' `in-favour'
+#          <package-being-installed> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    remove|upgrade|deconfigure)
+    ;;
+
+    failed-upgrade)
+    ;;
+
+    *)
+        echo "prerm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/roswell-doc.docs

@@ -0,0 +1 @@
+#DOCS#

debian/roswell-doc.install

@@ -0,0 +1 @@
+#DOCS#

debian/roswell.cron.d.ex

@@ -0,0 +1,4 @@
+#
+# Regular cron jobs for the roswell package
+#
+0 4	* * *	root	[ -x /usr/bin/roswell_maintenance ] && /usr/bin/roswell_maintenance

debian/roswell.debhelper.log

@@ -0,0 +1,21 @@
+override_dh_autoreconf dh_autoreconf
+dh_autoreconf
+dh_auto_configure
+dh_auto_build
+dh_auto_test
+dh_prep
+dh_auto_install
+dh_installdocs
+dh_installchangelogs
+dh_perl
+dh_link
+dh_compress
+dh_fixperms
+dh_strip
+dh_makeshlibs
+dh_shlibdeps
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dh_builddeb

debian/roswell.default.ex

@@ -0,0 +1,10 @@
+# Defaults for roswell initscript
+# sourced by /etc/init.d/roswell
+# installed at /etc/default/roswell by the maintainer scripts
+
+#
+# This is a POSIX shell fragment
+#
+
+# Additional options that are passed to the Daemon.
+DAEMON_OPTS=""

debian/roswell.doc-base.EX

@@ -0,0 +1,20 @@
+Document: roswell
+Title: Debian roswell Manual
+Author: <insert document author here>
+Abstract: This manual describes what roswell is
+ and how it can be used to
+ manage online manuals on Debian systems.
+Section: unknown
+
+Format: debiandoc-sgml
+Files: /usr/share/doc/roswell/roswell.sgml.gz
+
+Format: postscript
+Files: /usr/share/doc/roswell/roswell.ps.gz
+
+Format: text
+Files: /usr/share/doc/roswell/roswell.text.gz
+
+Format: HTML
+Index: /usr/share/doc/roswell/html/index.html
+Files: /usr/share/doc/roswell/html/*.html

debian/roswell.substvars

@@ -0,0 +1,2 @@
+shlibs:Depends=libc6 (>= 2.14), libcurl3 (>= 7.16.2)
+misc:Depends=

debian/rules

@@ -0,0 +1,15 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This has to be exported to make some magic below work.
+export DH_OPTIONS
+
+
+override_dh_autoreconf:
+	dh_autoreconf
+
+%:
+	dh "$@" --with=autoreconf 

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/watch.ex

@@ -0,0 +1,23 @@
+# Example watch control file for uscan
+# Rename this file to "watch" and then you can run the "uscan" command
+# to check for upstream updates and more.
+# See uscan(1) for format
+
+# Compulsory line, this is a version 3 file
+version=3
+
+# Uncomment to examine a Webpage
+# <Webpage URL> <string match>
+#http://www.example.com/downloads.php roswell-(.*)\.tar\.gz
+
+# Uncomment to examine a Webserver directory
+#http://www.example.com/pub/roswell-(.*)\.tar\.gz
+
+# Uncommment to examine a FTP server
+#ftp://ftp.example.com/pub/roswell-(.*)\.tar\.gz debian uupdate
+
+# Uncomment to find new files on sourceforge, for devscripts >= 2.9
+# http://sf.net/roswell/roswell-(.*)\.tar\.gz
+
+# Uncomment to find new files on GooglePages
+# http://example.googlepages.com/foo.html roswell-(.*)\.tar\.gz

samples/debian.ros

@@ -0,0 +1,96 @@
+#!/bin/sh
+#|-*- mode: lisp -*-|#
+#|
+exec ros -Q -L sbcl-bin -- $0 "$@"
+|#
+
+(ql:quickload '(:cl-emb :cl-html-parse :drakma :ironclad :uiop) :silent t)
+
+(defvar *pwd* (make-pathname :defaults cl:*load-pathname* :name nil :type nil))
+(defvar *package-name* "roswell")
+
+(defun get-newest-url (base)
+  (block nil
+    (multiple-value-bind (body res)
+	(drakma:http-request
+	 (format nil "https://github.com/~A/releases/" base))
+      (when (= res 200)
+	(net.html.parser:parse-html
+	 body
+	 :callbacks
+	 (list (cons :a (lambda (arg)
+			  (let ((href (getf (cdr (car arg)) :href)))
+			    (when (and (> (length href) 6)
+				       (equal (subseq href (-(length href) 6))
+					      "tar.gz"))
+			      (return-from nil (format nil "https://github.com~A" href)))))))
+	 :callback-only t)))))
+
+(defun download (uri path)
+  (with-open-file (out path :direction :output 
+                    :if-does-not-exist :create
+                    :if-exists :supersede
+                    :element-type '(unsigned-byte 8))
+    
+      (multiple-value-bind (in status)
+          (drakma:http-request uri :want-stream t :force-binary t)
+        (unwind-protect
+             (when (= status 200)
+               (loop :with seq := (make-array 4096 :element-type '(unsigned-byte 8))
+                  :for read := (read-sequence seq in)
+                  :until (= read 0)
+                  :do (write-sequence seq out :end read)))
+          (when in
+            (close in))))))
+
+(defun fetch-upstream ()
+  (let* ((url (get-newest-url "snmsts/roswell"))
+         (path (merge-pathnames (subseq url (1+ (position #\/ url :from-end t))) *pwd*)))
+    (download url path)
+    path))
+
+(defun rename-upstream (path &optional (package-name *package-name*))
+  (let* ((name (pathname-name path))
+         (version (subseq name (position-if #'digit-char-p name)
+                          (1+ (position-if #'digit-char-p name :from-end t))))
+         (new (make-pathname :name (format nil "~A_~A.orig.tar" package-name version)
+                             :defaults path)))
+    (when (probe-file new)
+      (delete-file new))
+    (uiop/os:chdir *pwd*)
+    (uiop/run-program:run-program (format nil "tar xf ~A" (namestring path)))
+    (rename-file path new)
+    new))
+
+(defun cp-debian ()
+  (let ((path (namestring
+               (first ;; should be sort.
+                (remove-if-not 
+                 #'(lambda (x)
+                     (and (not (pathname-name x))
+                          (string-equal "roswell" 
+                                        (first (last (pathname-directory x)))
+                                        :end2 (min 7 (length (first (last 
+                                                                     (pathname-directory x))))))))
+                 (directory (merge-pathnames "*.*" *pwd*)))))))
+    (uiop/run-program:run-program
+     (format nil "cp -r ../debian ~A" path))
+    path))
+
+(defun dpkg-buildpackage (path)
+  (uiop/os:chdir path)
+  (uiop/run-program:run-program "dpkg-buildpackage -us -uc"))
+
+(defun main (&optional (arg0 "all") &rest argv)
+  (declare (ignore argv))
+  (cond ((equal arg0 "all")
+         (let* ((upstream (fetch-upstream)))
+           (rename-upstream upstream))
+         (dpkg-buildpackage (cp-debian)))
+        ((equal arg0 "clean")
+         (format *error-output* "hoge~%"))))
+
+;;(sb-posix:setenv "DEBFULLNAME" "Masatoshi SANO" 1)
+;;(sb-posix:setenv "DEBEMAIL" "snmsts@gmail.com" 1)
+;;"dh_make --yes -c mit -C=m --f ../roswell-0.0.2.22.tar.gz"
+;;"dpkg-buildpackage -us -uc"