This fixes the problem; a consequence of this change is that given the following
scenario:
@@ -1,3 +1,3 @@
1
-2
+2b
3
staging only the line `+2b` will put it *before* the unchanged `2` line, rather
than after it as you might expect (the changed unit tests demonstrate this).
Since this should be a pretty uncommon scenario, I guess it is an ok compromise.
As you can see in the changed tests, while the behavior of what gets staged is
fixed now, it doesn't always correctly select the next line to stage. We'll
address this in the next commit.
This commit implements the ability to cycle backward through different
all branches log visualization modes, complementing the existing forward
cycling functionality. Users can now press 'A' (Shift+a) to cycle in
reverse through the available log graph views, improving navigation
efficiency when they overshoot their desired view.
Changes:
- Added RotateAllBranchesLogIdxBackward() method to BranchCommands for
backward rotation through log command candidates
- Introduced AllBranchesLogGraphReverse keybinding configuration with
default key 'A' (uppercase)
- Implemented switchToOrRotateAllBranchesLogsBackward() handler in
StatusController that mirrors forward cycling logic
- Added English translation for "Show/cycle all branch logs (reverse)"
The implementation uses modulo arithmetic with proper handling of
negative indices to ensure seamless backward cycling through the
available log visualization options.
When .git/info directory does not exist (can happen with bare clones
or manual deletion), the Exclude function failed with 'no such file
or directory'. Added os.MkdirAll to create the directory before
opening the exclude file.
Added integration test exclude_without_info_dir that removes .git/info
before attempting to exclude a file.
The worktrees tab now displays the checked-out branch (or detached HEAD
state) for each worktree, making it much easier to see which worktree
holds which branch.
This is useful when you need to "unlock" a branch that's occupied by
another worktree: you can now clearly see which worktrees are on a
branch vs detached, without having to select each one individually.
Also rename the "(main)" label to "(main worktree)" to avoid confusion
with the common "main" branch name, and move it after the branch column.
Change working tree files and commit files panels to use filtering
(reducing the list) instead of search (highlighting matches). This
matches the behavior of other filterable views.
The text filter matches against the full file path, not just the
filename, which is more useful for navigating large directory trees.
When toggling a directory for a custom patch while a text filter is
active, only the visible filtered files in the directory are affected,
consistent with how staging a directory in the files panel works.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Paths added to ignore/exclude files need to be prefixed with a forward
slash to point to a specific file in the directory tree.
Without that prefix a file at root called `file` (added to `.gitignore`
as `file`) would match with `./file` and `./src/file`.
Not used yet, we pass an empty string everywhere, to match the previous
behavior. Just extracting this into a separate commit to make the next one
smaller.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
When marking commits as good or bad during a bisect, a "git rev-list" call would
appear in the Command log. This is confusing, it's an internal detail that is
not interesting for the user to see.
When opening a PR, a "git ls-remote" call would appear in the Command log. This
is confusing, it's an internal detail that is not interesting for the user to
see.
Codeberg is a Gitea-based git hosting service that uses the same URL
patterns for pull requests and commits. This adds native support so
users don't need to manually configure it.
However, show it when there was an error. This is important for the case that a
fork that you have as a remote was deleted, in which case the command log is the
only way to get notified about that.
This allows for having extra slashes in git urls, for example to avoid
warnings with older bitbake fetcher implementations in yocto. Which
warns about a missing / in git urls
This will put whatever git's default merge variant is as the first menu item,
and add a second item which is the opposite (no-ff if the default is ff, and
vice versa).
If users prefer to always have the same option first no matter whether it's
applicable, they can make ff always appear first by setting git's "merge.ff"
config to "true" or "only", or by setting lazygit's "git.merging.args" config to
"--ff" or "--ff-only"; if they want no-ff to appear first, they can do that by
setting git's "merge.ff" config to "false", or by setting lazygit's
"git.merging.args" config to "--no-ff". Which of these they choose depends on
whether they want the config to also apply to other git clients including the
cli, or only to lazygit.
- Squash and FastForwardOnly are mutually exclusive, and instead of asserting
this at runtime, model the API so that they can't be passed together.
- FastForwardOnly is unused, so remove it; however, we are going to need --ff
and --no-ff in the next commit, so add those instead.
- Instead of putting the enum into the MergeOpts struct, replace the struct by
the enum. We can reintroduce the struct when we add more arguments, but for
now it's an unnecessary indirection.
This is an object that is owned by Gui, is accessible through GuiCommon.State(),
and also passed down to GitCommand, where it is mostly needed. Right now it
simply wraps access to the Git.Paging config, which isn't very exciting, but
we'll extend it in the next commit to handle a slice of pagers (and maintain the
currently selected pager index), and doing this refactoring up front allows us
to make that change without having to touch clients.
Fixes#4890
When Git is configured with status.renames=copies, it can produce
status codes starting with "C" (copy) in addition to "R" (rename).
The file loader was only checking for "R" prefixes, causing copy
operations to be parsed incorrectly and breaking file staging.
This fix extends the status parser to handle both "R" and "C"
prefixes, ensuring proper support for Git's copy detection feature.
Fixes file staging issues when using status.renames=copies configuration.
Our logic to decide if a file needs to be checked out from the previous commit
or deleted because it didn't exist in the previous commit didn't work for
submodules. We were using `git cat-file -e` to ask whether the file existed, but
this returns an error for submodules, so we were always deleting those instead
of reverting them back to their previous state.
Switch to using `git ls-tree -- file` instead, which works for both files and
submodules.
When cycling to the last branch log command, and then editing the config to
remove one or more log commands, lazygit would crash with an out of bounds panic
when returning to it. Fix this by resetting the log index to 0 when it is out of
bounds. (I think resetting to 0 is better than clamping, although it doesn't
matter much.)
I know that uint was chosen to document that it can't be negative (not sure why
the "8" was chosen, though). That's pointless in languages that don't enforce
this though: you can subtract 1 from uint8(0) and you'll get something that
doesn't make sense; that's not any better than getting -1. I'm not a fan of
using unsigned types in general (at least in languages like go or C++), and they
usually just make the code more cumbersome without real benefits.
Some users reported that en_US.UTF-8 is not available on their systems, leading
to warnings in the command log. "C" also forces the language to English, and is
guaranteed to be available everywhere.
Replace merge-tool with merge options menu that allows resolving all
conflicts for selected files as ours, theirs, or union, while still
providing access to the merge tool.
Previously, the feedback you got when pressing "-" was just a "Checking out..."
status in the bottom line. This was both easy to miss if you are used to looking
for an inline status in the branches panel, and it didn't provide information
about which branch was being checked out, which can be annoying in very large
repos where checking out takes a while, and you only see at the end if you are
now on the right branch.
Improve this by trying to figure out which branch was the previously checked out
one, and then checking it out normally so that you get an inline status next to
it (as if you had pressed space on it). There are cases where this fails, e.g.
when the previously checked out ref was a detached head, in which case we fall
back to the previous behavior.
When you delete a branch, we call this function to determine whether we need to
ask for confirmation of not. We don't want to log this, because it's not a
command that a user would normally use as part of this operation.
This is similar to using lazygit's Git.Paging.ExternalDiffCommand config, except
that the command is configured in git. This can be done either with git's
`diff.external` config, or through .gitattributes, so it gives a bit more
flexibility.
Many people don't understand what this means, which is apparent from the amount
of issues that got filed because of this. Let's get rid of it to avoid this
confusion. People will have to configure their pager twice if they want to use
it both on the command line and in lazygit, which I think is not a big deal.
The previous commit already fixed the user-visible lag, but there's still a
problem with multiple background git processes consuming resources calculating
diffs that we are never going to show. Improve this by terminating those
processes (by sending them a TERM signal).
Unfortunately this is only possible on Linux and Mac, so Windows users will have
to live with the higher CPU usage. The recommended workaround is to not use
"diff.algorithm = histogram".
As we just did for tasks, close their stdout pipe instead. This makes the called
process terminate more gracefully.
This isn't a change that we *need* to make, it's just a bit nicer.
Previously we would call git merge-base with the upstream branch to determine
where unpushed commits end and pushed commits start, and also git merge-base
with the main branch(es) to see where the merged commits start. This worked ok
in normal cases, but it had two problems:
- when filtering by path or by author, those merge-base commits would usually
not be part of the commit list, so we would miss the point where we should
switch from unpushed to pushed, or from pushed to merged. The consequence was
that in filtering mode, all commit hashes were always yellow.
- when main was merged into a feature branch, we would color all commits from
that merge on down in green, even ones that are only part of the feature branch
but not main.
To fix these problems, we switch our approach to one where we call git rev-list
with the branch in question, with negative refspecs for the upstream branch and
the main branches, respectively; this gives us the complete picture of which
commits are pushed/unpushed/merged, so it also works in the cases described
above.
And funnily, even though intuitively it feels more expensive, it actually
performs better than the merge-base calls (for normal usage scenarios at least),
so the commit-loading part of refresh is faster now in general. We are talking
about differences like 300ms before, 140ms after, in some unscientific
measurements I took (depends a lot on repo sizes, branch length, etc.). An
exception are degenerate cases like feature branches with hundreds of thousands
of commits, which are slower now; but I don't think we need to worry about those
too much.
This makes it easier to use the full ref in the git merge-base call, which
avoids ambiguities when there's a tag with the same name as the current branch.
This fixes a hash coloring bug in the local commits panel when there's a tag
with the same name as the checked out branch; in this case all commit hashes
that should be yellow were painted as red.
GetMergeBase is always called with a full ref, so it shouldn't need the
ignoringWarnings hack (which is about ignoring warnings coming from ambiguous
refs).
Also, separate stdout and stderr, which would also have solved the problem. We
no longer really need it now, but it's still cleaner.
Also, fix two other commands that stage all files under the hood:
- when continuing a rebase after resolving conflicts, we auto-stage all files,
but in this case we never want to include untracked files, regardless of the
filter
- likewise, pressing ctrl-f to find a base commit for fixup stages all files for
convenience, but again, this should only stage files that are already tracked
It seems that `git for-each-ref` is a lot slower than `git tag --list` when
there are thousands of tags, so revert back to the previous method, now that we
no longer use the IsAnnotated field.
This reverts commit b12b1040c3.
Storing it in the Tag struct makes loading tags a lot slower when there is a
very large number of tags; so determine it on the fly instead. On my machine,
the additional call takes under 5ms, so it seems we can afford it.
Like message, extraField can get very long (when there are thousands of tags on
a single commit), so move it to the end; this allows us to truncate overly long
lines in the output and still get all the essential fields.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
When entering staging (or patch building) for an added or deleted file, it
doesn't make sense to use hunk mode, because pressing space would stage/unstage
the entire file, and if the user wanted to do that, they would have pressed
space in the Files panel. So always use line mode for added/deleted files by
default, even if the useHunkModeInStagingView user config is on.
Not because it's terribly important to test here (doesn't hurt though), but
because it will be useful in the next commit for a new test we're adding there.
When filtering for a file path we use the --follow option for "git log", so it
will follow renames of the file, which is great. However, if you then selected
one of the commits before a rename, you didn't see a diff, because we would pass
the original filter path to the "git show" call.
To fix this, call git log with the --name-status option when filtering by path,
so that each commit reports which file paths are touched in this commit;
remember these in the commit object, so that we can pass them to the "git show"
call later.
Be careful not to store too many such paths unnecessarily. When filtering by
folder rather than file, all these paths will necessarily be inside the original
filter path, so detect this and don't store them in this case.
There is some unfortunate code duplication between loading commits and loading
reflog commits, which I am too lazy to clean up right now.
These are very similar in that they call RunAndProcessLines on a git log command
and then process lines to create commits. Extract this into a common helper
function. At the moment this doesn't gain us much, but in the next commit we
will extend this helper function considerably with filter path logic, which
would otherwise have to be duplicated in both places.
It is good practice to use a -- argument even if no further arguments follow.
Doesn't really make a difference for this particular command though, I think.
This broke with the introduction of the age in the stashes list in bc330b8ff3
(which was included in 0.41, so 12 minor versions ago).
This makes it work again when filtering by file, but it still doesn't work when
filtering by folder (and never has). We'll fix that next.
This was not a good idea, and it seems it has never been tested: the --name-only
and -z options don't work well together. Specifically, -z seems to simply cancel
--name-only.
This is not enough to make it work, we'll need more fixes in the next commit.
This reverts commit 50044dd5e0.
At the same time, we change the defaults for both of them to "date" (they were
"recency" and "alphabetical", respectively, before). This is the reason we need
to touch so many integration tests. For some of them I decided to adapt the test
assertions to the changed sort order; for others, I added a SetupConfig step to
set the order back to "recency" so that I don't have to change what the test
does (e.g. how many SelectNextItem() calls are needed to get to a certain
branch).
When toggling the value in the UI we simply overwrite the value in UserConfig;
this would be bad if there was ever a chance that we want to write the user
config back to disk, but it is very unlikely that we can do that, because
currently we have no way to tell which parts of the config come from the global
config file and which ones come from a repo-local one.
While it's true that the behavior is a little different from the staging panel,
where the staged lines are actually removed from the view and in many cases the
selection stays more or less in the same place, it is still very useful to move
to the next stageable thing in the custom patch building view too.
This improves the experience when selecting a hunk generously with the mouse, by
dragging over it including some context lines above and below. Previously we
would consider the "moving end" of the selection range for whether things need
to be added or removed, but this doesn't make sense if it's a context line. Now
we consider the first actual change line that is included in the range.
It is confusing to get header lines, hunk headers, or context lines rendered as
being included in a custom patch, when including these makes no difference to
the patch.
This is only a visual change; internally, we still record these non-patch lines
as being included in the patch. It doesn't matter though; you can press space on
a header line and nothing happens.
It would probably be cleaner to only record + and - lines in the includedLines
array, but that would be a bit more work, and doesn't seem worth it.
I took the set of enabled checks from revive's recommended configuration [1],
and removed some that I didn't like. There might be other useful checks in
revive that we might want to enable, but this is a nice improvement already.
The bulk of the changes here are removing unnecessary else statements after
returns, but there are a few others too.
[1] https://github.com/mgechev/revive?tab=readme-ov-file#recommended-configuration
The function would return "head/branchname" when there was either a tag or a
remote with the same name.
While fixing this we slightly change the semantic of the function (and of
determineCheckedOutBranchName, which calls it): for a detached head it now
returns an empty string rather than the commit hash. I actually think this is
better.
This would crash with an index-out-of-range error.
I double-checked that all other callers of PrepareInteractiveRebaseCommand
already call getBaseHashOrRoot, so this was the only one that was broken.
I decided not to add a test for this as the scenario is not a very common one.
Pretty basic fix, didn't seem to have any complications.
I only added the refs/ prefix to the FullRefName() method
to align with other similar methods, and to make this change
not impact any user facing modals.
Fixes: https://github.com/jesseduffield/lazygit/issues/4634
Also adds a test demonstrating that the stash show behavior is now fixed
In the unlikely scenario that you have a remote branch on `origin` called
`foo`, and a local tag called `origin/foo`, git changes the behavior of
the previous command such that it produces
```
$ git for-each-ref --sort=refname --format=%(refname:short) refs/remotes
origin/branch1
remotes/origin/foo
```
with `remotes/` prepended. Presumably this is to disambiguate it from
the local tag `origin/foo`. Unfortunately, this breaks the existing
behavior of this function, so the remote branch is never shown.
By changing the command, we now get
```
$ git for-each-ref --sort=refname --format=%(refname) refs/remotes
refs/remotes/origin/branch1
refs/remotes/origin/foo
```
This allows easy parsing based on the `/`, and none of the code outside
this function has to change.
----
We previously were not showing remote HEADs for modern git versions
based on how they were formatted from "%(refname:short)".
We have decided that this is a feature, not a bug, so we are building
that into the code here.
Previously we would enter a newline at the password prompt, which would cause
the fetch to fail. The problem with this was that if you have many remotes, the
fetch would sometimes hang for some reason; I don't totally understand how that
happened, but I guess the many ssh processes requesting passwords would somehow
interfere with each other. Avoid this by simply killing the git fetch process
the moment it requests the first password.
This is a regression introduced with a199ed1396c; it is important to use a PTY
even with credentialStrategy=FAIL, otherwise the fetch command will spew the
credentials request into the UI and then hang.
This fixes the problem that background fetching makes lazygit hang when the
fetch request needs to prompt for a passphrase. For Mac users who use the
keychain to store their ssh passphrases, this can happen when lazygit is running
while the machine goes to sleep, because macOS looks the keychain in that case.
This now allows for leaving the status panel and returning back to the
same log command. Previously any return to the status panel would result
in the next command in the list being shown. Now, you need to press `a`,
with a log command being rendered, to rotate to the next
allBranchesLogCmd.
BeginInteractiveRebaseForCommit is used for all the patch commands, and for
rewording. It works by setting the commit we want to stop at to 'edit'; this
doesn't work for merge commits. This wasn't a problem for the patch commands so
far, because you typically don't use custom patches with merge commits (although
we don't prevent this; maybe we should?).
However, it was a problem when you tried to reword a merge commit; this
previously failed with an error, as the test added in the previous commit
demonstrated.
Also, we want to add a new patch command that has to stop *before* the selected
commit (pull patch to new commit before the original one), and this wouldn't
work for the first commit in a feature branch, because it would have to set the
last commit before that to 'edit', which isn't possible if that's a merge (which
is likely).
To fix all this, use a 'break' before the selected commit if the commit is a
merge. It is important that we only do it in that case and not always, otherwise
we would break the new regression tests that were added a few commits ago.
This decouples StreamOutput from whether a PTY is used. In most cases we just
want to see the output in the log window, but don't have to use a PTY, e.g. for
the bisect commands.
This has the implication that custom commands that are using "stream: true" no
longer use a PTY. In most cases that's probably a good thing, but we're going to
add a separate pty config for those who really wanted this.
Change the base type of some of our enums from int to uint8, and reorder fields
for better packing. This reduces the size of models.Commit from 152 to 132 bytes
on my machine.
This doesn't improve overall memory usage significantly, but why not save a
little bit of memory if it's easy.
We need to pass %P instead of %p in the format string of the git log command, so
that the parent hashes have the full length and can be shared with the real
hashes.
This in itself is not an improvement, because hashes are unique (they are shared
between real commits and rebase todos, but there are so few of those that it
doesn't matter). However, it becomes an improvement once we also store parent
hashes in the same pool; but the real motivation for this change is to also
reuse the hash pointers in Pipe objects later in the branch. This will be a big
win because in a merge-heavy git repo there are many more Pipe instances than
commits.
Fish shell does not support "&&" and "||" operators like
POSIX-compatible shells. Instead, it uses a different syntax structure
based on begin/end and if/else.
This caused existing lazygit nvim-remote integration templates to break
when fish was the user's default shell.
This commit adds explicit fish shell detection using the FISH_VERSION
environment variable, and provides fish-compatible templates that
correctly handle launching Neovim or sending remote commands via $NVIM.
Fixes behavior where edits would not open in a new Neovim tab or line
navigation would fail when $NVIM was set.
Ensures smoother editing experience for users running fish shell
(supported since Nov 2012 with FISH_VERSION).
We do this because
- it's closer to what you would do on the command line
- it simplifies the code a bit
- it will allow us to support cherry-picking merge commits.
What happens here is that when stopping on an "edit" todo entry, we rely on the
assumption that if the .git/rebase-merge/amend file exists, the command was
successful, and if it doesn't, there was a conflict. The problem is that when
you stop on an edit command, and then run a multi-commit cherry-pick or rebase,
this will delete the amend file. You may or may not consider this a bug in git;
to work around it, we also check the existence of the rebase-merge/message file,
which will be deleted as well by the cherry-pick or revert.
MergeRebasingCommits already merges the rebasing commits into the commits slice
that is passed in, so it doesn't make sense to append the result to commits
again. It isn't a problem, but only because commits is always empty.
It is useful to see if the conflicted commit was a "pick" or an "edit". What's
more, we're about to add support for showing cherry-picks and reverts, and
seeing that a conflicted commit was a revert is important because its diff is
backwards compared to the diff of the conflicting files in the Files panel.
This is equivalent in the current state of the code, but it will no longer be
after the next commit, because we will introduce a new status value
StatusConflicted. And in a later PR we might add yet another value
StatusCherryPicking to distinguish rebase todos from cherry-pick todos; using
commit.IsTODO is a safer way to check whether a commit is any of these.
It looks like enums.go was supposed to be file that collects a bunch of enums,
but actually there's only one in there, and since it has methods, it deserves to
be in a file of its own, named after the type.
- Remove REBASE_MODE_NORMAL. It is not the "normal" mode anyway, rather a legacy
mode; we have removed support for it in eb0f7e3d02, so there's no point in
representing it in the enum.
- Remove distinction between REBASE_MODE_REBASING and REBASE_MODE_INTERACTIVE;
these are the same now.
- Rename StatusCommands.IsInInteractiveRebase to IsInRebase.
- Remove StatusCommands.RebaseMode; use StatusCommands.IsInRebase instead.
All test cases set it to enums.REBASE_MODE_NONE, so we can simplify things a
little bit by hard-coding that. This makes the changes in the following commits
a little easier.
