All this does is clear the preserved commit message; however, we open the commit
message panel with PreserveMessage: false when rewording, so this is not
necessary.
In ff4ae4a544 we changed the order of the calls to render before selecting the
branch. This was done only to save an extra call to ReApplyFilter, which is done
by refreshView; I claimed that the order of refreshView vs. SetSelectedLineIdx
doesn't matter here. I guess I was wrong about that, it makes the integration
test custom_commands/suggestions_preset.go flaky. To fix this, put the
refreshView call back to where it was (after the SetSelectedLineIdx call), and
instead insert an extra call to ReApplyFilter where necessary to fix the bug
that ff4ae4a544 was trying to fix.
This is very similar to the same menu in the Files panel, except that it works
on whatever diff is currently shown in the main view, including range diffs
either in diffing mode (shift-W), or from a range selection of commits.
When pasting a multi-line commit message into the subject field of the commit
editor, we would interpret the first newline as the confirmation for closing the
editor, and then all remaining characters as whatever command they are bound to,
resulting in executing all sorts of arbitrary commands.
Now we recognize this being a paste, and interpret the first newline as moving
to the description.
Also, prevent tabs in the pasted content from switching to the respective other
panel; simply insert four spaces instead, which should be good enough for the
leading indentation in pasted code snippets, for example.
Jesse's comment from https://github.com/jesseduffield/lazygit/issues/4237:
We recently added a new option to check out a commit's branch from within the
commits, reflog, and sub-commits panels:
https://github.com/user-attachments/assets/0a5cf3f2-6803-4709-ae5a-e4addc061012
After using it for some time, I find it annoying that the default option has
changed. I rarely find myself wanting to check out a branch from the commits
panel, and it's rarer still to want to check out a branch from the reflog and
sub-commits panel. Although there may be use cases for this, it is jarring that
something you can always do (checkout the commit) is harder to do than something
that you can sometimes do (checkout the branch).
We've also had a user complain (see
https://github.com/jesseduffield/lazygit/pull/4117) about their muscle-memory
being broken by the recent change, and I have also fallen victim to this. I
don't think that the new branch checkout option is sufficiently useful to
dislodge the existing keybinding, so let's swap them.
The code that tries to reselect the same branch again uses GetItems, which in
case of filtering is the filtered list. After replacing the branches slice with
a new one, the filtered list is no longer up to date, so we must reapply the
filter before working with it. It so happens that refreshView does that, so
simply call that before setting the selection again; I don't think the order
matters in this case. Otherwise we'd have to insert another call to
ReApplyFilter before the call to GetItems, which we can avoid this way.
Note that this doesn't actually make anything work better in the case of
deleting a branch, since we can't reselect the deleted branch anyway of course.
But it avoids a possible crash if the branch that was deleted was the last one
in the unfiltered list.
This includes the "only conflicting" status that the user can't switch to
themselves. We display it anyway to give a hint that files are being filtered,
and to let them know that they can turn the filter off if they want to.
I renamed the "Reset filter" item to "No filter" to make it look more like a
state than an action, so that it fits the radio button concept better.
When there are conflicts and we set the filter to show only conflicting files,
then none of the radio buttons light up, which is slightly strange. I guess it's
ok though.
We don't need to maintain additional state to allow this; all we need to do is
take over the filter only when the number of conflicting files goes from zero to
non-zero, rather than every time it is non-zero.
The only problem is that we don't allow users to go back to showing only
conflicted files, but that's just because we don't have that as an entry in the
menu. And I don't think it's a problem.
This handles the situation where the user's own config says to not show
untracked files, as is often the case with bare repos managing a user's
dotfiles.
Git diff and patch doesn't work reliably with a context size of 0, so disable it
in this case (and discarding changes as well). Magit does the same, see
https://github.com/magit/magit/issues/4222.
Staging entire files by pressing space in the Files panel is still possible, of
course.
When pushing a branch that didn't have an upstream yet, we use the command line
git push --set-upstream origin HEAD:branch-name
The HEAD: part of this is too unspecific; when checking out a different branch
while the push is still running, then git will set the upstream branch on the
newly checked out branch, not the branch that was being pushed. This might be
considered a bug in git; you might expect that it resolves HEAD at the beginning
of the operation, and uses the result at the end.
But we can easily work around this by explicitly supplying the real branch name
instead of HEAD.
For editable views it is important to actually show the blank line so that we
can put the cursor there for typing.
This fixes problems with adding blank lines at the end of longer commit
messages.
There are two ways to jump to the editor on a specific line: pressing `e` in the
staging or patch building panels, or clicking on a hyperlink in a delta diff. In
both cases, this works perfectly in the unstaged changes view, but in other
views (either staged changes, or an older commit) it can often jump to the wrong
line; this happens when there are further changes to the file being viewed in
later commits or in unstaged changes.
This commit fixes this so that you end up on the right line in these cases.
When the user checks out a commit which has a local branch ref attached
to it, they can select between checking out the branch or checking out
the commit as detached head.
Sometimes we populate the commit message panel with a pre-created commit
message. The two cases where this happens is:
- you type `w` to commit, in which case we put the skipHookPrefix in the subject
- you have a commitPrefix pattern, in which case we match it against the branch
name and populate the subject with the replacement string if it matches
In either case, if you have a preserved commit message, we use that.
Now, when you use either of these and then cancel, we preserve that initial,
unchanged message and reuse it the next time you commit. This has two problems:
it strips spaces, which is a problem for the commitPrefix patterns, which often
end with a space. And also, when you change your config to experiment with
commitPrefix patterns, the change seemingly doesn't take effect, which can be
very confusing.
To fix both of these problems, only preserve the commit message when it is not
identical to the initial message.
So far, lines in the view corresponded 1:1 to lines in the patch. Once we turn
on wrapping for the staging view (which we don't do yet), this is no longer
true, so we need to convert from view lines to patch lines or vice versa all
over the place.
to make it more generally usable by clients other than ConfirmationHelper, which
we will do later in this branch. Rename it to WrapViewLinesToWidth while we're
at it.
Add tests; in particular, add a sanity check that we wrap lines the same way as
gocui does. The tests that are added here are the same ones as in gocui for its
lineWrap function, but we'll extend them a bit in later commits in this branch.
This is also what we do in the staging controller, and it makes it so that when
you exit the patch building view and then enter it again (for another file, or
the same one) we select the first hunk again.
For non-merge commits we change "pick" to "drop" when we delete them. We do this
so that we can use the same code for dropping a commit no matter whether we are
in an interactive rebase or not. (If we aren't, we could just as well delete the
pick line from the todo list instead of setting it to "drop", but if we are, it
is better to keep the line around so that the user can change it back to "pick"
if they change their mind.)
However, merge commits can't be changed to "drop", so we have to delete them
from the todo file. We add a new daemon instruction that does this.
We still don't allow deleting a merge commit from within an interactive rebase.
The reason is that we don't show the "label" and "reset" todos in lazygit, so
deleting a merge commit would leave the commits from the branch that is being
merged in the list as "pick" commits, with no indication that they are going to
be dropped because they are on a different branch, and the merge commit that
would have brought them in is gone. This could be very confusing.
Not much of a change in behavior, because moving merge commits was already not
possible. However, it failed with a cryptic error message ("Todo fa1afe1 not
found in git-rebase-todo"), so disable it properly instead.
It is needed by both call sites of this function. This has the added benefit
that the argument doesn't unnecessarily show up in the status view when diffing
mode is on.
In 67b8ef449c we changed the "edit" command to insert a "break" after the
selected commit, rather than setting the selected todo to "edit". The reason for
doing this was that it now works for merge commits too.
Back then, I claimed "In most cases the behavior is exactly the same as before."
Unfortunately that's not true, there are two reasons why the previous behavior
was better (both are demonstrated by tests earlier in this branch):
- when editing the last commit of a branch in the middle of a stack of branches,
we are now missing the update-ref todo after it, which means that amending the
commit breaks the stack
- it breaks auto-amending (see the added test earlier in this branch for an
explanation)
For these reasons, we are going back to the previous approach of setting the
selected commit to "edit" whenever possible, i.e. unless it's a merge commit.
The only scenario where this could still be a problem is when you have a stack
of branches, and the last commit of one of the branches in the stack is a merge
commit, and you try to edit that. In my experience with stacked branches this is
very unlikely, in almost all cases my stacked branches are linear.
We allow deleting remote branches (or local and remote branches) only if *all*
selected branches have one.
We show the a warning about force-deleting as soon as at least one of the
selected branches is not fully merged.
The added test only tests a few of the most interesting cases; I didn't try to
cover the whole space of possible combinations, that would have been too much.
Since we want to select multiselections, this will make it easier to pass a
slice of remote branches. It does require that for the case of the local
branches panel we need to synthesize a RemoteBranch object from the selected
local branch, but that's not hard.
Original commit message of the gocui change:
This fixes View.Size, Width and Height to be the correct (outer) size of a view
including its frame, and InnerSize/InnerWidth/InnerHeight to be the usable
client area exluding the frame. Previously, Size was actually the InnerSize (and
a lot of client code used it as such, so these need to be changed to InnerSize).
InnerSize, on the other hand, was *one* less than Size (not two, as you would
have expected), and in many cases this was made up for at call sites by adding 1
(e.g. in calcRealScrollbarStartEnd, parseInput, and many other places in the
lazygit code).
There are still some weird things left that I didn't address here:
- a view's lower-right coordinates (x1/y1) are one less than you would expect.
For example, a view with a 2x2 client area like this:
╭──╮
│ab│
│cd│
╰──╯
in the top-left corner of the screen (x0 and y0 both zero) has x1/xy at 3, not
4 as would be more natural.
- a view without a frame has its coordinates extended by 1 on all sides; to
illustrate, the same 2x2 view as before but without a frame, sitting in the
top-left corder of the screen, has coordinates x0=-1, y0=-1, x1=2, y1=2. This
is highly confusing and unexpected.
I left these as they are because they would be even more of a breaking change,
and also because they don't have quite as much of an impact on general app code.
When creating a PR against a selected branch (via O = "create pull request
options"), the user will first be asked to select a remote (if there is more
than one). After that, the suggestion area is populated with all remote branches
at that origin - instead of all local ones. After all, creating a PR against a
branch that doesn't exist on the remote won't work.
Please note that for the "PR is not filed against 'origin' remote" use case
(e.g. when contributing via a fork that is 'origin' to a GitHub project that is
'upstream'), the opened URL will not be correct. This is not a regression and
will be fixed in an upcoming PR.
Fixes#1826.
As far as I understand, this was needed back when the staging context was still
responsible for rendering its highlight (as opposed to the gocui view, as it is
today). It was necessary to call it with isFocused=false so that it removed the
highlight. The isFocused bool is no longer used today (and we'll remove it in
the next commit), so there's no need to render the view here any more.
This fixes flickering when leaving the staging view by pressing escape. The
reason is that in this case the patch state was already set to nil by the time
we get here, so we would render an empty view for a brief moment.
On top of that, it fixes unwanted scrolling to the top when leaving the staging
view. The reason for this is that we have code in layout that scrolls views up
if needed, e.g. because the window got taller or the view content got shorter
(added in #3839). This kicked in because we emptied the view, and scrolled it
all the way to the top, which we don't want.
After pasting commits once, we hide the cherry-picking status (as if it had been
reset), and no longer paint the copied commits with blue hashes; however, we
still allow pasting them again. This can be useful e.g. to backport a bugfix to
multiple major version release branches.
Currently we try to delete a branch normally, and if git returns an error and
its output contains the text "branch -D", then we prompt the user to force
delete, and try again using -D. Besides just being ugly, this has the
disadvantage that git's logic to decide whether a branch is merged is not very
good; it only considers a branch merged if it is either reachable from the
current head, or from its own upstream. In many cases I want to delete a branch
that has been merged to master, but I don't have master checked out, so the
current branch is really irrelevant, and it should rather (or in addition) check
whether the branch is reachable from one of the main branches. The problem is
that git doesn't know what those are.
But lazygit does, so make the check on our side, prompt the user if necessary,
and always use -D. This is both cleaner, and works better.
See this mailing list discussion for more:
https://lore.kernel.org/git/bf6308ce-3914-4b85-a04b-4a9716bac538@haller-berlin.de/
This might seem controversial; in many cases the client code gets longer,
because it needs an extra line for an explicit `return nil`. I still prefer
this, because it makes it clearer which calls can return errors.
This solves several problems that arise from opening a menu while the prompt is
open. We might try to solve these in a different way, e.g. by dismissing the
search prompt before opening a menu, but restricting what you can do while the
prompt is open seems like the more robust fix.
To achieve this, we
- call resetKeyBindings both when opening and when closing the search/filter
prompt
- change the keybindings to only contain the ones for the search prompt when
that context is active.
We make the name of the GetSelectedRefRangeForDiffFiles very specific on purpose
to make it clear that this is only for switching to diff files, so the
implementations can make assumptions about that (unlike GetSelectedRef, which is
used for different purposes and needs to stay more generic).
Right now it doesn't do very much yet, but it's still worth it even in this
state, I'd say. The function is going to become a bit longer in the next commit,
though.
In other views that show lists of commits (reflog and stash) it doesn't make
sense to show a range diff of selected entries because they don't form a linear
sequence, so we keep the previous behavior of showing the diff for the free end
of the selection range in those view.
The same applies to the commits view if the selection range includes rebasing
todos; these can have an arbitrary order, and a range diff doesn't make sense
for those.
Hopefully this will help alleviate the problem that diffing mode is sticky, and
you often forget that it's still on.
Make it magenta like the mode text in the information view.
This fixes two problems:
- Set the title ref to the commit description (like
SwitchToDiffFilesController.enter does), rather than just the hash
- SetTitleRef only sets the title of the DynamicTitleBuilder, but doesn't set it
on the view; this only happens in ContextMgr.Activate, so you'd have to switch
to a different side panel and then back to see the new title.
The three nested `if` statements may looks strange, and you might wonder why we
don't have single one with &&. The answer is that later in this branch we will
add an `else` block to the middle one.
In the next commit it will be reused for checking whether we need to reset the
patch; and extracting it makes it easier to extend it for non-sticky diff ranges
later in the branch.
viewFiles is only called from enter; it doesn't make much sense to fill in a
SwitchToCommitFilesContextOpts struct to pass it to viewFiles for this one call.
Simply inline viewFiles into enter and get rid of all that.
I found this indirection confusing when reading the code. It looks like
SwitchToDiffFilesController is instantiated with different such contexts, but
it's always Contexts.CommitFiles, so just use that directly.
It is already possible to search a filtered list by searching first, and then
enabling a filter, so I found it inconsistent to not allow searching when you
are already filtering. One reason for not allowing this might be that the search
status (on the left) hides the filter status (on the right), but if we think
that's enough reason to not allow both at the same time, then we should cancel a
search when we enter filtering.
It doesn't seem to be used by anything, it looks like we only need to implement
the method so that the IController interface is satisfied. But still, it doesn't
hurt to be correct here, and might avoid confusion in the future when somebody
does try to use the method.
It still doesn't update the view immediately when reloading the config, only the
next time the status panel is focused. But at least it does it then; writing the
code to update the panel when reloading the config is probably not justifiable.
The comments that I'm deleting here explain why we need the bool; however, in
our case that's a theoretical issue. It would only arise if we ever were to pass
a nil context to SetParentContext, which we never do.
Also, use the user's shell (from the SHELL env variable) instead of bash. Both
of these together allow users to use their shell aliases or shell functions in
the interactive command prompt.
The current behaviour when creating a new branch off of a remote branch
is to always track the branch it was created from.
For example, if a branch 'my_branch' is created off of the remote branch
'fix_crash_13', then 'my_branch' will be tracking the remote
'fix_crash_13' branch.
It is common practice to have both the local and remote branches named
the same when the local is tracking the remote one. Therefore, it is
reasonable to expect that 'my_branch' should not track the remote
'fix_crash_13' branch.
The new behaviour when creating a new branch off of a remote branch is
to track the branch it was created from only if the branch names match.
If the branch names DO NOT match then the newly created branch will not
track the remote branch it was created from.
For example, if a user creates a new branch 'fix_crash_13' off of the
remote branch 'fix_crash_13', then the local 'fix_crash_13' branch will
track the remote 'fix_crash_13' branch.
However, if the user creates a new branch called 'other_branch_name' off
of the remote branch 'fix_crash_13', then the local 'other_branch_name'
branch will NOT track the remote 'fix_crash_13' branch.
The default shortcut to open git difftool (ctrl+t) is not available on
the "Local Branches" window. It is available when selecting a commit
from a local branch, a remote branch, or a tag from the "Local Branches"
window.
This is inconsistent since branches or tags are also commits, the
shortcut should also work on them directly.
This commit remedies this inconsistency by allowing the use of the
shortcut directly on a branch or a tag. The shortcut works both in the
"standard" mode and the "diffing" mode.
The highlight is normally turned off in HandleFocusLost, but that's not called
when using ReplaceContext (and changing this would be a lot of work, it seems),
so turn it off manually here for now.
Probably not the most import feature in the world, but when resizing the
terminal window while multiple popup panels were open at the same time, we would
only resize the topmost one.
The main reason for changing this is because it makes the next commit easier to
implement.
This is how we do it for confirmation with suggestions too, so be consistent. It
will make things easier later in this branch if we only have one context per
"panel" on the stack, even if the panel consists of two views.
Concretely this means:
- only push the message context onto the stack when opening the panel (this
requires making the description view visible manually; we do the same for
suggestions)
- when switching between message and description, use ReplaceContext rather than
PushContext
We forgot to handle the "suggestions" and "commitDescription" view names.
Instead of listing all the names of views that can appear in popups though,
let's use the context kind for this, which feels more robust.
This is a change in behavior: previously, clicking outside of the search or
filter prompt would close the prompt, now it no longer does (because search has
a persistent popup kind, but it wasn't listed in the list of view names before).
runewidth.StringWidth is an expensive call, even if the input string is pure
ASCII. Improve this by providing a wrapper that short-circuits the call to len
if the input is ASCII.
Benchmark results show that for non-ASCII strings it makes no noticable
difference, but for ASCII strings it provides a more than 200x speedup.
BenchmarkStringWidthAsciiOriginal-10 718135 1637 ns/op
BenchmarkStringWidthAsciiOptimized-10 159197538 7.545 ns/op
BenchmarkStringWidthNonAsciiOriginal-10 486290 2391 ns/op
BenchmarkStringWidthNonAsciiOptimized-10 502286 2383 ns/op
In d5b4f7bb3e and 58a83b0862 we introduced a combined mechanism for rerendering
views when either their width changes (needed for the branches view which
truncates long branch names), or the screen mode (needed for those views that
display more information in half or full screen mode, e.g. the commits view).
This was a bad idea, because it unnecessarily rerenders too many views when just
their width changes, which causes a noticable lag. This is a problem, for
example, when selecting a file in the files panel that has only unstaged
changes, and then going to one that has both staged and unstaged changes; this
splits the main view, causing the side panels to become a bit narrower, and
rerendering all those views took almost 500ms on my machine. Another similar
example is entering or leaving staging mode.
Fix this by being more specific about which views need rerendering under what
conditions; this improves the time it takes to rerender in the above scenarios
from 450-500s down to about 20ms.
This reintroduces the code that was removed in 58a83b0862, but in a slightly
different way.
Strike it through if not applicable. This will hopefully help with confusion
about the meaning of "all" in the "Discard all changes" entry; some people
misunderstand this to mean all changes in the working copy. Seeing the "Discard
unstaged changes" item next to it hopefully makes it clearer that "all" is meant
in contrast to that.
Several custom patch commands on parts of an added file would fail with the
confusing error message "error: new file XXX depends on old contents". These
were dropping the custom patch from the original commit, moving the patch to a
new commit, moving it to a later commit, or moving it to the index.
We fix this by converting the patch header from an added file to a diff against
an empty file. We do this not just for the purpose of applying the patch, but
also for rendering it and copying it to the clip board. I'm not sure it matters
much in these cases, but it does feel more correct for a filtered patch to be
presented this way.
We're going to add another argument in the next commit, and that's getting a bit
much, especially when most of the arguments are bool and you only see true and
false at the call sites without knowing what they mean.
Unfortunately it isn't possible to delete them. This would often be useful, but
our todo rewriting mechanisms rely on being able to find todos by some
identifier (hash for pick, ref for update-ref), and exec todos don't have a
unique identifier.
If exactly one candidate from inside the current branch is found, we return that
one even if there are also hunks belonging to master commits; we disregard those
in this case.
Copy the slice into a variable and use that throughout the whole operation; this
makes us a little more robust against the model refreshing concurrently.
Put it into the individual menu items instead.
Again, this is necessary because we are going to add another entry to the menu
that is independent of the selected branch.
Instead, disable the individual entries in the menu.
This is necessary because we are going to add another entry to the menu that is
independent of the selected branch.
Previously the entire status was colored in a single color, so the API made
sense. This is going to change in the next commit, so now we must include the
color in the string returned from BranchStatus(), which means that callers who
need to do hit detection or measure the length need to decolorize it.
While we're at it, switch the order of ↑3↓7 to ↓7↑3. For some reason that I
can't really explain I find it more logical this way. The software out there is
pretty undecided about it, it seems: VS Code puts ↓7 first, and so does the
shell prompt that comes with git; git status and git branch -v put "ahead" first
though. Shrug.
We aren't using them, yet, except for deciding whether to show the warning about
hunks with only added lines.
Add a bit of test coverage for parseDiff while we're at it.
This broke with 81b497d186 (#3387). In that PR I claimed that we never want to
ask for force-pushing if the server rejected the update, on the assumption that
this can only happen because the remote tracking branch is not up to date, and
users should just fetch in this case. However, I didn't realize it's even
possible to have a branch whose upstream branch is not stored locally; in this
case we can't tell ahead of time whether a force push is going to be necessary,
so we _have_ to rely on the server response to find out. But we only want to do
that in this specific case, so this is not quite an exact revert of 81b497d186.
When branches are sorted by recency we have this logic that first loads the
branches so that they can be rendered quickly; in parallel, it starts loading
the reflog in the background, and when that's done, it loads the branches again
so that they get their recency values. This means that branches are loaded twice
at startup.
We don't need this logic when branches are not sorted by recency, so we can
simply load branches and reflog in parallel like everything else.
This shouldn't change any user observable behavior, it just avoids doing
unnecessary work at startup.
For tooltips that are just one or two characters longer than the available
width, the last word would be cut off. On my screen this happened for the
tooltip for the fixup command.
To determine whether we need to ask for force pushing, we need to query the push
branch rather than the upstream branch, in case they are not the same.
In go 1.22, loop variables are redeclared with each iteration of the
loop, rather than simple updated on each iteration. This means that we
no longer need to manually redeclare variables when they're closed over
by a function.
For custom commands it is useful to select an earlier command and have it copied
to the prompt for further editing. This can be done by hitting 'e' now.
For other types of suggestion panels we don't enable this behavior, as you can't
create arbitrary new items there that don't already exist as a suggestion.
In the custom commands panel you can now tab to the suggestions and hit 'd' to
delete items from there. Useful if you mistyped a command and don't want it to
appear in your history any more.
Sometimes it takes a while to get PRs accepted upstream, and this blocks our
progress. Since I'm pretty much the only one making changes there anyway, it
makes sense to point to my fork directly.
This lets us get rid of a few more calls to Error(), and it simplifies things
for clients of OnWorker: they can simply return an error from their callback
like we do everywhere else.
We upgraded our minimum Go version to 1.21 in commit
57ac9c2189. We can now replace our
`utils.Min` and `utils.Max` functions with the built-in `min` and `max`.
Reference: https://go.dev/ref/spec#Min_and_max
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
When exiting filtering mode, we currently keep the selection index the same in
the commits panel. This doesn't make sense at all, since the index in the
filtered view has no relation to the index in the unfiltered view.
I often use filtering mode (either by path or by author) to find a given commit
faster than I would otherwise be able to. When exiting filtering mode, it's
useful to keep the same commit selected, so that I can look at the surrounding
commits, see which branch it was a part of, etc. So reselect the commit again
after exiting filtering mode.
Sometimes this is not possible, most likely when the commit is so long ago that
it's outside of the initial 300 range. In that case, at least select the commit
again that was selected before I entered filtering; this is still better than
arbitrarily keeping the same selection index.
To support this, we turn the confirmation prompt of the "Create fixup commit"
command into a menu; creating a fixup commit is the first entry, so that
"shift-F, enter" behaves the same as before. But there are additional entries
for creating "amend!" commits, either with or without file changes. These make
it easy to reword commit messages of existing commits.
We pass all of them to a single editor command, hoping that the editor will be
able to handle multiple files (VS Code and vim do).
We ignore directories that happen to be in the selection range; this makes it
easier to edit multiple files in different folders in tree view. We show an
error if only directories are selected, though.
We've seen a lot of issues recently where people complain that lazygit doesn't
behave as documented, but that was only because they were running the latest
release but were looking at the documentation of master. Make the documentation
links in the status panel point to the release that they are using in the hope
that this will help a little bit with this problem.
Some operations don't support switching to the editor from the commit message
panel; an example is the commit message panel that appears when moving a custom
patch into a new commit. Disable the "open in editor" menu entry in this case,
instead of silently doing nothing.
By default we now search for substrings; you can search for multiple substrings
by separating them with spaces. Add a config option gui.filterMode that can be
set to 'fuzzy' to switch back to the previous behavior.
Lazygit has two ways to decide whether it needs to ask the user to force-push:
1. if it knows ahead of time that the push will fail because the branch has
diverged, by looking at the incoming/outgoing information that it shows as ↑3↓7.
2. by examining the error that comes back when the push has failed.
The second situation should happen only rarely, because lazygit fetches every
minute by default, so the ↑3↓7 information is usually up to date. It might not
be if the user turned off auto-fetch (or increased the auto-fetch interval).
However, in this case it's almost always harmful to prompt the user to
force-push, because we know that the reason for diverging is that something was
pushed to the remote, and we would wipe it out by force-pushing. In such a
situation, the more likely user action is to pull the remote changes and then
push normally again.
So just remove the second prompt, and replace it by a better error message when
we detect that updates were rejected remotely.
A little bit of history archeology reveals that the second prompt was added at a
time where we didn't have the first one yet, so at that time it made sense to
have it; but when the first prompt was added, we should have removed the second.
... and when recalling a commit message from an old commit by pressing up-arrow.
This is necessary because committing turns our soft line breaks into real ones,
but when rewording we want to turn them back into soft ones again, so that it's
possible to insert words at the beginning of a paragraph and have everything
rewrap nicely.
This is only a best effort; the algorithm only removes those hard line breaks
that can be removed without changing the way the message looks. This works well
when the previous commit message was wrapped at the same width, which for most
users should be the most common case; but if it wasn't, the result is not great.
Specifically, if the old wrap width was smaller, some hard line breaks just
won't be removed; if it was wider though, you'll get an unpleasant comb effect
with alternating long and short lines. In such a case it's best to switch to the
editor and use whatever wrapping features you have there (e.g. alt-Q).
This should arguably have been done in b133318b40 already; it's becoming more
important now because we're going to extend the common code with more logic in
the next commit.
It starts a rebase on the bottom-most commit of the range, and sets all the
selected commits to "edit" (skipping merge commits, because they can't be
edited).
A common workflow for me is to create a fixup commit from only some of my
current changes; to do that, I enter a file, stage a few hunks, and then want to
invoke ctrl-f to find the base commit for these changes. Currently I need to esc
back to the files panel in order to do that; it's more convenient to be able to
do this right from the staging panel.
This commit introduces a new feature to the commit view, allowing users
to filter commits based on the author's name or email address. Similar
to the existing path filtering functionality, accessible through <c-s>,
this feature allows users to filter the commit history by the currently
selected commit's author if the commit view is focused, or by typing in
the author's name or email address.
This feature adds an entry to the filtering menu, to provide users with
a familiar and intuitive experience
Calling "git reset" on the command line (without further arguments) defaults to
--mixed, which is reason enough to make it the default for us, too.
But I also find myself using --mixed more often than --soft. The main use case
for me is that I made a bunch of WIP commits, and want to turn them into real
commits when I'm done hacking. I select the last commit before the WIP commits
and reset to it, leaving all changes of all those commits in the working
directory. Since I want to start staging things from there, I prefer those
modifications to be unstaged at that point, which is what --mixed does.
This fixes two problems:
- each time the custom commands panel was opened, the history of commands would
be shown in reversed order compared to last time. (The reason is that
lo.Reverse modifies the slice in place rather than just returning a new,
reversed slice.)
- when executing a previous command again (either by typing it in again, or by
picking it from the history), it should move to the beginning of the history,
but didn't.
We fix this by storing the history in reversed order (as the user sees it in
the panel), this makes the logic simpler. We just have to prepend rather
than append newly added commands now.
While this is theoretically a breaking change, it's not worth bothering because
the order was wrong for existing users in 50% of the cases anyway.
Scenario:
- show the files of a commit, escape out of it again
- start an interactive rebase of a stack of branches, with the rebase.updateRefs
git config set to true
- select one of the update-ref todos
- trigger a refresh (either manually or by bringing lazygit's terminal window to
the front)
This results in an error message "fatal: ambiguous argument '': unknown revision
or path not in the working tree."
Fix this by putting another band-aid on the check for the commit files refresh.
This is the easiest way to fix the problem, but I don't think it's the best one.
We shouldn't be refreshing the commit files context at all if it isn't visible,
because it's pointless; there's no way to switch to it again except by calling
viewFiles again with a specific ref. But I'm too lazy too figure out how to do
that right now.
After discarding file changes from the commit, the was still referencing
these indexes as being part of the range select. The consequence was
needing to hit escape twice to exit commit files in some situations.
Canceling the range select after discarding changes fixes that.
The waiting status shouldn't happen until after the user has responded
to the popup.
Since we're not giving a standalone prompt about clearing the patch, all
of the business in `discard` doesn't need to be in a function any more
It can be tedious after each cherry-pick opearation to clear the
selection by pressing escape in order for lazygit to stop displaying
info about copied commits. Also, it seems to be a rare case to
cherry-pick commits to more than one destination.
The simplest solution to address this issue is to clear the selection
upon paste.
The only exception is a merge conflict. Initially, I wanted to clear
selected commits in this scenario too. During a discussion we found out
that it may be convenient to have the copied commits still around.
Aborting the rebase and pasting the commits in the middle of a branch
can be a valid use case.
To do that, change the "Apply fixup commits" command to show a menu with the two
choices "in current branch" and "above the selected commit"; we make "in current
branch" the default, as it's the more useful one most of the time, even though
it is a breaking change for those who are used to "shift-S enter" meaning
"squash above selected".
As part of making lazygit more discoverable, there are certain keys which you almost certainly
need to press when you're in a given mode e.g. 'v' to paste commits when cherry-picking. This
commit prominently shows these keybinding suggestions alongside the others in the option view.
I'm using the same colours for these keybindings as is associated with the mode elsewhere e.g.
yellow for rebasing and cyan for cherry-picking. The cherry-picking one is a bit weird because
we also use cyan text to show loaders and app status at the bottom left so it may be confusing,
but I haven't personally found it awkward from having tested it out myself.
Previously we would render these options whenever a new context was activated, but now that we
need to re-render options whenever a mode changes, I'm instead rendering them on each screen
re-render (i.e. in the layout function). Given how cheap it is to render this text, I think
it's fine performance-wise.
This adds a bunch of tooltips to keybindings and updates some keybinding descriptions (i.e. labels).
It's in preparation for displaying more keybindings on-screen (in the bottom right of the screen),
and so due in part to laziness it shortens some descriptions so that we don't need to manage both
a short and long description (for on-screen vs in-menu). Nonetheless I've added a ShortDescription
field for when we do want to have both a short and long description.
You'll notice that some keybindings I deemed unworthy of the options view have longer descriptions,
because I could get away with it.
This is useful if you want to move a range of commits, so you select them, and
then realize it's better to do it in an interactive rebase. Pressing 'i'
preserves the range now.
This helps work around bugs in editors that may get confused about relative
paths (like nvim-remote, see https://github.com/neovim/neovim/issues/18519), and
shouldn't have any negative effect on others.
As part of this, you must now press enter on a merge conflict file
to focus the merge view; you can no longer press space and if you do
it will raise an error.
I prefer this because I almost never use sticky range selections. Also, this
fixes the issue that just clicking a line in a diff (without dragging) already
creates a range selection. It still does, technically, but it's no longer a
problem because a non-sticky one-line range selection behaves the same as a
non-range selection.
Something dumb that we're currently doing is expecting list items
to define an ID method which returns a string. We use that when copying
items to clipboard with ctrl+o and when getting a ref name for diffing.
This commit gets us a little deeper into that hole by explicitly requiring
list items to implement that method so that we can easily use the new
helper functions in list_controller_trait.go.
In future we need to just remove the whole ID thing entirely but I'm too
lazy to do that right now.
This wasn't necessary before, because the only available branch sorting option
was by recency, so the sort order couldn't change except by checking out
branches. Now, you can sort by committer date, so the branch order can change by
fetching; in this case it's important to keep the same branch selected. One
important use case is to rebase the checked-out branch onto master; you select
master, press "f" to fetch it (this can now change its position in the list),
and then press "r" to rebase. To make this work smoothly it's important to keep
master selected after pressing "f".
We don't need it there so no need to enable it.
I'm leaving the disabled reason checks there, even though they're now redundant,
because they're only one-liners and they communicate intent.
We want to show an error when the user tries to invoke an action that expects only
a single item to be selected.
We're using the GetDisabledReason field to enforce this (as well as DisabledReason
on menu items).
I've created a ListControllerTrait to store some shared convenience functions for this.
This requires us to change the 'v' keybinding for paste to something else,
now that 'v' is used globally for toggling range select. So I'm using
'shift+v' and I'm likewise changing 'c' to 'shift+c' for copying, so
that they're consistent.
We will need to clearly communicate this change in keybindings.
The only time we should call SetSelectedLineIdx is when we are happy for a
select range to be retained which means things like moving the selected line
index to top top/bottom or up/down a page as the user navigates.
But in every other case we should now call SetSelection because that will
set the selected index and cancel the range which is almost always what we
want.
This is the highest priority of the escape actions because it's the thing you're
most likely to want to do upon hitting escape if you have a range selected.
Applying this to the staging/patch-building views is tricky: if we want this logic
for when a range of lines is selected, we'll also need to apply it when a hunk
is selected too. I still think it's worth it though: I've often accidentally
escaped from the staging view when trying to cancel a range selection.
We're not fully standardising here: different contexts can store their range state however
they like. What we are standardising on is that now the view is always responsible for
highlighting the selected lines, meaning the context/controller needs to tell the view
where the range start is.
Two convenient benefits from this change:
1) we no longer need bespoke code in integration tests for asserting on selected lines because
we can just ask the view
2) line selection in staging/patch-building/merge-conflicts views now look the same as in
list views i.e. the highlight applies to the whole line (including trailing space)
I also noticed a bug with merge conflicts not rendering the selection on focus though I suspect
it wasn't a bug with any real consequences when the view wasn't displaying the selection.
I'm going to scrap the selectedRangeBgColor config and just let it use the single line
background color. Hopefully nobody cares, but there's really no need for an extra config.
This adds range select ability in two ways:
1) Sticky: like what we already have with the staging view i.e. press v then use arrow keys
2) Non-sticky: where you just use shift+up/down to expand the range
The state machine works like this:
(no range, press 'v') -> sticky range
(no range, press arrow) -> no range
(no range, press shift+arrow) -> nonsticky range
(sticky range, press 'v') -> no range
(sticky range, press arrow) -> sticky range
(sticky range, press shift+arrow) -> nonsticky range
(nonsticky range, press 'v') -> no range
(nonsticky range, press arrow) -> no range
(nonsticky range, press shift+arrow) -> nonsticky range
Previously we included all navigation keybindings from all views in the keybindings menu, meaning
if you pressed enter on 'next page' in the commits view, you'd end up triggering the action
in the sub-commits view.
Because we obtain disabled reasons after every action, we need to keep the code for doing so
super fast. As such, we should not be hitting the filesystem to get rebase state, instead
we should just get the cached state.
I feel like we should actually be using the cached state everywhere like we do with all
our other models if only for the sake of consistency.
A common issue I have is that I want to move a commit from the top of my branch
all the way down to the first commit on the branch. To do that, I need to navigate
down to the first commit on my branch, press 'e' to start an interactive rebase,
then navigate back up to the top of the branch, then move my commit back down to
the base. This is annoying.
Similarly annoying is moving the commit one-by-one without explicitly starting
an interactive rebase, because then each individual step is its own rebase which
takes a while in aggregate.
This PR allows you to press 'i' from the commits view to start an interactive
rebase from an 'appropriate' base. By appropriate, we mean that we want to start
from the HEAD and stop when we reach the first merge commit or commit on the main
branch. This may end up including more commits than you need, but it doesn't make
a difference.
The algorithm works by blaming the deleted lines, so if a hunk contains only
added lines, we can only hope that it also belongs in the same commit. Warn the
user about this.
Note: the warning might be overly agressive, we'll have to see if this is
annoying. The reason is that it depends on the diff context size whether added
lines go into their own hunk or are grouped together with other added or deleted
lines into one hunk. However, our algorithm uses a diff context size of 0,
because that makes it easiest to parse the diff; this results in hunks having
only added lines more often than what the user sees. For example, moving a line
of code down by two lines will likely result in a single hunk for the user, but
in two hunks for our algorithm. On the other hand, being this strict makes the
warning consistent. We could consider using the user's diff context size in the
algorithm, but then it would depend on the current context size whether the
warning appears, which could be confusing. Plus, it would make the algorithm
quite a bit more complicated.
There are two possible fixes for this bug, and they differ in behavior when
rewording a commit. The one I chose here always splits at the first line feed,
which means that for an improperly formatted commit message such as this one:
This is a very long multi-line subject,
which you shouldn't really use in git.
And this is the body (we call it "description" in lazygit).
we split after the first line instead of after the first paragraph. This is
arguably not what the original author meant, but splitting after the first
paragraph doesn't really work well in lazygit, because we would try to put both
lines into the one-line subject field of the message panel, and you'd only see
the second and not even know that there are more.
The other potential fix would have been to join subject and description with two
line feeds instead of one in JoinCommitMessageAndDescription; this would have
fixed our bug in the same way, but would result in splitting the above message
after the second line instead of the first. I think that's worse, so I decided
for the first fix.
While we're at it, simplify the code a little bit; strings.Cut is documented to
return (s, "") when the separator is not found, so there's no need to do this on
our side.
We do have to trim spaces on the description now, to support the regular reword
case where subject and body are separated by a blank line.
Without this it's not reliably possible to ask whether a given view is visible
by asking
windowHelper.TopViewInWindow(context.GetWindowName()) == context.GetView()
because there could be transient, invisible contexts after it in the Z order.
I guess it's a bit of a coincidence that this has never been a problem so far.
The output of the GetWindowDimensions function is hard to understand just by looking at it,
so I've added a helper function in the tests to render the window layout as text, so that
in order to create a new test you just come up with some args and paste the output as the
expected output.
This has the same downsides that any snapshot-based testing has: it's more brittle than
targeted assertions. But it is much easier to make sense of these snapshots than it is
to make sense of more fine-grained assertions, and I like the fact that these tests can
serve as documentation.
We are also removing the single-character padding on the left/right edges of the bottom
line because it's unnecessary
Unfortunately we need to create views for each spacer: it's not enough to just
layout the existing views with padding inbetween because gocui only renders
views meaning if there is no view in a given position, that position will just
render whatever was there previously (at least that's what I recall from talking
this through with Stefan: I could be way off).
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
refreshWorktrees re-renders the branches view, because the branches view shows
worktrees against branches. This means that when both BRANCHES and WORKTREES are
requested to be refreshed, the branches view would be rendered twice in short
succession. This causes an ugly visual glitch when force-pushing a branch,
because when pushing is done, we would see the ↑4↓9 status come back from under
the Pushing status for a brief moment, to be replaced with a green checkmark a
moment later.
Fix this by including the worktree refresh in the branches refresh when both are
requested. This means that the two are no longer running in parallel for an
async refresh, but hopefully that's not so bad.
When pulling/pushing/fast-forwarding a branch, show this state in the branches
list for that branch for as long as the operation takes, to make it easier to
see when it's done (without having to stare at the status bar in the lower
left).
This will hopefully help with making these operations feel more predictable, now
that we no longer show a loader panel for them.
Very similar to WithWaitingStatus, except that the status is shown in a view
next to the affected item, rather than in the status bar.
Not used by anything yet; again, committing separately to get smaller commits.
This is not a complete fix, but it's good enough to fix the spurious test
failures of submodule/reset.go. We have some vague hope to fix this in a more
sustainable way by somehow improving our concurrency model fundamentally, but
that's a more long-term undertaking, and it's annoying that this test fails so
often, so let's fix it in this way for now.
A new gui config flag 'portraitMode':<string> is added to influence when
LazyGit stacks its UI components on top of one another.
The accepted values are 'auto', 'always', 'never'.
'auto': enter portrait mode when terminal becomes narrow enough
'always': always use portrait mode unconditional of the terminal
dimensions
'never': never use portraid mode
Signed-off-by: Louis DeLosSantos <louis.delos@gmail.com>
Previously there was no way to render a view's search status without also moving the cursor
to the current search match. This caused issues where we wanted to display the status
after leaving the view and coming back, or when beginning a new search from within the
view.
This commit separates the two use cases so we only move the cursor when we're actually
selecting the next search match
Now that we no longer show it in a loader panel, but in the app status view,
it's awkwardly long (the loading animation is much further to the right than for
other waiting status texts). Hopefully seeing just "Fast-forwarding <branch>" is
enough to be able to tell what's happening.
We do this for two reasons:
- when popping up a credentials prompt, it looks distracting if the waiting
status keeps spinning while the user is typing the password
- the task that updates the waiting status periodically would keep the program
busy, so integration tests would wait forever for the program to become idle
again
This can be useful when you know that a cherry-picked commit would conflict at
the tip of your branch, but doesn't at the beginning of the branch (or
somewhere in the middle). In that case you want to be able to edit the commit
before where you want to insert the cherry-picked commits, and then paste to
insert them into the todo list at that point.
This is useful to disable items that are not applicable right now because of
some condition (e.g. the "delete branch" menu item when the currently
checked-out branch is selected).
When a DisabledReason is set on a menu item, we
- show it in a tooltip (below the regular tooltip of the item, if it has one)
- strike through the item's key, if it has one
- show an error message with the DisabledReason if the user tries to invoke the
command
Add co-author to commits
Add addCoAuthor command for commits
- Implement the `addCoAuthor` command to add co-authors to commits.
- Utilize suggestions helpers to populate author names from the suggestions list.
- Added command to gui at `LocalCommitsController`.
This commit introduces the `addCoAuthor` command, which allows users to easily add co-authors to their commits. The co-author names are populated from the suggestions list, minimizing the chances of user input errors. The co-authors are added using the Co-authored-by metadata format recognized by GitHub and GitLab.
This should already have been done when adding the "View divergence from
upstream" command, but now we're going to add yet another item to the menu that
is unrelated to setting or unsetting the upstream.
This fixes two minor problems with the prompts:
1. When pressing shift-A in the local commits view, it would first prompt
whether to stage all files, and then it would prompt whether to amend the
commit at all. This doesn't make sense, it needs to be the other way round.
2. When pressing shift-A on the head commit in an interactive rebase, we would
ask whether they want to amend the last commit, like when pressing shift-A in
the files view. While this is technically correct, the fact that we're
amending the head commit in this case is just an implementation detail, and
from the user's point of view it's better to use the same prompt as we do for
any other commit.
To fix these, we remove the confirmation panel from AmendHelper.AmendHead() and
instead add it at the two call sites, so that we have more control over this.
This encapsulates the logic to make sure we have something to commit; which is
to
- auto-stage all files if no files are staged and the SkipNoStagedFilesWarning
config is on
- otherwise, prompt the user whether they want to stage all files
- error out if we don't have any files at all
Of these, the first one was only done when committing with the built-in commit
message panel; there's no reason why it shouldn't also be done when committing
with the editor, or when amending, and now it is.
It implemented this because it wants to do custom truncation of the ref name;
however, we can achieve the same thing by passing the truncated ref name to our
DynamicTitleBuilder, which was previously unused.
When editing a commit, the index of the current commit can change; for example,
when merge commits are involved, or when working with stacked branches where
"update-ref" commands may be added above the selected commit.
Reselect the current commit after pressing "e"; this requires doing the refresh
blocking on the main thread. (Another option that I considered was to use a
SYNC refresh, and then select the new line with an OnUIThread inside the Then
function. This also works, but results in a very visible lag.)
This is useful for when you begin to type the message in lazygit's commit panel,
and then realize that you'd rather use your editor's more powerful editing
capabilities. Pressing <c-o> will take you right there.
It determines the yellow/red status by getting the merge-base between the
current branch and its upstream; while we're rebasing, the current branch is
HEAD, so it tried to get the merge-base between HEAD and HEAD{u}, which doesn't
work. Fix this by passing the name of the checked-out branch separately.
This also fixes a bug where after the rebase each commit in the commits view had a tick against it because we hadn't
refreshed the view since the base commit was no longer marked
This was on oversight on my part: I assumed that the --work-tree arg was
always intended for use with linked worktrees which have a .git file
pointing back to the repo.
I'm honestly confused now: seems like there are three kinds of worktrees:
* the main worktree of a non-bare repo
* a linked worktree (with its own gitdir in the repo's worktrees/ dir)
* a random folder which you specify as a worktree with the --work-tree arg
I'm pretty sure the --work-tree arg is only intended to be used with this
third kind or workree
The proper fix is to actually have these two functions share code,
or for views to be able to manage their own heights based on their contents.
But I want to get this out for the sake of a Lazygit Anniversary release.
Now that we refresh upon focus, we can scrap this file watching code.
Stefan says few git UIs use file watching, and I understand why: the
reason this code was problematic in the first place is that watching
files is expensive and if you have too many open file handles that
can cause problems.
Importantly: this code that's being removed was _already_ dead.
I've been thinking about this for a while: I think it looks really cool if nuking your working tree
actually results in a nuke animation.
So I've added an opt-out config for it
This allows to do the equivalent of "git rebase --onto <target> <base>", by
first marking the <base> commit with the new command, and then selecting the
target branch and invoking the usual rebase command there.
We are in the outsideFilterModeBindings section here; all of these handlers are
wrapped in a OutsideFilterMode guard in a loop below. No need to add one
manually here.
It's tricky to get this right for reflog commits wrt what's the current branch
for each one; so just disable it entirely here, it's probably not something
anybody needs here.
We want to mark all local branch heads with a "*" in the local commits panel, to
make it easier to see how branches are stacked onto each other. In order to not
confuse users with "*" markers that they don't understand, do this only for the
case where users actually use stacked branches; those users are likely not going
to be confused by the display. This means we want to filter out a few branch
heads that shouldn't get the marker: the current branch, any main branch, and
any old branch that has been merged to master already.
We've been sometimes using lo and sometimes using my slices package, and we need to pick one
for consistency. Lo is more extensive and better maintained so we're going with that.
My slices package was a superset of go's own slices package so in some places I've just used
the official one (the methods were just wrappers anyway).
I've also moved the remaining methods into the utils package.
In the presentation layer, when showing branches, we'll show worktrees against branches if they're
associated. But there was a race condition: if the worktree model was refreshed after the branches model,
it wouldn't be used in the presentation layer when it came time to render the branches.
A better solution would be to have some way of signalling that a particular context needs to be refreshed
and after all the models are done being refreshed, we then refresh the contexts. This will prevent
double-renders
There are quite a few paths you might want to get e.g. the repo's path, the worktree's path,
the repo's git dir path, the worktree's git dir path. I want these all obtained once and
then used when needed rather than having to have IO whenever we need them. This is not so
much about reducing time spent on IO as it is about not having to care about errors every time
we want a path.
We now always re-use the state of the repo if we're returning to it, and we always reset the windows to their default tabs.
We reset to default tabs because it's easy to implement. If people want to:
* have tab states be retained when switching
* have tab states specific to the current repo retained when switching back
Then we'll need to revisit this
Older versions of git don't support the -z flag in `git worktree list`.
So we're using newlines.
Also, we're not raising an error upon error because that triggers another refresh,
which gets us into an infinite loop
For marking as good or bad, the current commit is pretty much always the one you
want to mark, not the selected. It's different for skipping; sometimes you know
already that a certain commit doesn't compile, for example, so you might
navigate there and mark it as skipped. So in the case that the current commit is
not the selected one, we now offer two separate menu entries for skipping, one
for the current commit and one for the selected.
This can be useful if you want to find the commit that fixed a bug (you'd use
"broken/fixed" instead of "good/bad" in this case), or if you want to find the
commit that brought a big performance improvement (use "slow/fast"). It's pretty
mind-bending to have to use "good/bad" in these cases, and swap their meanings
in your head.
Thankfully, lazygit already had support for using custom terms during the bisect
(for the case that a bisect was started on the command-line, I suppose), so all
that's needed is adding a way to specify them in lazygit.
Previously our synchronous refreshes took far longer because nothing
was happening concurrently. We now run refresh functions concurrently
and use a wait group to ensure they're all done before returning
Previously we used a single-line prompt for a tag annotation. Now we're using the commit message
prompt.
I've had to update other uses of that prompt to allow the summary and description labels to
be passed in
Previously, we would only show the authors based on local commits, but sometimes you want to set a commit author
to that of a commit on another branch. Now, so long as you've viewed the branch's commits, the author will appear
as a suggestion.
Previously we applied a right-align on the first column of _all_ menus, even though we really
only intended for it to be on the first column of the keybindings menu (that you get from pressing
'?')
We have a use-case to rebind 'm' to the merge action in the branches panel. There's three ways to handle this:
1) For all global keybindings, define a per-panel key that invokes it
2) Give a name to all controller actions and allow them to be invoked in custom commands
3) Allow checking for merge conflicts after running a custom command so that users can add their own 'git merge' custom command
that matches the in-built action
Option 1 is hairy, Option 2 though good for users introduces new backwards compatibility issues that I don't want to do
right now, and option 3 is trivially easy to implement so that's what I'm doing.
I've put this under an 'after' key so that we can add more things later. I'm imagining other things like being able to
move the cursor to a newly added item etc.
I considered always running this hook by default but I'd rather not: it's matching on the output text and I'd rather something
like that be explicitly opted-into to avoid cases where we erroneously believe that there are conflicts.
Save has been deprecated for a while, push is the recommended way to save a
stash. Push has been available since 2.13, so we can use it without problems.
The global counter approach is easy to understand but it's brittle and depends on implicit behaviour that is not very discoverable.
With a global counter, if any goroutine accidentally decrements the counter twice, we'll think lazygit is idle when it's actually busy.
Likewise if a goroutine accidentally increments the counter twice we'll think lazygit is busy when it's actually idle.
With the new approach we have a map of tasks where each task can either be busy or not. We create a new task and add it to the map
when we spawn a worker goroutine (among other things) and we remove it once the task is done.
The task can also be paused and continued for situations where we switch back and forth between running a program and asking for user
input.
In order for this to work with `git push` (and other commands that require credentials) we need to obtain the task from gocui when
we create the worker goroutine, and then pass it along to the commands package to pause/continue the task as required. This is
MUCH more discoverable than the old approach which just decremented and incremented the global counter from within the commands package,
but it's at the cost of expanding some function signatures (arguably a good thing).
Likewise, whenever you want to call WithWaitingStatus or WithLoaderPanel the callback will now have access to the task for pausing/
continuing. We only need to actually make use of this functionality in a couple of places so it's a high price to pay, but I don't
know if I want to introduce a WithWaitingStatusTask and WithLoaderPanelTask function (open to suggestions).
We had a race condition due to refreshing branches in two different places, one which refreshed reflog commits
beforehand. The race condition meant that upon load we wouldn't see recency values (provided by the reflog commits)
against the branches
Turns out we're just running our refresh functions one after the other which isn't ideal but we can fix that separately.
As it stands this wait group isn't doing anything.
I don't know if this is a hack or not: we run a git command and increment the pending action
count to 1 but at some point the command requests a username or password, so we need to prompt
the user to enter that. At that point we don't want to say that there is a pending action,
so we decrement the action count before prompting the user and then re-increment it again afterward.
Given that we panic when the counter goes below zero, it's important that it's not zero
when we run the git command (should be impossible anyway).
I toyed with a different approach using channels and a long-running goroutine that
handles all commands that request credentials but it feels over-engineered compared to this
commit's approach.
The remote branches controller was using its own escape method meaning it didn't go through the flow of cancelling
an active filter. It's now using the same approach as the sub-commits and commit-files contexts: defining a parent
context to return to upon hittin escape.
Given that we now persist search/filter states even after a side context loses focus, we need to make it really
clear to the user that the context is currently being searched/filtered
This is a pickle: initially I wanted it so that a filter would cancel automatically if the current context lost focus.
But there are situations where you want to retain the focus, e.g. when a popup appears, or when you view the commits
of a branch. The issue is that when you view the commits of a branch, the branches context is removed from the context
stack. Even if this were not the case, you could imagine going branches -> sub-commits -> files -> sub-commits, where
in that case branches would definitely be off the stack upon navigating to the files context.
So because I'm too lazy to find a proper solution to this problem, I'm just making it so that filters in side contexts
are retained unless explicitly cancelled.
There's another edge case this commit handles which is that if I'm in the sub-commits context via the branches context
and start a search, then navigate to the reflog context and hit enter to get to the sub-commits context again, I need
to cancel the search before I switch. Likewise with the commit files context.
For consistency with the previous commit.
Note that this menu entry is used both for unstaged and for staged changes, and
for staged changes it is not quite accurate, as we are not discarding changes in
that case (just unstaging them). Not sure it's worth fixing this; it's still
better than "Delete", anyway.
The title was saying "Unstage lines", which was just wrong. The text said
"Delete lines", which can be seen as a bit misleading; we are only discarding
the changes to the selected lines, not deleting the lines themselves.
For consistency, rename the config variable skipUnstageLineWarning accordingly.
When stopping in a rebase because of a conflict, it is nice to see the commit
that git is trying to apply. Create a fake todo entry labelled "conflict" for
this, and show the "<-- YOU ARE HERE ---" string for that one (in red) instead
of for the real current head.
We use CommitFilesController also for the files of commits that we show
elsewhere, e.g. for branch commits, tags, or stashes. It doesn't make sense to
discard changes from those (for stashes it might be possible to implement it
somehow, but that would be a new feature), so we disallow it unless we are in
the local commits panel.
Discarding changes to an entire directory doesn't quite work correctly in all
cases; for example, if the current commit added files to the directory (but the
directory existed before) then those files won't be removed.
It might be possible to fix the command so that these cases always work for
directories, but I don't think it's worth the effort (you can always use a
custom patch for that), so let's display an error for now.
We have not been good at consistent casing so far. Now we use 'Sentence case' everywhere. EVERYWHERE.
Also Removing 'Lc' prefix from i18n field names: the 'Lc' stood for lowercase but now that everything
is in 'Sentence case' there's no need for the distinction.
I've got a couple lower case things I've kept: namely, things that show up in parentheses.
By constructing an arg vector manually, we no longer need to quote arguments
Mandate that args must be passed when building a command
Now you need to provide an args array when building a command.
There are a handful of places where we need to deal with a string,
such as with user-defined custom commands, and for those we now require
that at the callsite they use str.ToArgv to do that. I don't want
to provide a method out of the box for it because I want to discourage its
use.
For some reason we were invoking a command through a shell when amending a
commit, and I don't believe we needed to do that as there was nothing user-
supplied about the command. So I've switched to using a regular command out-
side the shell there
If a given menu item has an associated keybinding of 'enter', hitting enter won't actually execute
that item unless your cursor is on it. This creates confusion, and so we're going to use a strikethrough
style to communicate that the keybinding is reserved for something else.
The option doesn't have any affect in these views, so we don't need to toggle it
here. But the problem was the HandleFocus call at the end: this would activate
the wrong view, so we need to avoid it here.
Show an error if the user tries to turn the option on, to let them know that it
doesn't work here.
It's not possible to reliably stage things into a custom patch when "ignore
whitespace" is on, so always treat it as off here (like we do in the staging
panel).
It looks like this is a regression that was introduced in 8edad826ca.
Our refresh code may try to push a context. It does this in two places:
1) when all merge conflicts are resolved, we push a 'continue merge?' confirmation context
2) when all conflicts of a given file are resolved and we're in the merge conflicts context,
we push the files context.
Sometimes we push the confirmation context and then push the files context over it, so the user
never sees the confirmation context.
This commit fixes the race condition by adding a check to ensure that we're still in the
merge conflicts panel before we try escaping from it
I don't see a reason why this restriction to have the selection be always
visible was necessary. Removing it has two benefits:
1. Scrolling a list view doesn't change the selection. A common scenario: you
look at one of the commits of your current branch; you want to see the how
many'th commit this is, but the beginning of the branch is scrolled off the
bottom of the commits panel. You scroll down to find the beginning of your
branch, but this changes the selection and shows a different commit now - not
what you want.
2. It is possible to scroll a panel that is not the current one without changing
the focus to it. That's how windows in other GUIs usually behave.
We now refresh the staging panel when doing an unscoped refresh, so that if we commit from the staging panel we escape
back to the files panel if need be. But that causes flickering when doing an unscoped refresh from other contexts,
because the refreshStagingPanel function assumes that the staging panel has focus. So we're adding a guard at the top
of that function to early exit if we don't have focus.
When cycling history, we want to make it so that upon returning to the original prompt, you get your text back.
Importantly, we don't want to use the existing preservedMessage field for that because that's only for preserving
a NEW commit message, and we don't want the history stuff of the commit reword flow to overwrite that.
When we use the one panel for the entire commit message, its tricky to have a keybinding both for adding a newline and submitting.
By having two panels: one for the summary line and one for the description, we allow for 'enter' to submit the message when done from the summary panel,
and 'enter' to add a newline when done from the description panel. Alt-enter, for those who can use that key combo, also works for submitting the message
from the description panel. For those who can't use that key combo, and don't want to remap the keybinding, they can hit tab to go back to the summary panel
and then 'enter' to submit the message.
We have some awkwardness in that both contexts (i.e. panels) need to appear and disappear in tandem and we don't have a great way of handling that concept,
so we just push both contexts one after the other, and likewise remove both contexts when we escape.
This begins a big refactor of moving more code out of the Gui struct into contexts, controllers, and helpers. We also move some code into structs in the
gui package purely for the sake of better encapsulation
When cycling history, we want to make it so that upon returning to the original prompt, you get your text back.
Importantly, we don't want to use the existing preservedMessage field for that because that's only for preserving
a NEW commit message, and we don't want the history stuff of the commit reword flow to overwrite that.
When we use the one panel for the entire commit message, its tricky to have a keybinding both for adding a newline and submitting.
By having two panels: one for the summary line and one for the description, we allow for 'enter' to submit the message when done from the summary panel,
and 'enter' to add a newline when done from the description panel. Alt-enter, for those who can use that key combo, also works for submitting the message
from the description panel. For those who can't use that key combo, and don't want to remap the keybinding, they can hit tab to go back to the summary panel
and then 'enter' to submit the message.
We have some awkwardness in that both contexts (i.e. panels) need to appear and disappear in tandem and we don't have a great way of handling that concept,
so we just push both contexts one after the other, and likewise remove both contexts when we escape.
This fixes two problems with the "amend commit with staged changes" command:
1. Amending to a fixup commit didn't work (this would create a commmit with the
title "fixup! fixup! original title" and keep that at the top of the branch)
2. Unrelated fixup commits would be squashed too.
The added integration test verifies that both of these problems are fixed.
We already show "merge" todo entries when starting an interactive rebase with
--rebase-merges outside of lazygit. Changing the type of a merge entry to "pick"
or "edit" doesn't make sense and shouldn't be allowed. Earlier in this branch we
have started to show "update-ref" entries, these can't be changed either (they
can be moved, though).
You might argue that it should be possible to change them to "drop", but in the
case of "update-ref" this doesn't make sense either, because "drop" needs a Sha
and we don't have one here. Also, you would then be able to later change it back
to "pick", so we would have to remember that this isn't allowed for this
particular drop entry; that's messy, so just disallow all editing.
It used to work on the assumption that rebasing commits in lazygit's model
correspond one-to-one to lines in the git-rebase-todo file, which isn't
necessarily true (e.g. when users use "git rebase --edit-todo" at the custom
command prompt and add a "break" between lines).
The main reason for doing this (besides the reasons given for Status in the
previous commit) is that it allows us to easily convert from TodoCommand to
Action and back. This will be needed later in the branch. Fortunately,
TodoCommand is one-based, so this allows us to add an ActionNone constant with
the value 0.
The "open" command is supposed to behave in the same way as double-clicking a
file in the Finder/Explorer. The concept of jumping to a specific line in the
file doesn't make sense for this; use "edit" instead.
Previously we would have tried to do the rebase, resulting in a long and
somewhat cryptic error message from git; now we check ourselves and show a less
intimidating message.
We are going to add one more flag in the next commit.
Note that we are not using the struct inside patch_manager.go; we keep passing
the individual flags there. The reason for this will become more obvious later
in this branch.
It's not so much the total number of commits that matters here, it's just
whether we are on the first one. (This includes the other condition.)
This allows us to get rid of the condition in rebase.go.
Instead of rebasing from the commit below the current one and then setting the
current one to "edit", we rebase from the current one and insert a "break" after
it. In most cases the behavior is exactly the same as before, except that the
new method also works if the current commit is a merge commit. This is useful if
you want to create a new commit at the very beginning of your branch (by editing
the last commit before your branch).
We already have this very convenient behavior of jumping to the next stageable
line after staging something. However, while this worked well for staging
single lines or hunks, it didn't work correctly when staging a range of lines;
in this case we want to start searching from the first line of the range.
