I can only guess here: maybe they were added to more clearly document the public
interface of the classes? If so, I don't think that works. Developers who are
not familiar with the convention will just add a new public method to the class
without updating the interface.
Apparently this was an attempt at working around go's lack of default arguments,
but it's very unidiomatic and a bit confusing. Make it a normal parameter
instead, so all clients have to pass it explicitly.
Add verify flag
Add and update integration tests
Rename verify to forceSkipHooks
Adapt CommitSkipHooks integration test to actually use a hook
Remove forceSkipHooks param from OnConfirm et al
Simplify tests
Before we changed the commitPrefix config to a list in #4261, we had this bug
where the defaults section in Config.md would erroneously list the default for
commitPrefix as
git:
commitPrefix:
pattern: ""
replace: ""
This was not correct, commitPrefix was a pointer, and the default for that was
nil, which is not the same.
Now, some people copied and pasted the entire defaults section into their config
files, setting the commitPrefix to an empty pattern (which is not the same as
not setting it at all). And this caused the branch name to be filled in to the
subject field for every commit; see for example
https://github.com/jesseduffield/lazygit/discussions/3632.
New users copying the defaults section into their config file in the current
version no longer have this problem because now that commitPrefix is a list, it
is no longer included in the defaults section. However, the migration that we
added in #4261 would happily carry over those empty strings into a list entry,
so people migrating from an older version still have the broken config in their
config files.
To work around the issue, ignore commit prefix settings whose pattern is an
empty string. I can't imagine a valid reason why people would actually want to
set the pattern to an empty string, so I assume this only comes from the broken
defaults problem described above.
In ff4ae4a544 we changed the order of the calls to render before selecting the
branch. This was done only to save an extra call to ReApplyFilter, which is done
by refreshView; I claimed that the order of refreshView vs. SetSelectedLineIdx
doesn't matter here. I guess I was wrong about that, it makes the integration
test custom_commands/suggestions_preset.go flaky. To fix this, put the
refreshView call back to where it was (after the SetSelectedLineIdx call), and
instead insert an extra call to ReApplyFilter where necessary to fix the bug
that ff4ae4a544 was trying to fix.
Jesse's comment from https://github.com/jesseduffield/lazygit/issues/4237:
We recently added a new option to check out a commit's branch from within the
commits, reflog, and sub-commits panels:
https://github.com/user-attachments/assets/0a5cf3f2-6803-4709-ae5a-e4addc061012
After using it for some time, I find it annoying that the default option has
changed. I rarely find myself wanting to check out a branch from the commits
panel, and it's rarer still to want to check out a branch from the reflog and
sub-commits panel. Although there may be use cases for this, it is jarring that
something you can always do (checkout the commit) is harder to do than something
that you can sometimes do (checkout the branch).
We've also had a user complain (see
https://github.com/jesseduffield/lazygit/pull/4117) about their muscle-memory
being broken by the recent change, and I have also fallen victim to this. I
don't think that the new branch checkout option is sufficiently useful to
dislodge the existing keybinding, so let's swap them.
The code that tries to reselect the same branch again uses GetItems, which in
case of filtering is the filtered list. After replacing the branches slice with
a new one, the filtered list is no longer up to date, so we must reapply the
filter before working with it. It so happens that refreshView does that, so
simply call that before setting the selection again; I don't think the order
matters in this case. Otherwise we'd have to insert another call to
ReApplyFilter before the call to GetItems, which we can avoid this way.
Note that this doesn't actually make anything work better in the case of
deleting a branch, since we can't reselect the deleted branch anyway of course.
But it avoids a possible crash if the branch that was deleted was the last one
in the unfiltered list.
This includes the "only conflicting" status that the user can't switch to
themselves. We display it anyway to give a hint that files are being filtered,
and to let them know that they can turn the filter off if they want to.
We don't need to maintain additional state to allow this; all we need to do is
take over the filter only when the number of conflicting files goes from zero to
non-zero, rather than every time it is non-zero.
The only problem is that we don't allow users to go back to showing only
conflicted files, but that's just because we don't have that as an entry in the
menu. And I don't think it's a problem.
This handles the situation where the user's own config says to not show
untracked files, as is often the case with bare repos managing a user's
dotfiles.
For editable views it is important to actually show the blank line so that we
can put the cursor there for typing.
This fixes problems with adding blank lines at the end of longer commit
messages.
There are two ways to jump to the editor on a specific line: pressing `e` in the
staging or patch building panels, or clicking on a hyperlink in a delta diff. In
both cases, this works perfectly in the unstaged changes view, but in other
views (either staged changes, or an older commit) it can often jump to the wrong
line; this happens when there are further changes to the file being viewed in
later commits or in unstaged changes.
This commit fixes this so that you end up on the right line in these cases.
When the user checks out a commit which has a local branch ref attached
to it, they can select between checking out the branch or checking out
the commit as detached head.
Sometimes we populate the commit message panel with a pre-created commit
message. The two cases where this happens is:
- you type `w` to commit, in which case we put the skipHookPrefix in the subject
- you have a commitPrefix pattern, in which case we match it against the branch
name and populate the subject with the replacement string if it matches
In either case, if you have a preserved commit message, we use that.
Now, when you use either of these and then cancel, we preserve that initial,
unchanged message and reuse it the next time you commit. This has two problems:
it strips spaces, which is a problem for the commitPrefix patterns, which often
end with a space. And also, when you change your config to experiment with
commitPrefix patterns, the change seemingly doesn't take effect, which can be
very confusing.
To fix both of these problems, only preserve the commit message when it is not
identical to the initial message.
So far, lines in the view corresponded 1:1 to lines in the patch. Once we turn
on wrapping for the staging view (which we don't do yet), this is no longer
true, so we need to convert from view lines to patch lines or vice versa all
over the place.
to make it more generally usable by clients other than ConfirmationHelper, which
we will do later in this branch. Rename it to WrapViewLinesToWidth while we're
at it.
Add tests; in particular, add a sanity check that we wrap lines the same way as
gocui does. The tests that are added here are the same ones as in gocui for its
lineWrap function, but we'll extend them a bit in later commits in this branch.
It is needed by both call sites of this function. This has the added benefit
that the argument doesn't unnecessarily show up in the status view when diffing
mode is on.
We allow deleting remote branches (or local and remote branches) only if *all*
selected branches have one.
We show the a warning about force-deleting as soon as at least one of the
selected branches is not fully merged.
The added test only tests a few of the most interesting cases; I didn't try to
cover the whole space of possible combinations, that would have been too much.
Since we want to select multiselections, this will make it easier to pass a
slice of remote branches. It does require that for the case of the local
branches panel we need to synthesize a RemoteBranch object from the selected
local branch, but that's not hard.
Original commit message of the gocui change:
This fixes View.Size, Width and Height to be the correct (outer) size of a view
including its frame, and InnerSize/InnerWidth/InnerHeight to be the usable
client area exluding the frame. Previously, Size was actually the InnerSize (and
a lot of client code used it as such, so these need to be changed to InnerSize).
InnerSize, on the other hand, was *one* less than Size (not two, as you would
have expected), and in many cases this was made up for at call sites by adding 1
(e.g. in calcRealScrollbarStartEnd, parseInput, and many other places in the
lazygit code).
There are still some weird things left that I didn't address here:
- a view's lower-right coordinates (x1/y1) are one less than you would expect.
For example, a view with a 2x2 client area like this:
╭──╮
│ab│
│cd│
╰──╯
in the top-left corner of the screen (x0 and y0 both zero) has x1/xy at 3, not
4 as would be more natural.
- a view without a frame has its coordinates extended by 1 on all sides; to
illustrate, the same 2x2 view as before but without a frame, sitting in the
top-left corder of the screen, has coordinates x0=-1, y0=-1, x1=2, y1=2. This
is highly confusing and unexpected.
I left these as they are because they would be even more of a breaking change,
and also because they don't have quite as much of an impact on general app code.
When creating a PR against a selected branch (via O = "create pull request
options"), the user will first be asked to select a remote (if there is more
than one). After that, the suggestion area is populated with all remote branches
at that origin - instead of all local ones. After all, creating a PR against a
branch that doesn't exist on the remote won't work.
Please note that for the "PR is not filed against 'origin' remote" use case
(e.g. when contributing via a fork that is 'origin' to a GitHub project that is
'upstream'), the opened URL will not be correct. This is not a regression and
will be fixed in an upcoming PR.
Fixes#1826.
After pasting commits once, we hide the cherry-picking status (as if it had been
reset), and no longer paint the copied commits with blue hashes; however, we
still allow pasting them again. This can be useful e.g. to backport a bugfix to
multiple major version release branches.
Currently we try to delete a branch normally, and if git returns an error and
its output contains the text "branch -D", then we prompt the user to force
delete, and try again using -D. Besides just being ugly, this has the
disadvantage that git's logic to decide whether a branch is merged is not very
good; it only considers a branch merged if it is either reachable from the
current head, or from its own upstream. In many cases I want to delete a branch
that has been merged to master, but I don't have master checked out, so the
current branch is really irrelevant, and it should rather (or in addition) check
whether the branch is reachable from one of the main branches. The problem is
that git doesn't know what those are.
But lazygit does, so make the check on our side, prompt the user if necessary,
and always use -D. This is both cleaner, and works better.
See this mailing list discussion for more:
https://lore.kernel.org/git/bf6308ce-3914-4b85-a04b-4a9716bac538@haller-berlin.de/
This might seem controversial; in many cases the client code gets longer,
because it needs an extra line for an explicit `return nil`. I still prefer
this, because it makes it clearer which calls can return errors.
This solves several problems that arise from opening a menu while the prompt is
open. We might try to solve these in a different way, e.g. by dismissing the
search prompt before opening a menu, but restricting what you can do while the
prompt is open seems like the more robust fix.
To achieve this, we
- call resetKeyBindings both when opening and when closing the search/filter
prompt
- change the keybindings to only contain the ones for the search prompt when
that context is active.
We make the name of the GetSelectedRefRangeForDiffFiles very specific on purpose
to make it clear that this is only for switching to diff files, so the
implementations can make assumptions about that (unlike GetSelectedRef, which is
used for different purposes and needs to stay more generic).
Right now it doesn't do very much yet, but it's still worth it even in this
state, I'd say. The function is going to become a bit longer in the next commit,
though.
In other views that show lists of commits (reflog and stash) it doesn't make
sense to show a range diff of selected entries because they don't form a linear
sequence, so we keep the previous behavior of showing the diff for the free end
of the selection range in those view.
The same applies to the commits view if the selection range includes rebasing
todos; these can have an arbitrary order, and a range diff doesn't make sense
for those.
Hopefully this will help alleviate the problem that diffing mode is sticky, and
you often forget that it's still on.
Make it magenta like the mode text in the information view.
This fixes two problems:
- Set the title ref to the commit description (like
SwitchToDiffFilesController.enter does), rather than just the hash
- SetTitleRef only sets the title of the DynamicTitleBuilder, but doesn't set it
on the view; this only happens in ContextMgr.Activate, so you'd have to switch
to a different side panel and then back to see the new title.
The comments that I'm deleting here explain why we need the bool; however, in
our case that's a theoretical issue. It would only arise if we ever were to pass
a nil context to SetParentContext, which we never do.
The current behaviour when creating a new branch off of a remote branch
is to always track the branch it was created from.
For example, if a branch 'my_branch' is created off of the remote branch
'fix_crash_13', then 'my_branch' will be tracking the remote
'fix_crash_13' branch.
It is common practice to have both the local and remote branches named
the same when the local is tracking the remote one. Therefore, it is
reasonable to expect that 'my_branch' should not track the remote
'fix_crash_13' branch.
The new behaviour when creating a new branch off of a remote branch is
to track the branch it was created from only if the branch names match.
If the branch names DO NOT match then the newly created branch will not
track the remote branch it was created from.
For example, if a user creates a new branch 'fix_crash_13' off of the
remote branch 'fix_crash_13', then the local 'fix_crash_13' branch will
track the remote 'fix_crash_13' branch.
However, if the user creates a new branch called 'other_branch_name' off
of the remote branch 'fix_crash_13', then the local 'other_branch_name'
branch will NOT track the remote 'fix_crash_13' branch.
The default shortcut to open git difftool (ctrl+t) is not available on
the "Local Branches" window. It is available when selecting a commit
from a local branch, a remote branch, or a tag from the "Local Branches"
window.
This is inconsistent since branches or tags are also commits, the
shortcut should also work on them directly.
This commit remedies this inconsistency by allowing the use of the
shortcut directly on a branch or a tag. The shortcut works both in the
"standard" mode and the "diffing" mode.
Probably not the most import feature in the world, but when resizing the
terminal window while multiple popup panels were open at the same time, we would
only resize the topmost one.
The main reason for changing this is because it makes the next commit easier to
implement.
This is how we do it for confirmation with suggestions too, so be consistent. It
will make things easier later in this branch if we only have one context per
"panel" on the stack, even if the panel consists of two views.
Concretely this means:
- only push the message context onto the stack when opening the panel (this
requires making the description view visible manually; we do the same for
suggestions)
- when switching between message and description, use ReplaceContext rather than
PushContext
We forgot to handle the "suggestions" and "commitDescription" view names.
Instead of listing all the names of views that can appear in popups though,
let's use the context kind for this, which feels more robust.
This is a change in behavior: previously, clicking outside of the search or
filter prompt would close the prompt, now it no longer does (because search has
a persistent popup kind, but it wasn't listed in the list of view names before).
