When you are in the middle of a rebase, and you cherry-pick a commit which
conflicts, it helps to be clear on whether you are prompted to continue the
cherry-pick or the rebase.
It looks like enums.go was supposed to be file that collects a bunch of enums,
but actually there's only one in there, and since it has methods, it deserves to
be in a file of its own, named after the type.
- Remove REBASE_MODE_NORMAL. It is not the "normal" mode anyway, rather a legacy
mode; we have removed support for it in eb0f7e3d02, so there's no point in
representing it in the enum.
- Remove distinction between REBASE_MODE_REBASING and REBASE_MODE_INTERACTIVE;
these are the same now.
- Rename StatusCommands.IsInInteractiveRebase to IsInRebase.
- Remove StatusCommands.RebaseMode; use StatusCommands.IsInRebase instead.
It is shown either when committing with `w`, or when typing the skipHooks prefix
if there is one. This should hopefully make it clearer when the hooks are run
and when they are not.
We removed prefilling the skipHook prefix in b102646b20 with the intention of
making it clearer that using the prefix in normal commits and typing `w` to skip
hooks are now two independent features.
It turns out that some people liked it with prefilling the prefix and perceive
it as a regression, so put it back in.
But only if we don't have a preserved message; this is an important use case,
when you try to make a normal commit, the hook fails, and then you want to make
the same commit with skipping the hook, but with the same message that you
already typed.
This makes it possible to use date and time in initial values like this:
```yaml
initialValue: 'ruudk/{{ runCommand "date +\"%Y/%-m\"" }}/'
```
I want to use this to configure my BranchPrefix like this:
```yaml
git:
branchPrefix: 'ruudk/{{ runCommand "date +\"%Y/%-m\"" }}/'
```
For the less common conflict types DD, AU, UA, DU, and UD, we would previously
only show "* Unmerged path" in the main view, which isn't helpful. Also, for
some of these we would split the main view and show this text both in the
unstaged changes and staged changes views, which is a bit embarrassing.
Improve this by offering more explanation about what's going on, and what the
most likely way to resolve the situation is for each case.
I can only guess here: maybe they were added to more clearly document the public
interface of the classes? If so, I don't think that works. Developers who are
not familiar with the convention will just add a new public method to the class
without updating the interface.
Apparently this was an attempt at working around go's lack of default arguments,
but it's very unidiomatic and a bit confusing. Make it a normal parameter
instead, so all clients have to pass it explicitly.
The current rules for discarding submodule changes is that no other changed item
must be also selected. There are some bugs with the current implementation when
submodules are in folders.
For example, selecting and discarding a folder with only a nested submodule
change will currently do nothing. The submodule changes should be discarded. The
folder only contains submodule changes so it should be no different than
pressing discard on the submodule entry itself.
Also, I noticed range selecting both the folder and the submodule and then
pressing discard would be incorrectly disallowed.
Add verify flag
Add and update integration tests
Rename verify to forceSkipHooks
Adapt CommitSkipHooks integration test to actually use a hook
Remove forceSkipHooks param from OnConfirm et al
Simplify tests
This is useful for copying the entire content of the selected file as it was at
the selected commit.
We only add it to the commit files panel; it is not needed in the files panel,
because there you can simply press "e" to edit the file.
Before we changed the commitPrefix config to a list in #4261, we had this bug
where the defaults section in Config.md would erroneously list the default for
commitPrefix as
git:
commitPrefix:
pattern: ""
replace: ""
This was not correct, commitPrefix was a pointer, and the default for that was
nil, which is not the same.
Now, some people copied and pasted the entire defaults section into their config
files, setting the commitPrefix to an empty pattern (which is not the same as
not setting it at all). And this caused the branch name to be filled in to the
subject field for every commit; see for example
https://github.com/jesseduffield/lazygit/discussions/3632.
New users copying the defaults section into their config file in the current
version no longer have this problem because now that commitPrefix is a list, it
is no longer included in the defaults section. However, the migration that we
added in #4261 would happily carry over those empty strings into a list entry,
so people migrating from an older version still have the broken config in their
config files.
To work around the issue, ignore commit prefix settings whose pattern is an
empty string. I can't imagine a valid reason why people would actually want to
set the pattern to an empty string, so I assume this only comes from the broken
defaults problem described above.
Rewording a commit at the beginning of a long branch can take very long;
without this change, the commit message panel would stay visible with a blinking
cursor during that time, which is very confusing.
This has the slight downside that it will say "Rebasing" in the lower right
corner until the operation is done; but we already have this problem when doing
custom patch operations, or dropping changes from a commit, so it's not new, and
we can think about how to fix all these another time.
WithGpgHandling already does an async refresh when done, so there's no need to
do one here for the case of amending the head commit. On top of that,
WithGpgHandling uses WithWaitingStatus and works in the background, so the
Refresh here would come too early anyway.
All this does is clear the preserved commit message; however, we open the commit
message panel with PreserveMessage: false when rewording, so this is not
necessary.
In ff4ae4a544 we changed the order of the calls to render before selecting the
branch. This was done only to save an extra call to ReApplyFilter, which is done
by refreshView; I claimed that the order of refreshView vs. SetSelectedLineIdx
doesn't matter here. I guess I was wrong about that, it makes the integration
test custom_commands/suggestions_preset.go flaky. To fix this, put the
refreshView call back to where it was (after the SetSelectedLineIdx call), and
instead insert an extra call to ReApplyFilter where necessary to fix the bug
that ff4ae4a544 was trying to fix.
This is very similar to the same menu in the Files panel, except that it works
on whatever diff is currently shown in the main view, including range diffs
either in diffing mode (shift-W), or from a range selection of commits.
When pasting a multi-line commit message into the subject field of the commit
editor, we would interpret the first newline as the confirmation for closing the
editor, and then all remaining characters as whatever command they are bound to,
resulting in executing all sorts of arbitrary commands.
Now we recognize this being a paste, and interpret the first newline as moving
to the description.
Also, prevent tabs in the pasted content from switching to the respective other
panel; simply insert four spaces instead, which should be good enough for the
leading indentation in pasted code snippets, for example.
Jesse's comment from https://github.com/jesseduffield/lazygit/issues/4237:
We recently added a new option to check out a commit's branch from within the
commits, reflog, and sub-commits panels:
https://github.com/user-attachments/assets/0a5cf3f2-6803-4709-ae5a-e4addc061012
After using it for some time, I find it annoying that the default option has
changed. I rarely find myself wanting to check out a branch from the commits
panel, and it's rarer still to want to check out a branch from the reflog and
sub-commits panel. Although there may be use cases for this, it is jarring that
something you can always do (checkout the commit) is harder to do than something
that you can sometimes do (checkout the branch).
We've also had a user complain (see
https://github.com/jesseduffield/lazygit/pull/4117) about their muscle-memory
being broken by the recent change, and I have also fallen victim to this. I
don't think that the new branch checkout option is sufficiently useful to
dislodge the existing keybinding, so let's swap them.
The code that tries to reselect the same branch again uses GetItems, which in
case of filtering is the filtered list. After replacing the branches slice with
a new one, the filtered list is no longer up to date, so we must reapply the
filter before working with it. It so happens that refreshView does that, so
simply call that before setting the selection again; I don't think the order
matters in this case. Otherwise we'd have to insert another call to
ReApplyFilter before the call to GetItems, which we can avoid this way.
Note that this doesn't actually make anything work better in the case of
deleting a branch, since we can't reselect the deleted branch anyway of course.
But it avoids a possible crash if the branch that was deleted was the last one
in the unfiltered list.
This includes the "only conflicting" status that the user can't switch to
themselves. We display it anyway to give a hint that files are being filtered,
and to let them know that they can turn the filter off if they want to.
I renamed the "Reset filter" item to "No filter" to make it look more like a
state than an action, so that it fits the radio button concept better.
When there are conflicts and we set the filter to show only conflicting files,
then none of the radio buttons light up, which is slightly strange. I guess it's
ok though.
We don't need to maintain additional state to allow this; all we need to do is
take over the filter only when the number of conflicting files goes from zero to
non-zero, rather than every time it is non-zero.
The only problem is that we don't allow users to go back to showing only
conflicted files, but that's just because we don't have that as an entry in the
menu. And I don't think it's a problem.
This handles the situation where the user's own config says to not show
untracked files, as is often the case with bare repos managing a user's
dotfiles.
Git diff and patch doesn't work reliably with a context size of 0, so disable it
in this case (and discarding changes as well). Magit does the same, see
https://github.com/magit/magit/issues/4222.
Staging entire files by pressing space in the Files panel is still possible, of
course.
When pushing a branch that didn't have an upstream yet, we use the command line
git push --set-upstream origin HEAD:branch-name
The HEAD: part of this is too unspecific; when checking out a different branch
while the push is still running, then git will set the upstream branch on the
newly checked out branch, not the branch that was being pushed. This might be
considered a bug in git; you might expect that it resolves HEAD at the beginning
of the operation, and uses the result at the end.
But we can easily work around this by explicitly supplying the real branch name
instead of HEAD.
For editable views it is important to actually show the blank line so that we
can put the cursor there for typing.
This fixes problems with adding blank lines at the end of longer commit
messages.
There are two ways to jump to the editor on a specific line: pressing `e` in the
staging or patch building panels, or clicking on a hyperlink in a delta diff. In
both cases, this works perfectly in the unstaged changes view, but in other
views (either staged changes, or an older commit) it can often jump to the wrong
line; this happens when there are further changes to the file being viewed in
later commits or in unstaged changes.
This commit fixes this so that you end up on the right line in these cases.
When the user checks out a commit which has a local branch ref attached
to it, they can select between checking out the branch or checking out
the commit as detached head.
Sometimes we populate the commit message panel with a pre-created commit
message. The two cases where this happens is:
- you type `w` to commit, in which case we put the skipHookPrefix in the subject
- you have a commitPrefix pattern, in which case we match it against the branch
name and populate the subject with the replacement string if it matches
In either case, if you have a preserved commit message, we use that.
Now, when you use either of these and then cancel, we preserve that initial,
unchanged message and reuse it the next time you commit. This has two problems:
it strips spaces, which is a problem for the commitPrefix patterns, which often
end with a space. And also, when you change your config to experiment with
commitPrefix patterns, the change seemingly doesn't take effect, which can be
very confusing.
To fix both of these problems, only preserve the commit message when it is not
identical to the initial message.
So far, lines in the view corresponded 1:1 to lines in the patch. Once we turn
on wrapping for the staging view (which we don't do yet), this is no longer
true, so we need to convert from view lines to patch lines or vice versa all
over the place.
to make it more generally usable by clients other than ConfirmationHelper, which
we will do later in this branch. Rename it to WrapViewLinesToWidth while we're
at it.
Add tests; in particular, add a sanity check that we wrap lines the same way as
gocui does. The tests that are added here are the same ones as in gocui for its
lineWrap function, but we'll extend them a bit in later commits in this branch.
This is also what we do in the staging controller, and it makes it so that when
you exit the patch building view and then enter it again (for another file, or
the same one) we select the first hunk again.
For non-merge commits we change "pick" to "drop" when we delete them. We do this
so that we can use the same code for dropping a commit no matter whether we are
in an interactive rebase or not. (If we aren't, we could just as well delete the
pick line from the todo list instead of setting it to "drop", but if we are, it
is better to keep the line around so that the user can change it back to "pick"
if they change their mind.)
However, merge commits can't be changed to "drop", so we have to delete them
from the todo file. We add a new daemon instruction that does this.
We still don't allow deleting a merge commit from within an interactive rebase.
The reason is that we don't show the "label" and "reset" todos in lazygit, so
deleting a merge commit would leave the commits from the branch that is being
merged in the list as "pick" commits, with no indication that they are going to
be dropped because they are on a different branch, and the merge commit that
would have brought them in is gone. This could be very confusing.
Not much of a change in behavior, because moving merge commits was already not
possible. However, it failed with a cryptic error message ("Todo fa1afe1 not
found in git-rebase-todo"), so disable it properly instead.
It is needed by both call sites of this function. This has the added benefit
that the argument doesn't unnecessarily show up in the status view when diffing
mode is on.
In 67b8ef449c we changed the "edit" command to insert a "break" after the
selected commit, rather than setting the selected todo to "edit". The reason for
doing this was that it now works for merge commits too.
Back then, I claimed "In most cases the behavior is exactly the same as before."
Unfortunately that's not true, there are two reasons why the previous behavior
was better (both are demonstrated by tests earlier in this branch):
- when editing the last commit of a branch in the middle of a stack of branches,
we are now missing the update-ref todo after it, which means that amending the
commit breaks the stack
- it breaks auto-amending (see the added test earlier in this branch for an
explanation)
For these reasons, we are going back to the previous approach of setting the
selected commit to "edit" whenever possible, i.e. unless it's a merge commit.
The only scenario where this could still be a problem is when you have a stack
of branches, and the last commit of one of the branches in the stack is a merge
commit, and you try to edit that. In my experience with stacked branches this is
very unlikely, in almost all cases my stacked branches are linear.
We allow deleting remote branches (or local and remote branches) only if *all*
selected branches have one.
We show the a warning about force-deleting as soon as at least one of the
selected branches is not fully merged.
The added test only tests a few of the most interesting cases; I didn't try to
cover the whole space of possible combinations, that would have been too much.
Since we want to select multiselections, this will make it easier to pass a
slice of remote branches. It does require that for the case of the local
branches panel we need to synthesize a RemoteBranch object from the selected
local branch, but that's not hard.
Original commit message of the gocui change:
This fixes View.Size, Width and Height to be the correct (outer) size of a view
including its frame, and InnerSize/InnerWidth/InnerHeight to be the usable
client area exluding the frame. Previously, Size was actually the InnerSize (and
a lot of client code used it as such, so these need to be changed to InnerSize).
InnerSize, on the other hand, was *one* less than Size (not two, as you would
have expected), and in many cases this was made up for at call sites by adding 1
(e.g. in calcRealScrollbarStartEnd, parseInput, and many other places in the
lazygit code).
There are still some weird things left that I didn't address here:
- a view's lower-right coordinates (x1/y1) are one less than you would expect.
For example, a view with a 2x2 client area like this:
╭──╮
│ab│
│cd│
╰──╯
in the top-left corner of the screen (x0 and y0 both zero) has x1/xy at 3, not
4 as would be more natural.
- a view without a frame has its coordinates extended by 1 on all sides; to
illustrate, the same 2x2 view as before but without a frame, sitting in the
top-left corder of the screen, has coordinates x0=-1, y0=-1, x1=2, y1=2. This
is highly confusing and unexpected.
I left these as they are because they would be even more of a breaking change,
and also because they don't have quite as much of an impact on general app code.
When creating a PR against a selected branch (via O = "create pull request
options"), the user will first be asked to select a remote (if there is more
than one). After that, the suggestion area is populated with all remote branches
at that origin - instead of all local ones. After all, creating a PR against a
branch that doesn't exist on the remote won't work.
Please note that for the "PR is not filed against 'origin' remote" use case
(e.g. when contributing via a fork that is 'origin' to a GitHub project that is
'upstream'), the opened URL will not be correct. This is not a regression and
will be fixed in an upcoming PR.
Fixes#1826.
As far as I understand, this was needed back when the staging context was still
responsible for rendering its highlight (as opposed to the gocui view, as it is
today). It was necessary to call it with isFocused=false so that it removed the
highlight. The isFocused bool is no longer used today (and we'll remove it in
the next commit), so there's no need to render the view here any more.
This fixes flickering when leaving the staging view by pressing escape. The
reason is that in this case the patch state was already set to nil by the time
we get here, so we would render an empty view for a brief moment.
On top of that, it fixes unwanted scrolling to the top when leaving the staging
view. The reason for this is that we have code in layout that scrolls views up
if needed, e.g. because the window got taller or the view content got shorter
(added in #3839). This kicked in because we emptied the view, and scrolled it
all the way to the top, which we don't want.
After pasting commits once, we hide the cherry-picking status (as if it had been
reset), and no longer paint the copied commits with blue hashes; however, we
still allow pasting them again. This can be useful e.g. to backport a bugfix to
multiple major version release branches.
Currently we try to delete a branch normally, and if git returns an error and
its output contains the text "branch -D", then we prompt the user to force
delete, and try again using -D. Besides just being ugly, this has the
disadvantage that git's logic to decide whether a branch is merged is not very
good; it only considers a branch merged if it is either reachable from the
current head, or from its own upstream. In many cases I want to delete a branch
that has been merged to master, but I don't have master checked out, so the
current branch is really irrelevant, and it should rather (or in addition) check
whether the branch is reachable from one of the main branches. The problem is
that git doesn't know what those are.
But lazygit does, so make the check on our side, prompt the user if necessary,
and always use -D. This is both cleaner, and works better.
See this mailing list discussion for more:
https://lore.kernel.org/git/bf6308ce-3914-4b85-a04b-4a9716bac538@haller-berlin.de/
This might seem controversial; in many cases the client code gets longer,
because it needs an extra line for an explicit `return nil`. I still prefer
this, because it makes it clearer which calls can return errors.
This solves several problems that arise from opening a menu while the prompt is
open. We might try to solve these in a different way, e.g. by dismissing the
search prompt before opening a menu, but restricting what you can do while the
prompt is open seems like the more robust fix.
To achieve this, we
- call resetKeyBindings both when opening and when closing the search/filter
prompt
- change the keybindings to only contain the ones for the search prompt when
that context is active.
We make the name of the GetSelectedRefRangeForDiffFiles very specific on purpose
to make it clear that this is only for switching to diff files, so the
implementations can make assumptions about that (unlike GetSelectedRef, which is
used for different purposes and needs to stay more generic).
Right now it doesn't do very much yet, but it's still worth it even in this
state, I'd say. The function is going to become a bit longer in the next commit,
though.
In other views that show lists of commits (reflog and stash) it doesn't make
sense to show a range diff of selected entries because they don't form a linear
sequence, so we keep the previous behavior of showing the diff for the free end
of the selection range in those view.
The same applies to the commits view if the selection range includes rebasing
todos; these can have an arbitrary order, and a range diff doesn't make sense
for those.
Hopefully this will help alleviate the problem that diffing mode is sticky, and
you often forget that it's still on.
Make it magenta like the mode text in the information view.
This fixes two problems:
- Set the title ref to the commit description (like
SwitchToDiffFilesController.enter does), rather than just the hash
- SetTitleRef only sets the title of the DynamicTitleBuilder, but doesn't set it
on the view; this only happens in ContextMgr.Activate, so you'd have to switch
to a different side panel and then back to see the new title.
The three nested `if` statements may looks strange, and you might wonder why we
don't have single one with &&. The answer is that later in this branch we will
add an `else` block to the middle one.
In the next commit it will be reused for checking whether we need to reset the
patch; and extracting it makes it easier to extend it for non-sticky diff ranges
later in the branch.
viewFiles is only called from enter; it doesn't make much sense to fill in a
SwitchToCommitFilesContextOpts struct to pass it to viewFiles for this one call.
Simply inline viewFiles into enter and get rid of all that.
I found this indirection confusing when reading the code. It looks like
SwitchToDiffFilesController is instantiated with different such contexts, but
it's always Contexts.CommitFiles, so just use that directly.
