There are two ways to jump to the editor on a specific line: pressing `e` in the
staging or patch building panels, or clicking on a hyperlink in a delta diff. In
both cases, this works perfectly in the unstaged changes view, but in other
views (either staged changes, or an older commit) it can often jump to the wrong
line; this happens when there are further changes to the file being viewed in
later commits or in unstaged changes.
This commit fixes this so that you end up on the right line in these cases.
When pressing `e` on line 5 in a diff of an older commit, we expect it to take
us to line 5 in that file. But we end up on line 2, because the file had further
changes both in newer commits, and in the unstaged changes of the working copy.
This updates gocui to include https://github.com/jesseduffield/gocui/pull/68 and
https://github.com/jesseduffield/gocui/pull/69, which changes views to not have
an extra blank line at the end when content ending in a newline character is
written to them. This makes text views more consistent with list views, which
don't have a blank line after the last list entry either.
The easiest way to do that is to rename the local branch after pushing.
This shows various levels of brokenness for the reset and rebase to upstream
commands: both menu entries display the wrong upstream branch name in the menu
(the local one rather than the remote one); executing the rebase command works
correctly though, the rebase command uses the right branch name. Resetting
fails, though.
We'll fix this in the next commit.
This makes it possible to "silently" disable a keybinding. The effect is the
same as putting the check in the handler and returning nil from there, except
that doing it this way also hides it from the bottom line if DisplayOnScreen is
true.
It should have been half-screen from the get-go. I think I just used
full-screen to make demos look nicer. Now that we have a CLI arg for the
screen mode we can make use of that in the demos.
Introduce a new "screen-mode" command line argument that allows a user
to specify which screen mode (normal, half or full) Lazygit should use
when it runs.
This argument will take precedence over a default Window Size specified
in user config.
When the user checks out a commit which has a local branch ref attached
to it, they can select between checking out the branch or checking out
the commit as detached head.
In 5a3049485c we changed the execution of shell commands to use an interactive
shell (-i), because this allows users to use aliases or shell functions, which
is a nice convenience.
Since then, however, many users have reported problems with lazygit not coming
back to the foreground after executing a shell command. Some users report that
appending "; exit" to the end of the command line solves this. I don't really
understand what the cause of this problem was, or why appending "; exit" solves
it, but if it helps, let's do it.
Sometimes we populate the commit message panel with a pre-created commit
message. The two cases where this happens is:
- you type `w` to commit, in which case we put the skipHookPrefix in the subject
- you have a commitPrefix pattern, in which case we match it against the branch
name and populate the subject with the replacement string if it matches
In either case, if you have a preserved commit message, we use that.
Now, when you use either of these and then cancel, we preserve that initial,
unchanged message and reuse it the next time you commit. This has two problems:
it strips spaces, which is a problem for the commitPrefix patterns, which often
end with a space. And also, when you change your config to experiment with
commitPrefix patterns, the change seemingly doesn't take effect, which can be
very confusing.
To fix both of these problems, only preserve the commit message when it is not
identical to the initial message.
This makes it so that when the staging view is resized, we keep the same patch
line selected (as opposed to the same view line, which may correspond to a
different patch line after resizing). It doesn't seem like a terribly important
feature for resizing the window, but it is essential when initially entering the
staging view: we select the first line of the first hunk in this case, but we do
that before layout runs. At layout time the view is then split into
unstaged/staged changes, and if this split is horizontal, the view gets narrower
and may be wrapped in a different way. With this commit we ensure that the first
line of the first hunk is still selected after that.
So far, lines in the view corresponded 1:1 to lines in the patch. Once we turn
on wrapping for the staging view (which we don't do yet), this is no longer
true, so we need to convert from view lines to patch lines or vice versa all
over the place.
This doesn't improve the code much in the current state, but we'll add some more
code to this helper function in the next commit, which makes it worth it.
We haven't needed this before since we were only using the function for text in
confirmations and menus, which is unlikely to contain tabs. We are going to use
it for patches in the staging view though, which often do.
to make it more generally usable by clients other than ConfirmationHelper, which
we will do later in this branch. Rename it to WrapViewLinesToWidth while we're
at it.
Add tests; in particular, add a sanity check that we wrap lines the same way as
gocui does. The tests that are added here are the same ones as in gocui for its
lineWrap function, but we'll extend them a bit in later commits in this branch.
This is also what we do in the staging controller, and it makes it so that when
you exit the patch building view and then enter it again (for another file, or
the same one) we select the first hunk again.
The test demonstrates that the behavior is undesirable right now: we move the
commit only past the update-ref todo of branch1, which means the order of
commits stays the same and only the branch head icon moves up by one. However,
we move the selection down by one, so the wrong commit is selected now. This is
especially bad if you type a bunch of ctrl-j quickly in a row, because now you
are moving the wrong commit.
There are two possible ways to fix this:
1) keep the moving behavior the same, but don't change the selection
2) change the behavior so that we move the commit not only past the update-ref,
but also past the next real commit.
You could argue that 1) is the more desirable fix, as it gives you more control
over where exactly the moved commit goes; however, it is much trickier to
implement, so we go with 2) for now (and that's what the commented-out
"EXPECTED" section documents here). If users need more fine-grained control,
they can always enter an interactive rebase first.
For non-merge commits we change "pick" to "drop" when we delete them. We do this
so that we can use the same code for dropping a commit no matter whether we are
in an interactive rebase or not. (If we aren't, we could just as well delete the
pick line from the todo list instead of setting it to "drop", but if we are, it
is better to keep the line around so that the user can change it back to "pick"
if they change their mind.)
However, merge commits can't be changed to "drop", so we have to delete them
from the todo file. We add a new daemon instruction that does this.
We still don't allow deleting a merge commit from within an interactive rebase.
The reason is that we don't show the "label" and "reset" todos in lazygit, so
deleting a merge commit would leave the commits from the branch that is being
merged in the list as "pick" commits, with no indication that they are going to
be dropped because they are on a different branch, and the merge commit that
would have brought them in is gone. This could be very confusing.
One of the comments we are deleting here said:
// Comparing just the hash is not enough; we need to compare both the
// action and the hash, as the hash could appear multiple times (e.g. in a
// pick and later in a merge).
I don't remember what I was thinking when I wrote this code, but it's nonsense
of course. Maybe I was thinking that the hash that appears in a "merge" todo
would be the hash of the commit that is being merged in (which would then
actually appear in an earlier pick), but it isn't, it's the hash of the merge
commit itself (so that the rebase can reuse its commit message). Which means
that hashes are unique, no need to compare the action.
So far it didn't have to handle the case where one hash is empty and the other
isn't, but in the next commit we need that, so let's handle that case correctly.
There's enough logic in the function now that it's worth covering it with tests.
Not much of a change in behavior, because moving merge commits was already not
possible. However, it failed with a cryptic error message ("Todo fa1afe1 not
found in git-rebase-todo"), so disable it properly instead.
When enabled, it adds "+n -m" after each file in the Files panel to show how
many lines were added and deleted, as with `git diff --numstat` on the command
line.
Opening links containing ampersands inside lazygit (a pull-request
creation page in BitBucket Server, for instance) returns the following
Powershell error:
> The ampersand (&) character is not allowed. The & operator is reserved
> for future use; wrap an ampersand in double quotation marks ("&") to
> pass it as part of a string.
We fix it by enclosing the URL in single quotes.
The OS command to open file in explorer in WSL doesn't currently work as
expected; it always opens the file explorer at the default opening
location. This is because the {{filename}} variable returns the path in
WSL format, and not in the format expected by Windows.
We use wslpath, a utility shipped with WSL, to make the path conversion.
It is needed by both call sites of this function. This has the added benefit
that the argument doesn't unnecessarily show up in the status view when diffing
mode is on.
In 67b8ef449c we changed the "edit" command to insert a "break" after the
selected commit, rather than setting the selected todo to "edit". The reason for
doing this was that it now works for merge commits too.
Back then, I claimed "In most cases the behavior is exactly the same as before."
Unfortunately that's not true, there are two reasons why the previous behavior
was better (both are demonstrated by tests earlier in this branch):
- when editing the last commit of a branch in the middle of a stack of branches,
we are now missing the update-ref todo after it, which means that amending the
commit breaks the stack
- it breaks auto-amending (see the added test earlier in this branch for an
explanation)
For these reasons, we are going back to the previous approach of setting the
selected commit to "edit" whenever possible, i.e. unless it's a merge commit.
The only scenario where this could still be a problem is when you have a stack
of branches, and the last commit of one of the branches in the stack is a merge
commit, and you try to edit that. In my experience with stacked branches this is
very unlikely, in almost all cases my stacked branches are linear.
We will need this because under some conditions we are going to use this
function to edit a range of commits, and we can't set merge commits to "edit".
This corresponds to the code in startInteractiveRebaseWithEdit which has similar
logic.
It is a bit unfortunate that we will have these two different ways of setting
todos to edit: startInteractiveRebaseWithEdit does it after stopping in the
rebase, in the Then function of its refresh, but InteractiveRebase does it in
the daemon with a ChangeTodoActionsInstruction. It still makes sense though,
given how InteractiveRebase works.
This not only affects "edit", but also "drop", "fixup", and "squash".
Previously, when trying to use these for a range selection that includes a merge
commit, they would fail with the cryptic error message "Some todos not found in
git-rebase-todo"; now they simply exclude the merge commit. I'm not sure if one
is better or worse than the other, and we should probably simply disable the
commands when a merge commit is selected, but that's out of scope in this PR.
This is very similar to edit_range_select_outside_rebase.go, except that it
selects commits right after, and including, a merge commit.
This test already works correctly. The reason we add it is that we are going to
have two different implementations of the `e` command depending on whether the
last selected commit is a merge commit, and we want to make sure they both work
with a range selection.
Auto-amending is a little-known feature of git that is very convenient once you
know it: whenever you stop at a commit marked with `edit` in an interactive
rebase, you can make changes and stage them, and when you continue the rebase
they automatically get amended to the commit you had stopped at. This is so
convenient because making changes to a commit is one of the main reasons why you
edit a commit.
Unfortunately this currently doesn't work in lazygit because we don't actually
use `edit` to stop at the first commit (instead, we add a `break` todo after it,
which doesn't have the auto-amend functionality).
We'll improve this later in this branch.
We allow deleting remote branches (or local and remote branches) only if *all*
selected branches have one.
We show the a warning about force-deleting as soon as at least one of the
selected branches is not fully merged.
The added test only tests a few of the most interesting cases; I didn't try to
cover the whole space of possible combinations, that would have been too much.
Since we want to select multiselections, this will make it easier to pass a
slice of remote branches. It does require that for the case of the local
branches panel we need to synthesize a RemoteBranch object from the selected
local branch, but that's not hard.
Mouse wheel scrolling of the custom patch view worked *unless* a file (as
opposed to a directory) is selected in the commit files view. The reason was an
obvious typo in the AttachControllers call.
This code had a lot of logic that (fortunately) didn't work because it was
buggy:
- it was supposed to wait for the auto-fetch delay before fetching for the first
time in case we start with a repo that we had open in a previous session (i.e.
that appears in the recent repos list). This code actually ran always, not
just for known repos, because the IsNewRepo flag is only set later, after this
function runs. Fortunately, the code didn't work, because time.After starts a
timer but doesn't wait for it (to do that, it would have to be
`<-time.After`).
- if the first fetch fails with error 128, it was supposed to show an error
message and not start the background fetch loop. Fortunately, this didn't work
because 1) it was guarded by isNew which is always false here, and 2) because
git's error message in this case is actually "exit code: 128", not "exit
status 128" (maybe this has changed in git at some point).
I find both of these undesirable. Whenever I open a repo I want an auto-fetch to
be triggered immediately to get my branch information up to date as quickly as
possible. And if the initial fetch fails (e.g. because one of my remotes is
offline or doesn't exist any more), then that's no reason not to start the
auto-fetch loop anyway.
So let's simplify the code to do what it did before, but with much fewer lines
of code.
Original commit message of the gocui change:
This fixes View.Size, Width and Height to be the correct (outer) size of a view
including its frame, and InnerSize/InnerWidth/InnerHeight to be the usable
client area exluding the frame. Previously, Size was actually the InnerSize (and
a lot of client code used it as such, so these need to be changed to InnerSize).
InnerSize, on the other hand, was *one* less than Size (not two, as you would
have expected), and in many cases this was made up for at call sites by adding 1
(e.g. in calcRealScrollbarStartEnd, parseInput, and many other places in the
lazygit code).
There are still some weird things left that I didn't address here:
- a view's lower-right coordinates (x1/y1) are one less than you would expect.
For example, a view with a 2x2 client area like this:
╭──╮
│ab│
│cd│
╰──╯
in the top-left corner of the screen (x0 and y0 both zero) has x1/xy at 3, not
4 as would be more natural.
- a view without a frame has its coordinates extended by 1 on all sides; to
illustrate, the same 2x2 view as before but without a frame, sitting in the
top-left corder of the screen, has coordinates x0=-1, y0=-1, x1=2, y1=2. This
is highly confusing and unexpected.
I left these as they are because they would be even more of a breaking change,
and also because they don't have quite as much of an impact on general app code.
When creating a PR against a selected branch (via O = "create pull request
options"), the user will first be asked to select a remote (if there is more
than one). After that, the suggestion area is populated with all remote branches
at that origin - instead of all local ones. After all, creating a PR against a
branch that doesn't exist on the remote won't work.
Please note that for the "PR is not filed against 'origin' remote" use case
(e.g. when contributing via a fork that is 'origin' to a GitHub project that is
'upstream'), the opened URL will not be correct. This is not a regression and
will be fixed in an upcoming PR.
Fixes#1826.
As far as I understand, this was needed back when the staging context was still
responsible for rendering its highlight (as opposed to the gocui view, as it is
today). It was necessary to call it with isFocused=false so that it removed the
highlight. The isFocused bool is no longer used today (and we'll remove it in
the next commit), so there's no need to render the view here any more.
This fixes flickering when leaving the staging view by pressing escape. The
reason is that in this case the patch state was already set to nil by the time
we get here, so we would render an empty view for a brief moment.
On top of that, it fixes unwanted scrolling to the top when leaving the staging
view. The reason for this is that we have code in layout that scrolls views up
if needed, e.g. because the window got taller or the view content got shorter
(added in #3839). This kicked in because we emptied the view, and scrolled it
all the way to the top, which we don't want.
This way it won't scroll to the top; we want this when entering the staging
panel or the patch building panel by clicking into the view, and also when
returning from these views by pressing escape. Note that there's a bug in this
latter case: the focused panel still scrolls to the top when hitting escape, we
will fix this in the next commit.
Change it in the same way for NewRenderStringWithScrollTask, just for
consistency, although it's not really necessary there. We use this function only
for focusing the merge conflict view, and in that case we already have an empty
task key before and after, so it doesn't change anything there.
When clicking in a single-file diff view to enter staging (or custom patch
editing, when coming from the commit files panel), and then pressing shift-down
or shift-up to select a range, it would move the selected line rather than
creating a range. Only on the next press would it start to select a range from
there.
This is very similar to the fix we made for pressing escape in 0e4d266a52.
When clicking in the main view to enter staging, and then pressing shift-down to
select a range, it moves the selection rather than selecting a two-line range.
We'll fix this in the next commit.
So far we only had tests that called Click() only once. If you have a test that
calls Click twice (we'll add one in the next commit), you'll notice that the
second click is interpreted as a drag because the mouse button wasn't released
in between. Fix this by sending a "mouse-up" event after the click.
After pasting commits once, we hide the cherry-picking status (as if it had been
reset), and no longer paint the copied commits with blue hashes; however, we
still allow pasting them again. This can be useful e.g. to backport a bugfix to
multiple major version release branches.
The string literal "\uf0868" does *not* create a single rune with the code point
f0868, as was intended; instead, it creates two runes, one with the code point
f086, followed by the character '8'.
Currently we try to delete a branch normally, and if git returns an error and
its output contains the text "branch -D", then we prompt the user to force
delete, and try again using -D. Besides just being ugly, this has the
disadvantage that git's logic to decide whether a branch is merged is not very
good; it only considers a branch merged if it is either reachable from the
current head, or from its own upstream. In many cases I want to delete a branch
that has been merged to master, but I don't have master checked out, so the
current branch is really irrelevant, and it should rather (or in addition) check
whether the branch is reachable from one of the main branches. The problem is
that git doesn't know what those are.
But lazygit does, so make the check on our side, prompt the user if necessary,
and always use -D. This is both cleaner, and works better.
See this mailing list discussion for more:
https://lore.kernel.org/git/bf6308ce-3914-4b85-a04b-4a9716bac538@haller-berlin.de/
It's maybe not very common, but it's totally possible for a remote branch to
have a different name than the local branch. This test shows that we don't
support this properly when deleting the remote branch.
This might seem controversial; in many cases the client code gets longer,
because it needs an extra line for an explicit `return nil`. I still prefer
this, because it makes it clearer which calls can return errors.
I can only guess, but I think this was a typo (or a copy-paste-o) when this code
was written. It was introduced in 55af07a1bb, and I think the defer was kept by
accident; if it had been on purpose, then the statement would have been put
right after the Lock call.
This solves several problems that arise from opening a menu while the prompt is
open. We might try to solve these in a different way, e.g. by dismissing the
search prompt before opening a menu, but restricting what you can do while the
prompt is open seems like the more robust fix.
To achieve this, we
- call resetKeyBindings both when opening and when closing the search/filter
prompt
- change the keybindings to only contain the ones for the search prompt when
that context is active.
So far, lazygit has always auto-staged files as soon as the conflict markers
disappeared from them, which means that we could rely on any file that still had
a status of "UU" to still contain conflict markers.
We are going to make the auto-staging optional in the next commit, and in that
case the user will want to manually stage "UU" files; so we must now check
whether the file contains conflict markers, and disallow the staging in that
case.
We make the name of the GetSelectedRefRangeForDiffFiles very specific on purpose
to make it clear that this is only for switching to diff files, so the
implementations can make assumptions about that (unlike GetSelectedRef, which is
used for different purposes and needs to stay more generic).
Right now it doesn't do very much yet, but it's still worth it even in this
state, I'd say. The function is going to become a bit longer in the next commit,
though.
In other views that show lists of commits (reflog and stash) it doesn't make
sense to show a range diff of selected entries because they don't form a linear
sequence, so we keep the previous behavior of showing the diff for the free end
of the selection range in those view.
The same applies to the commits view if the selection range includes rebasing
todos; these can have an arbitrary order, and a range diff doesn't make sense
for those.
Hopefully this will help alleviate the problem that diffing mode is sticky, and
you often forget that it's still on.
Make it magenta like the mode text in the information view.
This fixes two problems:
- Set the title ref to the commit description (like
SwitchToDiffFilesController.enter does), rather than just the hash
- SetTitleRef only sets the title of the DynamicTitleBuilder, but doesn't set it
on the view; this only happens in ContextMgr.Activate, so you'd have to switch
to a different side panel and then back to see the new title.
The three nested `if` statements may looks strange, and you might wonder why we
don't have single one with &&. The answer is that later in this branch we will
add an `else` block to the middle one.
In the next commit it will be reused for checking whether we need to reset the
patch; and extracting it makes it easier to extend it for non-sticky diff ranges
later in the branch.
viewFiles is only called from enter; it doesn't make much sense to fill in a
SwitchToCommitFilesContextOpts struct to pass it to viewFiles for this one call.
Simply inline viewFiles into enter and get rid of all that.
I found this indirection confusing when reading the code. It looks like
SwitchToDiffFilesController is instantiated with different such contexts, but
it's always Contexts.CommitFiles, so just use that directly.
Note that this doesn't only affect the diff views, which are the ones where we
want this, but also the status view, where the plan was to keep them underlined
always for better discoverability. We could make this configurable dynamically
(by adding another flag to ViewUpdateOpts), but actually I think it's fine this
way.
Any newly loaded custom command coming from the per-repo config file should add
to the global ones (or override an existing one in the global one), rather than
replace all global ones.
We can achieve this by simply prepending the newly loaded commands to the
existing ones. We don't have to take care of removing duplicate key assignments;
it is already possible to add two custom commands with the same key to the
global config file, the first one wins.
If a `t.FileSystem().FileContent("file.txt", Equals("bla"))` assertion fails
because the file doesn't exist, the error would say
Expected path 'file.txt' to not exist, but it does
which is very confusing.
We fixed one specific scenario where this happened ealier in this branch, but in
case there are more that we don't know about yet, at least make sure we don't
crash.
I don't know what this condition is supposed to guard against, or whether we
really need it (it was added in 06ca71e955, and the commit message of that
commit only says "fix bug"). But if we do need it, then it seems that `>=` is
more correct than `>`.
It is already possible to search a filtered list by searching first, and then
enabling a filter, so I found it inconsistent to not allow searching when you
are already filtering. One reason for not allowing this might be that the search
status (on the left) hides the filter status (on the right), but if we think
that's enough reason to not allow both at the same time, then we should cancel a
search when we enter filtering.
There are many situations where this can arise. Some examples are:
- the terminal window is small, and you are showing a view that shows more
content than fits into the view port, and the view is scrolled all the way
down; now you resize the terminal window to a taller size. Previously, the
scroll position of the view would stay the same, so it would add blank space
at the bottom; now it will scroll to fill that blank space with content
- expandFocusedSidePanel is on, you go to the bottom of a list view, now switch
to a different panel, then scroll that (now unfocused) panel all the way down
with the scroll wheel; now you focus that panel again. It becomes larger
because of the accordion behavior, but would show blank space at the bottom.
And probably others that I can't remember right now. I only remember that I
always found it confusing to look at a view that had blank space at the bottom
even though it had more content to scroll into view.
It might seem cleaner to integrate this into the text style system, so that you
could say `ts := ts.Url("some link")` and then `ts.Sprint("my text")`. However,
this would require adding a new field to TextStyle, which I didn't want to do.
It is just unexpected and confusing when it isn't.
There's something weird about the cursor position when scrolling it out of view;
it will be shown clamped to the visible area of the view (as if it had moved in
the opposite direction than the scroll direction), but then when you type
something again, or just move the cursor with the arrow keys, the view will jump
back to where the cursor really was. This looks confusing, and it might be
reason enough not to allow scrolling the view at all.
It doesn't seem to be used by anything, it looks like we only need to implement
the method so that the IController interface is satisfied. But still, it doesn't
hurt to be correct here, and might avoid confusion in the future when somebody
does try to use the method.
Since onNewRepo calls resetKeybindings, which reinitializes the keybindings for
custom commands, all we have to do for this is store a pointer to a config
instead of storing the customCommands, so we get the up-to-date ones every time.
It still doesn't update the view immediately when reloading the config, only the
next time the status panel is focused. But at least it does it then; writing the
code to update the panel when reloading the config is probably not justifiable.
This allows having per-repo config files with different languages per repo. Now
granted, this is not an important use case that we need to support; however, the
goal is to eventually make all configs hot-reloadable (as opposed to loading
them only once at startup), so this is one step in that direction.
For now we only support .git/lazygit.yml; in the future we would also like to
support ./.lazygit.yml, but that one will need a trust prompt as it could be
versioned, which adds quite a bit of complexity, so we leave that for later.
We do, however, support config files in parent directories (all the way up to
the root directory). This makes it possible to add a config file that applies to
multiple repos at once. Useful if you want to set different options for all your
work repos vs. all your open-source repos, for instance.
Currently, userConfig is only read once at startup and then never changes. Later
in this branch, we will add the possibility to reload the user config; this can
happen either when switching repositories, or when the user has edited the
config file. In both cases, reloading happens on the main thread, but the user
config could be accessed concurrently from background threads, so we need to
make this safe.
At the moment, the user config is only read once at startup, so there's no point
in writing it back to disk. However, later in this branch we will add code that
reloads the user config when switching repos, which does happen quite a bit in
integration tests; this would undo the changes that a test made in its
SetupConfig function, so write those changes to disk to prevent that from
happening.
This makes it more explicit how to deal with the different types of config
files: a user-supplied config file (via the LG_CONFIG_FILE env var) is required
to exist, whereas the default config file will be created if it is missing.
We will later extend this with repo-specific config files, which will be skipped
if missing.
Split it so createAllViews instanciates the views, and sets those properties
that are independent of the user config, and configureViewProperties which sets
those things that do depend on the user config. For now we call the second right
after the first, but later we'll call configureViewProperties after reloading
the user config.
It was added in 043cb2ea44, and the commit message was "reload config whenever
returning to gui". I don't understand what this means; Run() is called exactly
once after startup, so it would just reload the config again for no reason.
We will add a real way of reloading the config whenever it has changed later in
this branch.
We are going to make a few changes to the fields in this branch, and we can make
them with more peace of mind when we can be sure they are not accessed from
outside this package.
In practice, using path seems to work too, since Windows seems to be capable of
dealing with a path like C:/x/y instead of C:\x\y; but it's cleaner to do this
properly.
When clicking in a single-file diff view to enter staging (or custom patch
editing, when coming from the commit files panel), you needed to press escape
twice to exit, where the first press would seemingly do nothing.
The reason for this was that after clicking in the diff we end up in non-sticky
range select mode, but only with a single line selected, which is basically
indistinguishable from line select mode.
SelectedCommit is context-dependent and points to SelectedLocalCommit,
SelectedReflogCommit, or SelectedSubCommit depending on which panel is active.
If none of these panels is active, it returns the selected local commit, which
is probably the most useful default (e.g. when defining custom commands for the
Files panel).
The comments that I'm deleting here explain why we need the bool; however, in
our case that's a theoretical issue. It would only arise if we ever were to pass
a nil context to SetParentContext, which we never do.
The folder custom_commands contained tests for both custom commands (the ones
you configure in config.yml) and shell commands (the ones you execute at the ":"
prompt). I always found this confusing, so separate these into two different
folders.
Also, use the user's shell (from the SHELL env variable) instead of bash. Both
of these together allow users to use their shell aliases or shell functions in
the interactive command prompt.
This change reduces the number of calls during application startup to
one, calling GetRepoPaths() earlier than previously and plumbing the
repoPaths struct around to achieve this end.
- Introduced a new optional user config command, allBranchesLogCmds
- When pressing 'a' in the Status view, cycle between non-empty, non-identical log commands
- There will always be at least one command to run, since allBranhesLogCmd has a default
- Update documentation & write an integration test
- Update translation string
The current behaviour when creating a new branch off of a remote branch
is to always track the branch it was created from.
For example, if a branch 'my_branch' is created off of the remote branch
'fix_crash_13', then 'my_branch' will be tracking the remote
'fix_crash_13' branch.
It is common practice to have both the local and remote branches named
the same when the local is tracking the remote one. Therefore, it is
reasonable to expect that 'my_branch' should not track the remote
'fix_crash_13' branch.
The new behaviour when creating a new branch off of a remote branch is
to track the branch it was created from only if the branch names match.
If the branch names DO NOT match then the newly created branch will not
track the remote branch it was created from.
For example, if a user creates a new branch 'fix_crash_13' off of the
remote branch 'fix_crash_13', then the local 'fix_crash_13' branch will
track the remote 'fix_crash_13' branch.
However, if the user creates a new branch called 'other_branch_name' off
of the remote branch 'fix_crash_13', then the local 'other_branch_name'
branch will NOT track the remote 'fix_crash_13' branch.
No content changes yet, because nobody has edited anything in Crowdin so far.
However, this changes a few `\u003` to `<` (pretty sure that was an artefact of
how we manually generated the json files in #3649), and it removes all the
translations that are identical to the English version, which I guess is a good
thing (but doesn't make a difference in practice).
I was looking for empty strings in en.json, that's how I found this one. It
resulted in an empty log entry when adding a co-author to an existing commit.
It seems that the embed.FS always uses foreward slashes, even on
Windows.
This not only affected generating the cheatsheets, but also loading a
translation file in production.
The default shortcut to open git difftool (ctrl+t) is not available on
the "Local Branches" window. It is available when selecting a commit
from a local branch, a remote branch, or a tag from the "Local Branches"
window.
This is inconsistent since branches or tags are also commits, the
shortcut should also work on them directly.
This commit remedies this inconsistency by allowing the use of the
shortcut directly on a branch or a tag. The shortcut works both in the
"standard" mode and the "diffing" mode.
This reverts commit 3af545daf7, reversing
changes made to 629b7ba1b8.
We changed our mind about this and want to provide different options for
achieving the same thing, but with more flexibility.
The highlight is normally turned off in HandleFocusLost, but that's not called
when using ReplaceContext (and changing this would be a lot of work, it seems),
so turn it off manually here for now.
Probably not the most import feature in the world, but when resizing the
terminal window while multiple popup panels were open at the same time, we would
only resize the topmost one.
The main reason for changing this is because it makes the next commit easier to
implement.
This is how we do it for confirmation with suggestions too, so be consistent. It
will make things easier later in this branch if we only have one context per
"panel" on the stack, even if the panel consists of two views.
Concretely this means:
- only push the message context onto the stack when opening the panel (this
requires making the description view visible manually; we do the same for
suggestions)
- when switching between message and description, use ReplaceContext rather than
PushContext
We forgot to handle the "suggestions" and "commitDescription" view names.
Instead of listing all the names of views that can appear in popups though,
let's use the context kind for this, which feels more robust.
This is a change in behavior: previously, clicking outside of the search or
filter prompt would close the prompt, now it no longer does (because search has
a persistent popup kind, but it wasn't listed in the list of view names before).
We write a hacky, one-off script to do that. We need this script only once, so
we don't bother polishing it much. We'll re-purpose it later in the branch to
convert the English translation set to JSON; that is an operation that we need
to do regularly in the future.
An inactive selection is one where the view is part of the context stack, but
not the active view. For example, the files view when you enter the staging
panel, or any view when you open a panel.
Remove the old mechanism of clearing the highlight in Layout.
This fixes a problem with a wrong highlight showing up in the staging panel when
entering a file with only staged changes.
Reproduction recipe:
1. stage all changes in a file by pressing space on it in the files panel
2. enter the staged changes panel by pressing enter
3. unstage one of the changes
This makes the unstaged changes panel visible, but keeps the focus in the staged
changes panel. However, the highlight in the unstaged changes view becomes
visible, as if it were focused.
To explain why this happens, you need to know how the selection highlighting of
a view is turned on or off. It is turned on when it gains the focus, i.e. when
ActivateFocus is called on it, which in turn happens when PushContext is called.
It is turned off in Layout when gocui sees that the current view is no longer
the same as last time, in which case it calls onViewFocusLost on the previous
current view.
This mechanism only works reliably when there is at most one PushContext call
per event handler. If there is more than one, then the first one gets its
highlight turned on, then the second one, but since gocui has never seen the
first one as the active view in Layout, it doesn't get the highlight turned off
again even though it should.
And this happens in the above scenario. When pressing enter on a file with only
staged changes, we first push the staging context (in
FilesController.EnterFile), and then later we push the stagingSecondary context
when we realize we only have staged changes. This leaves the highlight of the
staging context on.
runewidth.StringWidth is an expensive call, even if the input string is pure
ASCII. Improve this by providing a wrapper that short-circuits the call to len
if the input is ASCII.
Benchmark results show that for non-ASCII strings it makes no noticable
difference, but for ASCII strings it provides a more than 200x speedup.
BenchmarkStringWidthAsciiOriginal-10 718135 1637 ns/op
BenchmarkStringWidthAsciiOptimized-10 159197538 7.545 ns/op
BenchmarkStringWidthNonAsciiOriginal-10 486290 2391 ns/op
BenchmarkStringWidthNonAsciiOptimized-10 502286 2383 ns/op
In d5b4f7bb3e and 58a83b0862 we introduced a combined mechanism for rerendering
views when either their width changes (needed for the branches view which
truncates long branch names), or the screen mode (needed for those views that
display more information in half or full screen mode, e.g. the commits view).
This was a bad idea, because it unnecessarily rerenders too many views when just
their width changes, which causes a noticable lag. This is a problem, for
example, when selecting a file in the files panel that has only unstaged
changes, and then going to one that has both staged and unstaged changes; this
splits the main view, causing the side panels to become a bit narrower, and
rerendering all those views took almost 500ms on my machine. Another similar
example is entering or leaving staging mode.
Fix this by being more specific about which views need rerendering under what
conditions; this improves the time it takes to rerender in the above scenarios
from 450-500s down to about 20ms.
This reintroduces the code that was removed in 58a83b0862, but in a slightly
different way.
The rendering of remote branches is in no way dependent on the width of the view
(or the screen mode). Unlike in the local branches view, we don't truncate long
branch names here (because there's no more information after them).
This is an error introduced in d5b4f7bb3e.
For checkboxes it probably doesn't really make sense to use them yet, because
we'd have to find a way how you can toggle them without closing the dialog; but
we already provide rendering for them to lay the ground.
But radio buttons can be used already, because for those it is ok to close the
dialog when choosing a different option (as long as there is only one grounp of
radio buttons in the panel, that is).
Strike it through if not applicable. This will hopefully help with confusion
about the meaning of "all" in the "Discard all changes" entry; some people
misunderstand this to mean all changes in the working copy. Seeing the "Discard
unstaged changes" item next to it hopefully makes it clearer that "all" is meant
in contrast to that.
Several custom patch commands on parts of an added file would fail with the
confusing error message "error: new file XXX depends on old contents". These
were dropping the custom patch from the original commit, moving the patch to a
new commit, moving it to a later commit, or moving it to the index.
We fix this by converting the patch header from an added file to a diff against
an empty file. We do this not just for the purpose of applying the patch, but
also for rendering it and copying it to the clip board. I'm not sure it matters
much in these cases, but it does feel more correct for a filtered patch to be
presented this way.
We're going to add another argument in the next commit, and that's getting a bit
much, especially when most of the arguments are bool and you only see true and
false at the call sites without knowing what they mean.
This currently works (albeit with a bit of manual work, as the user needs to
resolve conflicts), and we add this test just to make sure that we don't break
it with the following change.
This currently works, we add it as a regression test to make sure we don't break
it. It is an interesting test because it turns the deletion of the file in the
moved-from commit into a modification.
This is important when using a pager that draws a horizontal line across the
entire width of the view; when changing from a file or directory that has only
unstaged (or only staged) changes to one that has both, the main view is split
in half, but the PTY task would be run on the view in its old state, so the
horizonal line would be too long and wrap around.
All PTYs were created with the size of the main view, on the assumption that
main and secondary always have the same size. That's not true though; in
horizontal split mode, the width of the two views can differ by one because of
rounding, and when using a pager that draws a horizontal line across the width
of the view, this is visible and looks very ugly.
When switching to a repo that was open before, the context tree is reused, so
before adding keybinding functions to those contexts again, we need to clear the
old ones.
When refreshViewportOnChange is true, we would refresh the viewport once at the
end of FocusLine, and then we would check at the end of AfterLayout if the
origin has changed, and refresh again if so. That's unnecessarily complicated,
let's just unconditionally refresh at the end of AfterLayout only.
We want to add an additional method to ISearchableContext later in this branch,
and this will make sure that we don't forget to implement it in any concrete
context.
Searching in the "Divergence from upstream" view would select the wrong lines.
The OnSearchSelect function gets passed a view index, and uses it to select a
model line. In most views these are the same, but not in the divergence view
(because of the Remote/Local section headers).
ListContextTrait.OnSearchSelect was introduced in 138be04e65, but it was never
called. I can only guess that a planned refactoring wasn't finished here.
Unfortunately it isn't possible to delete them. This would often be useful, but
our todo rewriting mechanisms rely on being able to find todos by some
identifier (hash for pick, ref for update-ref), and exec todos don't have a
unique identifier.
If exactly one candidate from inside the current branch is found, we return that
one even if there are also hunks belonging to master commits; we disregard those
in this case.
Copy the slice into a variable and use that throughout the whole operation; this
makes us a little more robust against the model refreshing concurrently.
It has two modified hunks, one for a master commit and one for a branch commit.
Currently we get an error mentioning those two commits, but we would like to
silently select the branch commit.
Put it into the individual menu items instead.
Again, this is necessary because we are going to add another entry to the menu
that is independent of the selected branch.
Instead, disable the individual entries in the menu.
This is necessary because we are going to add another entry to the menu that is
independent of the selected branch.
Previously the entire status was colored in a single color, so the API made
sense. This is going to change in the next commit, so now we must include the
color in the string returned from BranchStatus(), which means that callers who
need to do hit detection or measure the length need to decolorize it.
While we're at it, switch the order of ↑3↓7 to ↓7↑3. For some reason that I
can't really explain I find it more logical this way. The software out there is
pretty undecided about it, it seems: VS Code puts ↓7 first, and so does the
shell prompt that comes with git; git status and git branch -v put "ahead" first
though. Shrug.
It is a valid case for a branch to share no history with any of the main
branches, in which case git merge-base returns an error (and an empty string).
Since we can't distinguish this from one of the main branches having been
deleted, we shouldn't invalidate the cache in that case.
Use Equals instead of Contains for asserting the status view content. This
solves the problem that we might assert Contains("↓2 repo"), but what it really
shows is "↑1↓2 repo", and the test still succeeds. At best this is confusing.
Also, this way we don't have to use the awkward DoesNotContain to check that it
really doesn't show a checkmark.
To do this, we need to fix two whitespace problems:
- there was always a space at the end for no reason. Simply remove it. It was
added in efb51eee96, but from looking at that diff it seems it was added
accidentally.
- there was a space at the beginning if the branch status was empty. This is
actually a cosmetic problem, for branches without a status the text was
indented by once space. Change this so that the space is added conditionally.
It's a bit awkward that we have to use Decolorise here, but this will go away
again later in this branch.
We aren't using them, yet, except for deciding whether to show the warning about
hunks with only added lines.
Add a bit of test coverage for parseDiff while we're at it.
This broke with 81b497d186 (#3387). In that PR I claimed that we never want to
ask for force-pushing if the server rejected the update, on the assumption that
this can only happen because the remote tracking branch is not up to date, and
users should just fetch in this case. However, I didn't realize it's even
possible to have a branch whose upstream branch is not stored locally; in this
case we can't tell ahead of time whether a force push is going to be necessary,
so we _have_ to rely on the server response to find out. But we only want to do
that in this specific case, so this is not quite an exact revert of 81b497d186.
This broke with #3528.
If the remote branch is not stored locally, we only see question marks in the
branch status. In this case we can't tell whether we need to force-push, so it's
best to assume that we don't, and see if the server rejects the push, and react
to that by asking to force push. This second part is also broken right now,
we'll fix this in the next commit.
When branches are sorted by recency we have this logic that first loads the
branches so that they can be rendered quickly; in parallel, it starts loading
the reflog in the background, and when that's done, it loads the branches again
so that they get their recency values. This means that branches are loaded twice
at startup.
We don't need this logic when branches are not sorted by recency, so we can
simply load branches and reflog in parallel like everything else.
This shouldn't change any user observable behavior, it just avoids doing
unnecessary work at startup.
For tooltips that are just one or two characters longer than the available
width, the last word would be cut off. On my screen this happened for the
tooltip for the fixup command.
It can optionally be used to set the title of the panel that shows the output of
a command (when showOutput is true). If left unset, the command string is used
as the title.
To determine whether we need to ask for force pushing, we need to query the push
branch rather than the upstream branch, in case they are not the same.
In a triangular workflow the branch that you're pulling from is not the same as
the one that you are pushing to. For example, some people find it useful to set
the upstream branch to origin/master so that pulling effectively rebases onto
master, and set the push.default git config to "current" so that "feature"
pushes to origin/feature.
Another example is a fork-based workflow where "feature" has upstream set to
upstream/main, and the repo has remote.pushDefault set to "origin", so pushing
on "feature" pushes to origin/feature.
This commit adds new fields to models.Branch that store the ahead/behind
information against the push branch; for the "normal" workflow where you pull
and push from/to the upstream branch, AheadForPush/BehindForPush will be the
same as AheadForPull/BehindForPull.
Our code doesn't realize that we need to prompt the user to force push, when the
branch is up-to-date with its upstream but not with the branch that we're
pushing to.
It is unexpected that a function called PushBranch also sets the upstream
branch; also, we want to add a PushBranch function in the next commit that
doesn't.
This guards against accidentally renaming a model field and thereby breaking
user's custom commands. With this change we'll get a build failure when we do
that.
In go 1.22, loop variables are redeclared with each iteration of the
loop, rather than simple updated on each iteration. This means that we
no longer need to manually redeclare variables when they're closed over
by a function.
For custom commands it is useful to select an earlier command and have it copied
to the prompt for further editing. This can be done by hitting 'e' now.
For other types of suggestion panels we don't enable this behavior, as you can't
create arbitrary new items there that don't already exist as a suggestion.
In the custom commands panel you can now tab to the suggestions and hit 'd' to
delete items from there. Useful if you mistyped a command and don't want it to
appear in your history any more.
- If _not_ inside a neovim session, treat as
a normal nvim session and suspend lazygit.
- If inside a neovim session:
- Do not try to suspend lazygit.
- Send `q` keystroke to neovim session to quit lazygit.
- Send filename/line/etc. to neovim session.
We are going to truncate overly long lines returned from git log, and the most
likely field that is going to make the line too long is the subject; so we must
put it last, otherwise we'd end up with not enough fields to split when it's too
long.
It might not be obvious from the diff what's happening to the mock command
output in the test: it didn't have the divergence field (">") at all, which was
kind of a bug. It didn't matter for these tests though, because we are not
testing the divergence here, and our production code happens to be resilient
against it missing. But now we must add the ">" field before the subject.
Scanners can return errors (e.g. ErrTooLong), and if we don't handle it, the
cmd.Wait() call below will block forever because nobody drains the command's
output.
This happens for CommitLoader.GetCommits when there's a commit whose subject
line is longer than approx. 65500 characters; in that case, lazygit would lock
up completely. With this fix it remains usable, but the commit list is truncated
before the bad commit, which is not good enough. We'll improve that in the
remaining commits of this branch.
Deadlock reporting broke in e1ceb6892a; since then, it was *off* when running
debug builds normally, but *on* when debugging an integration test. Both of
which are exactly opposite of what we want.
Change `func displayCommit()` so all the individual strings are built first,
then the whole thing `cols` is put together. Before, most strings were built
prior to constructing `cols`, but a few were built inside the `cols`
construction.
The rebase.updateRefs feature of git is very useful to rebase a stack of
branches and keep everything nicely stacked; however, it is usually in the way
when you make a copy of a branch and want to rebase it "away" from the original
branch in some way or other. For example, the original branch might sit on main,
and you want to rebase the copy onto devel to see if things still compile there.
Or you want to do some heavy history rewriting experiments on the copy, but keep
the original branch in case the experiments fail. Or you want to split a branch
in two because it contains two unrelated sets of changes; so you make a copy,
and drop half of the commits from the copy, then check out the original branch
and drop the other half of the commits from it.
In all these cases, git's updateRefs feature insists on moving the original
branch along with the copy in the first rebase that you make on the copy. I
think this is a bug in git, it should create update-ref todos only for branches
that point into the middle of your branch (because only then do they form a
stack), not when they point at the head (because then it's a copy). I had a long
discussion about this on the git mailing list [1], but people either don't agree
or don't care enough.
So we fix this on our side: whenever we start a rebase for whatever reason, be
it interactive, non-interactive, or behind-the-scenes, we drop any update-ref
todos that are at the very top of the todo list, which fixes all the
above-mentioned scenarios nicely.
I will admit that there's one scenario where git's behavior is the desired one,
and the fix in this PR makes it worse: when you create a new branch off of an
existing one, with the intention of creating a stack of branches, but before you
make the first commit on the new branch you realize some problem with the first
branch (e.g. a commit that needs to be reworded or dropped). It this case you do
want both branches to be affected by the change. In my experience this scenario
is much rarer than the other ones that I described above, and it's also much
easier to recover from: just check out the other branch again and hard-reset it
to the rebased one.
[1]
https://public-inbox.org/git/354f9fed-567f-42c8-9da9-148a5e223022@haller-berlin.de/
Sometimes it takes a while to get PRs accepted upstream, and this blocks our
progress. Since I'm pretty much the only one making changes there anyway, it
makes sense to point to my fork directly.
It is now only used as the error handler that is passed to gocui.Gui on
construction; it's not a client-facing API any more. Also, it doesn't have to
handle gocui.ErrQuit, as gocui takes care of that.
This lets us get rid of a few more calls to Error(), and it simplifies things
for clients of OnWorker: they can simply return an error from their callback
like we do everywhere else.
In Gui.onWorker we only make the minimum possible change to get things to
compile after the API-breaking change of the gocui update; we'll make this
cleaner later in this branch.
We upgraded our minimum Go version to 1.21 in commit
57ac9c2189. We can now replace our
`utils.Min` and `utils.Max` functions with the built-in `min` and `max`.
Reference: https://go.dev/ref/spec#Min_and_max
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Unfortunately the migration code requires yaml v3, but our yaml fork is based on
v2, so we need to import both in app_config.go in this commit, which is ugly. We
can clean this up in the next commit.
Make it recognize URLs wrapped in angle brackets, and followed by punktuation.
We don't need this for the status panel, but we will need it for confirmation
panels.
Changing globals in the init() function of a test file is a bad idea, as it
affects all other tests that run after it. Do it explicitly in each test
function that needs it, and take care of restoring the previous value
afterwards.
