When building multi-step custom command forms, some prompts are only
relevant depending on earlier answers. Without conditional logic,
users must dismiss irrelevant prompts manually.
Prompts now accept a `condition` field with a template expression
evaluated against prior form values. Skipped prompts default to
an empty string.
The template expression is a string pre- and suffixed with double curly
braces - {{}}.
Form keys can be reused, a guard ensures that skipped prompts do not
reset already set form keys with an empty string. This allows the
conditional flow to remind a user to set a key that was left empty
because additional conditions want that key to be set. This removes the
need to have additional if checks in the command that uses the form
keys.
For the branches panel we might consider unifying it with the existing `o`
command for creating a PR: it could check if there is a PR already, and open it
if so, or create a new one if not.
However, I also want the command in the local commits panel for the checked out
branch, and there's no existing "Create PR" command there; and the `o` command
opens the selected commit in the browser, so it's unrelated.
Set the sort order's default from the former foldersFirst to mixed, so this is a
change in behavior. I find this useful because it now matches git's order, so if
you look at the diff of a commit, the TOC at the top has the same order as the
file tree you see when entering the commit.
This commit implements the ability to cycle backward through different
all branches log visualization modes, complementing the existing forward
cycling functionality. Users can now press 'A' (Shift+a) to cycle in
reverse through the available log graph views, improving navigation
efficiency when they overshoot their desired view.
Changes:
- Added RotateAllBranchesLogIdxBackward() method to BranchCommands for
backward rotation through log command candidates
- Introduced AllBranchesLogGraphReverse keybinding configuration with
default key 'A' (uppercase)
- Implemented switchToOrRotateAllBranchesLogsBackward() handler in
StatusController that mirrors forward cycling logic
- Added English translation for "Show/cycle all branch logs (reverse)"
The implementation uses modulo arithmetic with proper handling of
negative indices to ensure seamless backward cycling through the
available log visualization options.
I've optimised for muscle memory backwards compatibility here:
- Outside interactive rebase: press 'f' then instead of a confirmation
panel, a menu appears where you can choose to keep the selected commit's
message
- Inside interactive rebase: press 'f' then press 'c' to see the menu
for keeping the message, where if you press 'c' again it will retain the
current message. so 'fcc' is the chord to press.
We're also now showing the -C flag (which is what enables the behaviour)
against the todo.
I've picked the 'c' keybinding because 'C' was taken and it corresponds
to the flag. Previously that showed a warning about a change in
keybinding for cherry picking but it's been ages since we've made that
change so I'm happy to retire it.
This is an object that is owned by Gui, is accessible through GuiCommon.State(),
and also passed down to GitCommand, where it is mostly needed. Right now it
simply wraps access to the Git.Paging config, which isn't very exciting, but
we'll extend it in the next commit to handle a slice of pagers (and maintain the
currently selected pager index), and doing this refactoring up front allows us
to make that change without having to touch clients.
We want to switch to have paragraphs consistently on one line, and auto-wrap
them automatically when generating Config.md.
The changes to Config.md in this commit are temporary.
Replace merge-tool with merge options menu that allows resolving all
conflicts for selected files as ours, theirs, or union, while still
providing access to the merge tool.
It seems useful to have the flexibility to remap "enter" in confirmations to
"y", but keep "enter" for menus and suggestions (even though we sometimes use
menus as confirmations, but it's still good to give users the choice).
This is similar to using lazygit's Git.Paging.ExternalDiffCommand config, except
that the command is configured in git. This can be done either with git's
`diff.external` config, or through .gitattributes, so it gives a bit more
flexibility.
Many people don't understand what this means, which is apparent from the amount
of issues that got filed because of this. Let's get rid of it to avoid this
confusion. People will have to configure their pager twice if they want to use
it both on the command line and in lazygit, which I think is not a big deal.
This frees up ctrl-z for suspend. Hopefully, redo is not such a frequently used
operation that the change annoys people.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
At the same time, we change the defaults for both of them to "date" (they were
"recency" and "alphabetical", respectively, before). This is the reason we need
to touch so many integration tests. For some of them I decided to adapt the test
assertions to the changed sort order; for others, I added a SetupConfig step to
set the order back to "recency" so that I don't have to change what the test
does (e.g. how many SelectNextItem() calls are needed to get to a certain
branch).
When toggling the value in the UI we simply overwrite the value in UserConfig;
this would be bad if there was ever a chance that we want to write the user
config back to disk, but it is very unlikely that we can do that, because
currently we have no way to tell which parts of the config come from the global
config file and which ones come from a repo-local one.
This is for the unlikely case that a repo-local config file can't be written
back after migration; in this case we can't log the migration changes to the
console, so include them in the error popup instead.
This might be useful to see in general (users will normally only see it after
they quit lazygit again, but still). But it is especially useful when writing
back the config file fails for some reason, because users can then make these
changes manually if they want.
We do this only at startup, when the GUI hasn't started yet. This is probably
good enough, because it is much less likely that writing back a migrated
repo-local config fails because it is not writeable.
Most migrations happen at startup when loading the global config file, at a time
where the GUI hasn't been initialized yet. We can safely print to the console at
that point. However, it is also possible that repo-local config files need to be
migrated, and this happens when the GUI has already started, at which point we
had better not print anything to stdout; this totally messes up the UI.
In this commit we simply suppress the logging when the GUI is running already.
This is probably good enough, because the logging is mostly useful in the case
that writing back the migrated config file fails, so that users understand
better why lazygit doesn't start up; and this is very unlikely to happen for
repo-local config files, because why would users make them read-only.
It's a bit silly to find out by string comparison whether computeMigratedConfig
did something, when it knows this already and can just return the information.
This doesn't make a huge difference to the production code; the string
comparison isn't very expensive, so this isn't a big deal. However, it makes the
tests clearer; we don't have to bother specifying an expected output string if
the didChange flag is false, and in particular we can get rid of the ugly "This
test intentionally uses non-standard indentation" bit in one of the tests.
The default binding for ConfirmInEditor is <a-enter>, which has two problems:
- some terminal emulators don't support it, including the default terminal on
Mac (Terminal.app)
- on Windows it is bound to toggling full-screen
Ideally we would use <c-enter> instead (and Command-Enter on Mac), but neither
is possible without https://github.com/gdamore/tcell/issues/671, so for the time
being add an alternate keybinding which works everywhere.
Show both bindings in the footer of the commit description panel if they are
both non-null. While we're at it, fix the footer for the case where either or
both of the keybindings are set to <disabled>.
And finally, change "commit" to "submit" in that footer; we use the same panel
also for creating tags, in which case "commit" is not quite right.
Fish shell does not support "&&" and "||" operators like
POSIX-compatible shells. Instead, it uses a different syntax structure
based on begin/end and if/else.
This caused existing lazygit nvim-remote integration templates to break
when fish was the user's default shell.
This commit adds explicit fish shell detection using the FISH_VERSION
environment variable, and provides fish-compatible templates that
correctly handle launching Neovim or sending remote commands via $NVIM.
Fixes behavior where edits would not open in a new Neovim tab or line
navigation would fail when $NVIM was set.
Ensures smoother editing experience for users running fish shell
(supported since Nov 2012 with FISH_VERSION).
In this commit this is only possible by pressing '0' in a side panel; we'll add
mouse clicking later in the branch.
Also, you can't really do anything in the focused view except press escape to
leave it again. We'll add some more functionality in a following commit.
There is a section at the end with deprecated settings, and a comment saying
"The following configs are all deprecated". The clipboard-related settings were
accidentally added to that section; they are not deprecated, so move them up to
before that section.
Previously the schema only allowed a single value; however, it is now possible
to specify multiple values separated by comma, and you would get very ugly red
error squiggles in VS Code when you did that.
The only solution that I can see is to get rid of the "enum" specification, and
mention the valid values only in the description. Add examples too so that you
get at least auto-completion.
When enabled, it adds "+n -m" after each file in the Files panel to show how
many lines were added and deleted, as with `git diff --numstat` on the command
line.
Opening links containing ampersands inside lazygit (a pull-request
creation page in BitBucket Server, for instance) returns the following
Powershell error:
> The ampersand (&) character is not allowed. The & operator is reserved
> for future use; wrap an ampersand in double quotation marks ("&") to
> pass it as part of a string.
We fix it by enclosing the URL in single quotes.
