Only do this when an onSwitchToEditor function is actually provided. For the
"Move patch into new commit" command we don't, because it isn't totally
straightforward in that case.
This is useful for when you begin to type the message in lazygit's commit panel,
and then realize that you'd rather use your editor's more powerful editing
capabilities. Pressing <c-o> will take you right there.
When navigating in the commits view to a line that is out of view (e.g. by
pressing , or . to scroll by page, or < or > to scroll to the top or bottom),
the commit graph was not correctly highlighted. Fix this by rerendering the
viewport in this case.
It determines the yellow/red status by getting the merge-base between the
current branch and its upstream; while we're rebasing, the current branch is
HEAD, so it tried to get the merge-base between HEAD and HEAD{u}, which doesn't
work. Fix this by passing the name of the checked-out branch separately.
Previously, when pressing right-arrow when the cursor is already in the last
hunk, it would jump back to the beginning of that hunk. This can be confusing if
the hunk is long, maybe the start of the hunk is already scrolled off the top of
the window, and then pressing right-arrow actually scrolls *backwards*, which is
counter-intuitive. It's better to do nothing in this case.
Same for left-arrow when the cursor is already in the first hunk, although here
the problem is not so severe (unless diff context was increased by a huge
amount, and the start of the first hunk is scrolled off the bottom of the
window).
Previously, the current line was only moved as much as necessary so that it's in
view again. This had the problem that when jumping downwards from hunk to hunk
with the right-arrow key, only the first line of the new hunk was shown at the
bottom of the window. I prefer to put the selected line in the middle of the
view in this case, so that I can see more of the newly selected hunk.
This has the consequence that when scrolling through the view line by line using
down-arrow, the view jumps by half a screen whenever I reach the bottom. I can
see how some users might be opposed to this change, but I happen to like it too,
because it allows me to see more context of what's ahead.
This also fixes a bug where after the rebase each commit in the commits view had a tick against it because we hadn't
refreshed the view since the base commit was no longer marked
There's a bug in LineNumberOfLine, but the existing test coverage doesn't catch
it, as the only test case for this was one where oldStart and newStart were the
same for all hunks. Add a test case where newStart is different for one of the
hunks; this demonstrates a bug, where all expected results from index 12 on are
off by one.
If the command used by OSCommand.OpenLink fails, lazygit crashes. With this change, if the OpenLink command fails, lazygit just shows a dialog inviting the user to visit the relevant URL.
Fixes#2882
This allows us to jump back to the parent neovim process when we want to edit a file, rather than opening a new neovim
process within lazygit.
Arguably this should be the default, but I'm not familiar with the various ways people use lazygit with neovim.
This was on oversight on my part: I assumed that the --work-tree arg was
always intended for use with linked worktrees which have a .git file
pointing back to the repo.
I'm honestly confused now: seems like there are three kinds of worktrees:
* the main worktree of a non-bare repo
* a linked worktree (with its own gitdir in the repo's worktrees/ dir)
* a random folder which you specify as a worktree with the --work-tree arg
I'm pretty sure the --work-tree arg is only intended to be used with this
third kind or workree
... and import stefanhaller's tcell fork for real rather than just replacing it
This solves the problem that people trying to
"go install github.com/jesseduffield/lazygit@latest" would get the error
go: github.com/jesseduffield/lazygit@latest (in github.com/jesseduffield/lazygit@v0.40.0):
The go.mod file for the module providing named packages contains one or
more replace directives. It must not contain directives that would cause
it to be interpreted differently than if it were the main module.
The proper fix is to actually have these two functions share code,
or for views to be able to manage their own heights based on their contents.
But I want to get this out for the sake of a Lazygit Anniversary release.
Now that we refresh upon focus, we can scrap this file watching code.
Stefan says few git UIs use file watching, and I understand why: the
reason this code was problematic in the first place is that watching
files is expensive and if you have too many open file handles that
can cause problems.
Importantly: this code that's being removed was _already_ dead.
When opening lazygit with `lazygit log` the worktrees view was appearing in front of the files view.
This is because it had higher precedence than the files view in the ordered view mapping, and
that was because it originally was in the branches window so it was further down the list.
The reason this didn't cause issues on typical startup is that the files context is activated at the
start so it is brought to the front.
I've been thinking about this for a while: I think it looks really cool if nuking your working tree
actually results in a nuke animation.
So I've added an opt-out config for it
This allows to do the equivalent of "git rebase --onto <target> <base>", by
first marking the <base> commit with the new command, and then selecting the
target branch and invoking the usual rebase command there.
We are in the outsideFilterModeBindings section here; all of these handlers are
wrapped in a OutsideFilterMode guard in a loop below. No need to add one
manually here.
It's tricky to get this right for reflog commits wrt what's the current branch
for each one; so just disable it entirely here, it's probably not something
anybody needs here.
We want to mark all local branch heads with a "*" in the local commits panel, to
make it easier to see how branches are stacked onto each other. In order to not
confuse users with "*" markers that they don't understand, do this only for the
case where users actually use stacked branches; those users are likely not going
to be confused by the display. This means we want to filter out a few branch
heads that shouldn't get the marker: the current branch, any main branch, and
any old branch that has been merged to master already.
The model will be used for logic, so the full hash is needed there; a shortened
hash of 8 characters might be too short to be unique in very large repos. If
some view wants to display a shortened hash, it should truncate it at
presentation time.
- check out a non-main branch before we start
- add authors to expected commits so that we can see whether the commits show an
asterisk
- explicitly check what the top line displays after bisecting has started
This shows that the detached head shows an asterisk, which we don't want. We'll
fix that in the next commit.
This test not only tests the correct handling and display of the updateRef
command, but also the visualization of branch heads in the commits panel. Since
we are about to change the behavior here, extend the test so that a master
commit is added (we don't want this to be visualized as a branch head), and then
a stack of two non-main branches. At the end of this branch we only want to
visualize the head commit of the first.
Update-ref commands have an empty sha, and strings.HasPrefix returns true when
called with an empty second argument, so whenever an update-ref command is
present in a rebase, all commits from there on down were drawn with a green sha.
From the go 1.19 release notes:
Command and LookPath no longer allow results from a PATH search to be found relative to the current directory. This removes a common source of security problems but may also break existing programs that depend on using, say, exec.Command("prog") to run a binary named prog (or, on Windows, prog.exe) in the current directory. See the os/exec package documentation for information about how best to update such programs.
We've been sometimes using lo and sometimes using my slices package, and we need to pick one
for consistency. Lo is more extensive and better maintained so we're going with that.
My slices package was a superset of go's own slices package so in some places I've just used
the official one (the methods were just wrappers anyway).
I've also moved the remaining methods into the utils package.
In the presentation layer, when showing branches, we'll show worktrees against branches if they're
associated. But there was a race condition: if the worktree model was refreshed after the branches model,
it wouldn't be used in the presentation layer when it came time to render the branches.
A better solution would be to have some way of signalling that a particular context needs to be refreshed
and after all the models are done being refreshed, we then refresh the contexts. This will prevent
double-renders
Afero is a package that lets you mock out a filesystem with an in-memory filesystem.
It allows us to easily create the files required for a given test without worrying about
a cleanup step or different tests tripping on eachother when run in parallel.
Later on I'll standardise on using afero over the vanilla os package
When switching worktrees (which we can now do via the branch view) we re-layout the windows and their views.
We had the worktree view ahead of the file view based on the Flatten() method in context.go, because it used
to be associated with the branches panel.
We want to be using forward slashes everywhere internally, so if we get a path from windows
we should immediately convert it to use forward slashes.
I'm leaving out the recent repos list because that would require a migration
