Right now it doesn't do very much yet, but it's still worth it even in this
state, I'd say. The function is going to become a bit longer in the next commit,
though.
In other views that show lists of commits (reflog and stash) it doesn't make
sense to show a range diff of selected entries because they don't form a linear
sequence, so we keep the previous behavior of showing the diff for the free end
of the selection range in those view.
The same applies to the commits view if the selection range includes rebasing
todos; these can have an arbitrary order, and a range diff doesn't make sense
for those.
Hopefully this will help alleviate the problem that diffing mode is sticky, and
you often forget that it's still on.
Make it magenta like the mode text in the information view.
This fixes two problems:
- Set the title ref to the commit description (like
SwitchToDiffFilesController.enter does), rather than just the hash
- SetTitleRef only sets the title of the DynamicTitleBuilder, but doesn't set it
on the view; this only happens in ContextMgr.Activate, so you'd have to switch
to a different side panel and then back to see the new title.
The comments that I'm deleting here explain why we need the bool; however, in
our case that's a theoretical issue. It would only arise if we ever were to pass
a nil context to SetParentContext, which we never do.
The current behaviour when creating a new branch off of a remote branch
is to always track the branch it was created from.
For example, if a branch 'my_branch' is created off of the remote branch
'fix_crash_13', then 'my_branch' will be tracking the remote
'fix_crash_13' branch.
It is common practice to have both the local and remote branches named
the same when the local is tracking the remote one. Therefore, it is
reasonable to expect that 'my_branch' should not track the remote
'fix_crash_13' branch.
The new behaviour when creating a new branch off of a remote branch is
to track the branch it was created from only if the branch names match.
If the branch names DO NOT match then the newly created branch will not
track the remote branch it was created from.
For example, if a user creates a new branch 'fix_crash_13' off of the
remote branch 'fix_crash_13', then the local 'fix_crash_13' branch will
track the remote 'fix_crash_13' branch.
However, if the user creates a new branch called 'other_branch_name' off
of the remote branch 'fix_crash_13', then the local 'other_branch_name'
branch will NOT track the remote 'fix_crash_13' branch.
The default shortcut to open git difftool (ctrl+t) is not available on
the "Local Branches" window. It is available when selecting a commit
from a local branch, a remote branch, or a tag from the "Local Branches"
window.
This is inconsistent since branches or tags are also commits, the
shortcut should also work on them directly.
This commit remedies this inconsistency by allowing the use of the
shortcut directly on a branch or a tag. The shortcut works both in the
"standard" mode and the "diffing" mode.
Probably not the most import feature in the world, but when resizing the
terminal window while multiple popup panels were open at the same time, we would
only resize the topmost one.
The main reason for changing this is because it makes the next commit easier to
implement.
This is how we do it for confirmation with suggestions too, so be consistent. It
will make things easier later in this branch if we only have one context per
"panel" on the stack, even if the panel consists of two views.
Concretely this means:
- only push the message context onto the stack when opening the panel (this
requires making the description view visible manually; we do the same for
suggestions)
- when switching between message and description, use ReplaceContext rather than
PushContext
We forgot to handle the "suggestions" and "commitDescription" view names.
Instead of listing all the names of views that can appear in popups though,
let's use the context kind for this, which feels more robust.
This is a change in behavior: previously, clicking outside of the search or
filter prompt would close the prompt, now it no longer does (because search has
a persistent popup kind, but it wasn't listed in the list of view names before).
runewidth.StringWidth is an expensive call, even if the input string is pure
ASCII. Improve this by providing a wrapper that short-circuits the call to len
if the input is ASCII.
Benchmark results show that for non-ASCII strings it makes no noticable
difference, but for ASCII strings it provides a more than 200x speedup.
BenchmarkStringWidthAsciiOriginal-10 718135 1637 ns/op
BenchmarkStringWidthAsciiOptimized-10 159197538 7.545 ns/op
BenchmarkStringWidthNonAsciiOriginal-10 486290 2391 ns/op
BenchmarkStringWidthNonAsciiOptimized-10 502286 2383 ns/op
Several custom patch commands on parts of an added file would fail with the
confusing error message "error: new file XXX depends on old contents". These
were dropping the custom patch from the original commit, moving the patch to a
new commit, moving it to a later commit, or moving it to the index.
We fix this by converting the patch header from an added file to a diff against
an empty file. We do this not just for the purpose of applying the patch, but
also for rendering it and copying it to the clip board. I'm not sure it matters
much in these cases, but it does feel more correct for a filtered patch to be
presented this way.
We're going to add another argument in the next commit, and that's getting a bit
much, especially when most of the arguments are bool and you only see true and
false at the call sites without knowing what they mean.
If exactly one candidate from inside the current branch is found, we return that
one even if there are also hunks belonging to master commits; we disregard those
in this case.
Copy the slice into a variable and use that throughout the whole operation; this
makes us a little more robust against the model refreshing concurrently.
Put it into the individual menu items instead.
Again, this is necessary because we are going to add another entry to the menu
that is independent of the selected branch.
Instead, disable the individual entries in the menu.
This is necessary because we are going to add another entry to the menu that is
independent of the selected branch.
We aren't using them, yet, except for deciding whether to show the warning about
hunks with only added lines.
Add a bit of test coverage for parseDiff while we're at it.
When branches are sorted by recency we have this logic that first loads the
branches so that they can be rendered quickly; in parallel, it starts loading
the reflog in the background, and when that's done, it loads the branches again
so that they get their recency values. This means that branches are loaded twice
at startup.
We don't need this logic when branches are not sorted by recency, so we can
simply load branches and reflog in parallel like everything else.
This shouldn't change any user observable behavior, it just avoids doing
unnecessary work at startup.
For tooltips that are just one or two characters longer than the available
width, the last word would be cut off. On my screen this happened for the
tooltip for the fixup command.
For custom commands it is useful to select an earlier command and have it copied
to the prompt for further editing. This can be done by hitting 'e' now.
For other types of suggestion panels we don't enable this behavior, as you can't
create arbitrary new items there that don't already exist as a suggestion.
In the custom commands panel you can now tab to the suggestions and hit 'd' to
delete items from there. Useful if you mistyped a command and don't want it to
appear in your history any more.
This lets us get rid of a few more calls to Error(), and it simplifies things
for clients of OnWorker: they can simply return an error from their callback
like we do everywhere else.
When exiting filtering mode, we currently keep the selection index the same in
the commits panel. This doesn't make sense at all, since the index in the
filtered view has no relation to the index in the unfiltered view.
I often use filtering mode (either by path or by author) to find a given commit
faster than I would otherwise be able to. When exiting filtering mode, it's
useful to keep the same commit selected, so that I can look at the surrounding
commits, see which branch it was a part of, etc. So reselect the commit again
after exiting filtering mode.
Sometimes this is not possible, most likely when the commit is so long ago that
it's outside of the initial 300 range. In that case, at least select the commit
again that was selected before I entered filtering; this is still better than
arbitrarily keeping the same selection index.
We pass all of them to a single editor command, hoping that the editor will be
able to handle multiple files (VS Code and vim do).
We ignore directories that happen to be in the selection range; this makes it
easier to edit multiple files in different folders in tree view. We show an
error if only directories are selected, though.
Some operations don't support switching to the editor from the commit message
panel; an example is the commit message panel that appears when moving a custom
patch into a new commit. Disable the "open in editor" menu entry in this case,
instead of silently doing nothing.
By default we now search for substrings; you can search for multiple substrings
by separating them with spaces. Add a config option gui.filterMode that can be
set to 'fuzzy' to switch back to the previous behavior.
... and when recalling a commit message from an old commit by pressing up-arrow.
This is necessary because committing turns our soft line breaks into real ones,
but when rewording we want to turn them back into soft ones again, so that it's
possible to insert words at the beginning of a paragraph and have everything
rewrap nicely.
This is only a best effort; the algorithm only removes those hard line breaks
that can be removed without changing the way the message looks. This works well
when the previous commit message was wrapped at the same width, which for most
users should be the most common case; but if it wasn't, the result is not great.
Specifically, if the old wrap width was smaller, some hard line breaks just
won't be removed; if it was wider though, you'll get an unpleasant comb effect
with alternating long and short lines. In such a case it's best to switch to the
editor and use whatever wrapping features you have there (e.g. alt-Q).
