The secondary pane showed the custom patch with a bespoke in-memory render
(PatchBuilder.RenderAggregatedPatch / FormatView). That had two problems: it
could never be fed to a pager the way the main view's diff is (a stdin pager
might have worked, but an external diff tool like difftastic, which diffs two
files rather than a unified diff, could not), and its hand-rolled hunk/context
handling differed subtly from git's.
Materialize the patch instead as two real file trees under a temp dir — a/ holds
each patched file's "from"-side content, b/ that content with the patch applied —
and render it with `git diff --no-index`, reusing the exact pager wiring the main
view uses (stdin pager, external diff, or git's own colour as the raw fallback).
`--no-index` honors both GIT_PAGER and --ext-diff, so every pager type now renders
the custom patch like any other diff, and git computes the context, fixing the
quirks. Because the secondary is now an async diff task, the post-removal
selection reveal (which rides a task's restore) finally takes effect.
The trees are named a/b so that with --no-prefix the diff shows the real
repo-relative paths; added files are seeded empty in a/ so they pair up and show
their real paths rather than git's directory-comparison "added in b" form. The
patch builder owns the temp dir's lifetime (created on Start, removed on Reset)
and bumps a generation counter on every change, so the trees are rebuilt only
when the patch actually changes — covering the focused-main view and the old
explorer alike, without rebuilding on mere navigation.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The focused-main-view rework made the secondary pane actionable, but the old
patch-building explorer's secondary was inert, so its actions were never thought
through. Pressing space there routed through the same toggle handler as the main
pane, resolving the selection against the secondary's diff and mapping it to
patch-builder indices by line number. But the secondary shows the *aggregated*
custom patch, which renumbers included additions whenever an earlier addition in
the same hunk is excluded (Transform recomputes each hunk's +start). So the
shifted number resolved to the wrong line in the original diff — often adding an
unrelated line instead of removing the selected one.
Resolve the secondary selection by its *ordinal* among the change lines shown
instead: the custom-patch view renders exactly the included change lines in
order, so the k-th change line of a file is that file's k-th included change line
(PatchBuilder.IncludedChangeLineIndices), independent of the renumbering. Space
in the secondary now only ever removes, mirroring how space in the staging view's
staged pane unstages.
Discarding from the commit (the remove key) makes no sense in the custom-patch
preview — it would act on lines shown only as the patch, and space already
removes them — so it's disabled there.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The patch builder works in patch-line-index space, which the patch
explorer can supply directly from its parsed-patch state. The focused
main view can't: it only knows a selection as diff-line metadata
identities (file line number + deletion?), and those indices differ
between the raw diff and however a pager renders it.
Add the conversion at the boundary so the main view stays in identity
space: PatchLineIndicesForLines maps identities to indices (for
toggling) and IncludedLineIdentities reports the included change lines
as identities (for the inclusion gutter to match rendered rows against).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The custom-patch git operations (move/pull/delete patch, and their rebase
continuations) run on worker goroutines and call PatchBuilder.Reset when
they've consumed the patch, clearing To and the fileInfoMap. Meanwhile the
UI thread reads that state every layout — the options bar and the mode
indicator both call Active() — so the reset raced the render.
Add a mutex. The map's entries are only ever touched on the UI thread, so
the lock only has to serialize the To field and the fileInfoMap pointer:
readers snapshot the pointer under the lock and iterate the local, and
getFileInfo drops the lock across its git diff I/O rather than holding it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When loading the files of a commit we passed --no-renames, so a rename
showed up as a separate delete and add rather than a single R entry.
That made it impossible to work with a rename that also modifies the
file: the modifications were spread across a full deletion and a full
addition instead of appearing as the handful of lines that actually
changed. The staging view already shows renames and lets you stage
their hunks, so there was no good reason for the patch builder to
differ; the flag was only there because the commit-file parser couldn't
cope with the rename record format.
Switch the commit-file loader and the per-file diff to --find-renames,
teach the parser about the rename record (a status followed by two
paths), and carry the previous path through the patch builder so the
diff for a rename is loaded with both paths, which is what makes git
emit the rename in the first place.
A whole-file selection keeps the rename in the header, so the rename
moves or is discarded together with the file's contents. A partial
selection instead strips the rename metadata and points the header at
the new path, so applying the patch only changes the contents and
leaves the rename in place; the blob index line is kept so that a 3-way
apply can still fall back to a blob merge.
Discarding a renamed file from a commit now discards both the new and
the old path, so the new file is removed and the old one is restored.
Changing the rename similarity threshold refreshes the commit files
panel too, not just the files panel, so that a rename can turn into a
delete and add or back. It is disabled while building a patch, however,
because the patch builder caches each file's diff by path and would
desync if a rename changed into a delete and add underneath it.
Finally, copying a file's diff from the commit files panel now passes
both paths for a rename, so the copied diff shows the rename instead of
a new-file add.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This improves the experience when selecting a hunk generously with the mouse, by
dragging over it including some context lines above and below. Previously we
would consider the "moving end" of the selection range for whether things need
to be added or removed, but this doesn't make sense if it's a context line. Now
we consider the first actual change line that is included in the range.
I took the set of enabled checks from revive's recommended configuration [1],
and removed some that I didn't like. There might be other useful checks in
revive that we might want to enable, but this is a nice improvement already.
The bulk of the changes here are removing unnecessary else statements after
returns, but there are a few others too.
[1] https://github.com/mgechev/revive?tab=readme-ov-file#recommended-configuration
Several custom patch commands on parts of an added file would fail with the
confusing error message "error: new file XXX depends on old contents". These
were dropping the custom patch from the original commit, moving the patch to a
new commit, moving it to a later commit, or moving it to the index.
We fix this by converting the patch header from an added file to a diff against
an empty file. We do this not just for the purpose of applying the patch, but
also for rendering it and copying it to the clip board. I'm not sure it matters
much in these cases, but it does feel more correct for a filtered patch to be
presented this way.
We're going to add another argument in the next commit, and that's getting a bit
much, especially when most of the arguments are bool and you only see true and
false at the call sites without knowing what they mean.
We're not fully standardising here: different contexts can store their range state however
they like. What we are standardising on is that now the view is always responsible for
highlighting the selected lines, meaning the context/controller needs to tell the view
where the range start is.
Two convenient benefits from this change:
1) we no longer need bespoke code in integration tests for asserting on selected lines because
we can just ask the view
2) line selection in staging/patch-building/merge-conflicts views now look the same as in
list views i.e. the highlight applies to the whole line (including trailing space)
I also noticed a bug with merge conflicts not rendering the selection on focus though I suspect
it wasn't a bug with any real consequences when the view wasn't displaying the selection.
I'm going to scrap the selectedRangeBgColor config and just let it use the single line
background color. Hopefully nobody cares, but there's really no need for an extra config.
We've been sometimes using lo and sometimes using my slices package, and we need to pick one
for consistency. Lo is more extensive and better maintained so we're going with that.
My slices package was a superset of go's own slices package so in some places I've just used
the official one (the methods were just wrappers anyway).
I've also moved the remaining methods into the utils package.
