Use osCommand.GetTempDir() (lazygit's own per-session temp dir, which it
creates and cleans up) as the parent for the custom-patch diff trees, instead
of the OS default — so it honors the configured temp dir and is cleaned up with
the rest of lazygit's temp files.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The secondary pane showed the custom patch with a bespoke in-memory render
(PatchBuilder.RenderAggregatedPatch / FormatView). That had two problems: it
could never be fed to a pager the way the main view's diff is (a stdin pager
might have worked, but an external diff tool like difftastic, which diffs two
files rather than a unified diff, could not), and its hand-rolled hunk/context
handling differed subtly from git's.
Materialize the patch instead as two real file trees under a temp dir — a/ holds
each patched file's "from"-side content, b/ that content with the patch applied —
and render it with `git diff --no-index`, reusing the exact pager wiring the main
view uses (stdin pager, external diff, or git's own colour as the raw fallback).
`--no-index` honors both GIT_PAGER and --ext-diff, so every pager type now renders
the custom patch like any other diff, and git computes the context, fixing the
quirks. Because the secondary is now an async diff task, the post-removal
selection reveal (which rides a task's restore) finally takes effect.
The trees are named a/b so that with --no-prefix the diff shows the real
repo-relative paths; added files are seeded empty in a/ so they pair up and show
their real paths rather than git's directory-comparison "added in b" form. The
patch builder owns the temp dir's lifetime (created on Start, removed on Reset)
and bumps a generation counter on every change, so the trees are rebuilt only
when the patch actually changes — covering the focused-main view and the old
explorer alike, without rebuilding on mere navigation.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
git finds a repo by looking for a .git in the directory a command runs
in. Lazygit runs its commands in the work tree, so that normally works —
but not when the git dir lives somewhere else entirely, which is what
core.worktree and --work-tree are for. Lazygit chdir'd into such a work
tree and then ran commands that couldn't see any repo from there, so
opening a repo with core.worktree set panicked on startup. It only
worked with --git-dir because that leaves GIT_DIR in the environment for
every command to inherit.
Work out at startup whether git can find the repo from its work tree,
and when it can't, put GIT_DIR and GIT_WORK_TREE on every command the
repo's builder produces. As with the working directory the builder pins
(527124d0e0), these also go into the process env — subprocesses don't
come through the builder — but the commands don't read them from there,
because the process env belongs to whichever repo we have switched to
since.
Working out whether git can find the repo means asking git, rather than
reading the .git file, whose contents can spell the same directory
differently than git does. The extra query is skipped for a repo whose
git dir is simply its .git directory, which is nearly all of them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
git makes `rev-parse --show-toplevel` fatal when there's no work tree,
so asking for it together with everything else meant we never got an
answer at all for a bare repo: GetRepoPaths returned an error, nobody
ever saw IsBareRepo() == true, and lazygit either died with a stack
trace or decided we weren't in a repository. That's what you got for
opening it in a directory holding a bare repo and a .git file pointing
at it, which is a normal way to keep a repo and its worktrees together.
Ask again without --show-toplevel when the first query fails: the other
queries work fine without a work tree, so if they now succeed we know
we're in a bare repo, and the existing prompt offering to open a recent
repo does its job. If they fail too we're not in a repo at all, and the
first error already says so.
--is-bare-repository is gone from the query: a work tree implies
core.bare is false, so it could only ever come back false there, and
what matters to us is whether there is a work tree to show, which is
what we now go by.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
For a long time lazygit has used the term "custom pager" to refer to
what's really a "diff renderer". A pager is a program that allows you to
view output page by page (hence the name), e.g. less; lazygit's custom
diff renderers are not pagers. It used the term only because the feature
is implemented using git's GIT_PAGER env var, but that's an
implementation detail.
Rename the 'git.pagers' config to 'git.diffRenderers', and restructure
its elements while we're at it to make things clearer:
- Add a 'type' field to explicitly specify which type of diff renderer
it is (the two fundamentally different ones are 'stdinFilter' and
'extDiff').
- Add a third type, 'rawGit', which has an 'args' field that makes it
easy to use 'git --color-words' as a custom renderer
- Unify the old 'pager' and 'externalDiffCommand' fields to a single
'command' field for both types
Existing config files are migrated automatically.
The cached git config runs its `git config` reads through raw
exec.Command calls, outside the pinned git command builder, so they
followed the process working directory. A cache miss on a stale
instance — one still in use by a refresh that crossed a repo switch —
would therefore read the new repo's local config while computing data
for the old one. Give the cache a directory, set once by NewGitCommand
right after it determines the repo paths (the object is created fresh
for every repo switch, so no cross-repo cache invalidation is needed),
and run every config command there.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Lazygit changes the process working directory when switching repos, but
work that is still in flight for the previous repo can keep spawning
git commands after the switch — most notably a background refresh. Its
model writes are already dropped by the repo generation guard, but its
git commands would now run against the new repo. That is wasted work at
best; at worst it surfaces spurious error popups (the behind-base-
branch computation failing with "no such ref" when the old repo's main
branch doesn't exist in the new one) and pollutes caches belonging to
the old repo's reusable state (e.g. MainBranches' existing-branches
cache), which the user sees when switching back.
Give the git command builder the directory of the repo it was created
for, and pin every command it produces to that directory. The pinned
directory and the process cwd are identical until a switch happens
(NewGitCommand chdirs to the worktree path right before creating the
builder), so nothing changes in the steady state; the pin only takes
effect for commands built through a previous repo's GitCommand instance
after a switch, which now keep addressing the repo they were built for.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
When loading the files of a commit we passed --no-renames, so a rename
showed up as a separate delete and add rather than a single R entry.
That made it impossible to work with a rename that also modifies the
file: the modifications were spread across a full deletion and a full
addition instead of appearing as the handful of lines that actually
changed. The staging view already shows renames and lets you stage
their hunks, so there was no good reason for the patch builder to
differ; the flag was only there because the commit-file parser couldn't
cope with the rename record format.
Switch the commit-file loader and the per-file diff to --find-renames,
teach the parser about the rename record (a status followed by two
paths), and carry the previous path through the patch builder so the
diff for a rename is loaded with both paths, which is what makes git
emit the rename in the first place.
A whole-file selection keeps the rename in the header, so the rename
moves or is discarded together with the file's contents. A partial
selection instead strips the rename metadata and points the header at
the new path, so applying the patch only changes the contents and
leaves the rename in place; the blob index line is kept so that a 3-way
apply can still fall back to a blob merge.
Discarding a renamed file from a commit now discards both the new and
the old path, so the new file is removed and the old one is restored.
Changing the rename similarity threshold refreshes the commit files
panel too, not just the files panel, so that a rename can turn into a
delete and add or back. It is disabled while building a patch, however,
because the patch builder caches each file's diff by path and would
desync if a rename changed into a delete and add underneath it.
Finally, copying a file's diff from the commit files panel now passes
both paths for a rename, so the copied diff shows the rename instead of
a new-file add.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add GitHubCommands struct with GraphQL-based PR fetching, and
GithubPullRequest model. Wire HostingService and GitHub command
structs into GitCommand.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
This is an object that is owned by Gui, is accessible through GuiCommon.State(),
and also passed down to GitCommand, where it is mostly needed. Right now it
simply wraps access to the Git.Paging config, which isn't very exciting, but
we'll extend it in the next commit to handle a slice of pagers (and maintain the
currently selected pager index), and doing this refactoring up front allows us
to make that change without having to touch clients.
In a triangular workflow the branch that you're pulling from is not the same as
the one that you are pushing to. For example, some people find it useful to set
the upstream branch to origin/master so that pulling effectively rebases onto
master, and set the push.default git config to "current" so that "feature"
pushes to origin/feature.
Another example is a fork-based workflow where "feature" has upstream set to
upstream/main, and the repo has remote.pushDefault set to "origin", so pushing
on "feature" pushes to origin/feature.
This commit adds new fields to models.Branch that store the ahead/behind
information against the push branch; for the "normal" workflow where you pull
and push from/to the upstream branch, AheadForPush/BehindForPush will be the
same as AheadForPull/BehindForPull.
This changes GetRepoPaths() to pull information from `git rev-parse`
instead of effectively reimplementing git's logic for pathfinding. This
change fixes issues with bare repos, esp. versioned homedir use cases,
by aligning lazygit's path handling to what git itself does.
This change also enables lazygit to run from arbitrary subdirectories of
a repository, including correct handling of symlinks, including "deep"
symlinks into a repo, worktree, a repo's submodules, etc.
Integration tests are now resilient against unintended side effects from
the host's environment variables. Of necessity, $PATH and $TERM are the
only env vars allowed through now.
Afero is a package that lets you mock out a filesystem with an in-memory filesystem.
It allows us to easily create the files required for a given test without worrying about
a cleanup step or different tests tripping on eachother when run in parallel.
Later on I'll standardise on using afero over the vanilla os package
There are quite a few paths you might want to get e.g. the repo's path, the worktree's path,
the repo's git dir path, the worktree's git dir path. I want these all obtained once and
then used when needed rather than having to have IO whenever we need them. This is not so
much about reducing time spent on IO as it is about not having to care about errors every time
we want a path.
By constructing an arg vector manually, we no longer need to quote arguments
Mandate that args must be passed when building a command
Now you need to provide an args array when building a command.
There are a handful of places where we need to deal with a string,
such as with user-defined custom commands, and for those we now require
that at the callsite they use str.ToArgv to do that. I don't want
to provide a method out of the box for it because I want to discourage its
use.
For some reason we were invoking a command through a shell when amending a
commit, and I don't believe we needed to do that as there was nothing user-
supplied about the command. So I've switched to using a regular command out-
side the shell there
It defaults to {"master", "main"}, but can be set to whatever branch names
are used as base branches, e.g. {"master", "devel", "v1.0-hotfixes"}. It is
used for color-coding the shas in the commit list, i.e. to decide whether
commits are green or yellow.
test: add an integration test for checkout branch by name
fix: fix full ref name of detached head
refactor: refactor current branch loader
chore: use field name explicitly
more
and more
move rebase commit refreshing into existing abstraction
and more
and more
WIP
and more
handling clicks
properly fix merge conflicts
update cheatsheet
lots more preparation to start moving things into controllers
WIP
better typing
expand on remotes controller
moving more code into controllers
