# Focused main view — session notes > **⚠️ THIS BRANCH (`use-delta-hyperlinks-for-clicking-in-diff`) IS A THROWAWAY > PROTOTYPE.** It will never land. When we productionize, we start over from > scratch on a new branch and re-implement cleanly with tests. So **do not sweat > the commit history here**: no need for fixups against the right commit, no > squashing, no avoiding "added then reworked" churn, no agonizing over superseded > commits. Just commit working, green increments as you go. (The general > [[clean-history-no-back-and-forth]] preference is *suspended* for this branch; > it applies again when productionizing.) Commits should still compile and pass > tests — that's it. The value of this branch is the *knowledge* captured in this > doc, not the code or its history. A working document capturing everything we discussed, built, and learned in this session. It is meant as a **starting point for future sessions**, which might: 1. **Continue** solving the problem we were in the middle of (restoring scroll + selection when escaping back to a focused main view) — still at prototype quality. 2. **Enhance** the prototype with a few more missing pieces. 3. **Productionize** the whole thing: better quality, a clean commit history, and tests. (We did *not* make that plan; this doc gives a future session enough context to make it.) > Status at end of **session 3** (the latest): branch > `use-delta-hyperlinks-for-clicking-in-diff`. The escape scroll/selection > restore is **implemented and committed** — at normal speed there is **no > visible flicker**. Session 3 implemented §6's proposed fix (a cmd/pty analogue > of `RenderStringWithScrollTask`), discovered and fixed a *second* cause of the > top-flicker (the scroll-reset loop in `refreshMainViews` ran *before* > `CopyContent`), and corrected session 2's belief that the `onNewKey` > suppression could be dropped (it can't — it's folded into the same mechanism). > Full story in the new **§11**, which supersedes §6's "correct fix" subsection. > The working tree is now **clean** (everything committed); the tree builds, is > `gofumpt`-clean, unit tests pass, and `e2e-all` is green except one > pre-existing **direnv-environmental** worktree test. > > **What's left before productionizing:** under `LAZYGIT_SLOW_RENDER` a few > imperfect intermediate frames still appear *occasionally* — real timing races > we agreed to investigate and eliminate (not paper over with "fine at normal > speed"). See §11 "Remaining timing races". Memory: > `focused-main-view-flicker-timing-races`. --- ## 1. The big picture: what this feature is lazygit has a "focused main view": you press `0` (`Universal.FocusMainView`), or click, to move focus from a side panel (files, commits, commit-files, stash, branches, …) **into the main view** that shows its diff, so you can scroll and interact with the diff itself. The branch builds this out into a real interaction model: - A **selection** can be shown in the focused main view (a highlighted line), toggled on demand. - With a selection showing you can: - **`enter` / double-click** → dive into staging (files) or patch building (commits / commit-files) **for the clicked line**. - **`e`** → edit that line in your editor (like the staging view's `e`). - **`G`** → open the selected line in the current branch's GitHub PR diff (so you can comment on it). - **Clicking** sets the selection at the clicked line; **double-click** activates (dives in). `0` focuses *without* a selection (scroll mode). This all relies on `delta` emitting `lazygit-edit://:` OSC-8 hyperlinks in the rendered diff (hence the branch name); lazygit parses those to know which file/line a view line corresponds to. --- ## 2. Branch state Branch: `use-delta-hyperlinks-for-clicking-in-diff` (off lazygit master). **The working tree is clean — everything is committed.** The branch was **rebased** in session 3 (SHAs below are current): the `LAZYGIT_SLOW_RENDER` knob was moved to the **base** of the branch (so it can be tested against master), and the `SetOriginX/Y` chokepoint refactor was squashed into one commit. ### Current commit list (most recent first), `master..HEAD`: ``` 625e7dbad Restore scroll and selection seamlessly when escaping to a focused main view ← session 3 054d139fe Let a cmd/pty task restore a saved scroll position at its first paint ← session 3 7f547a5a3 Reset other main views' scroll after copying content, not before ← session 3 fe79d18b6 Route all view origin writes through SetOriginX and SetOriginY ← session 3 (chokepoint refactor; candidate for master) 89e6f6b14 Session notes: corrected flicker diagnosis and the 3 bug fixes 86f4b3486 Fire queued ReadToEnd callbacks when the initial read reaches EOF ← session 2 bug fix b7470af27 Don't scroll a view up to fill blank space while its content is loading ← session 2 bug fix 788d959ad Lock the view and guard the line index when reading a hyperlink ← session 2 bug fix 63221c3dd Session notes 5f500893a WIP FocusedMainViewSnapshot approach ← WIP (needs rework) 207927e0d WIP New click behavior ← WIP (needs rework) 385d2e9dd Open a browser at the selected line in the diff of the current branch's PR c5dd8ddc6 Press `e` in focused main view (when selection is showing) to edit that line 55922f81a Replace gui.showSelectionInFocusedMainView config with on-demand selection 877812c6a WIP After going straight to patch building from main view, esc goes all the way back out ← WIP (needs rework) 0088f26c1 Press enter in main view of commits panel to enter patch building for clicked line ec50f3122 Extract some functions from CommitFilesController to a new CommitFilesHelper ed2015cac Press enter in main view of files/commitFiles to enter staging/patch-building 1e5f31dd6 Select line that is in the middle of the screen fff7a0d19 Press enter in focused main view when user config is on 8a26bebbb Add user config gui.showSelectionInFocusedMainView ed48988a9 Add LAZYGIT_SLOW_RENDER debug knob for watching async render frames ← base; candidate for master ``` The three **`WIP`** commits and the heavily-iterated `FocusedMainViewSnapshot` machinery will need re-sequencing for productionization (see §8). The two clearly-standalone, master-worthy commits (`ed48988a9` slow-render at the base, `fe79d18b6` the `SetOriginX/Y` chokepoint) are deliberately isolated so they can be cherry-picked off. --- ## 3. Architecture primer (what we learned about lazygit internals) ### Contexts, the stack, and `NextInStack` - Each panel/view is a **context**. The `ContextMgr` keeps a **stack** (`pkg/gui/context.go`). `Push`/`Pop` manage it. Kinds: `SIDE_CONTEXT`, `MAIN_CONTEXT`, popups, etc. - Pushing a `SIDE_CONTEXT` **wipes the stack** down to just it. Pushing a `MAIN_CONTEXT` **evicts other main contexts** but keeps non-main ones beneath. Only **one main context** is ever on the stack at a time. - A focused main view's "side panel" is found via **`ContextMgr.NextInStack(ctx)`** — the entry just below it on the stack. This was introduced on master in commit `bbd17abc43a` ("Add ContextMgr.NextInStack…") specifically to **stop abusing the parent-context mechanism** for this. Earlier prototype code on this branch assumed the focused main view's *parent context* was its side panel; that assumption is gone now — use `NextInStack`. (Memory: `worktree-path-vs-repo-path` is unrelated; this is a different gotcha.) ### The focused main view contexts vs. the patch-explorer contexts `pkg/gui/context/setup.go`: - `Normal` → `Main` view, window `"main"`; `NormalSecondary` → `Secondary` view, window `"secondary"`. These are `MainContext` (a `SimpleContext`). **This is the focused main view.** - `Staging` → `Staging` view, window `"main"`; `StagingSecondary` → `StagingSecondary` view, window `"secondary"`; `CustomPatchBuilder` → `PatchBuilding` view, window `"main"`. These are `PatchExplorerContext` (also `MAIN_CONTEXT`). - **Crucial:** `Normal` and `Staging`/`CustomPatchBuilder` share the same *window* but are **separate gocui views**. Only one view per window is shown at a time; the others are hidden **but retain their buffer (content, scroll, selection)**. So entering staging *hides* the `Main` view rather than overwriting it — its scroll/selection survive **unless something explicitly re-renders the `Main` view** (see "the clobber" below). ### Dispatch: `GetOnClickFocusedMainView` - Controllers expose `GetOnClickFocusedMainView() func(mainViewName string, clickedLineIdx int) error`. - `pkg/gui/controllers/attach.go` registers it on the context (`AddOnClickFocusedMainViewFn`). - `MainViewController.enterForLine` / `onClickInAlreadyFocusedView` call `NextInStack(self.context).GetOnClickFocusedMainView()(viewName, lineIdx)`. - Implementers: `FilesController` (→ staging), `CommitFilesController` (→ patch building), `SwitchToDiffFilesController` (commits/stash → patch building). - The line/file is resolved from the `lazygit-edit://` hyperlink via `StagingHelper.GetFileAndLineForClickedDiffLine(viewName, lineIdx)` — this reads the hyperlink on the given **view line** (so it accounts for wrapping) and parses `lazygit-edit://:`. ### The async render-task system (`pkg/tasks/tasks.go`) — the crux of our blocker Rendering a diff into a view is **asynchronous** and **lazy**: - A view has a `ViewBufferManager`. `RenderToMainViews` → a **cmd task** keyed on the **command string**. - The initial render reads only **`linesToReadFromCmdTask(view)` lines (one screenful, ~37)**, then the task **waits** on its `readLines` channel for more (e.g. when you scroll down, `ViewSelectionController` requests more). - `ViewBufferManager.ReadToEnd(then)` sends `{Total:-1, Then:then}` to `readLines`; the loop reads to EOF, runs `onEndOfInput`, then calls `then`. **But** if `self.readLines == nil` (no live task), `ReadToEnd` calls `then()` **immediately/synchronously** — this is a premature-fire trap. - A task's `readLines` is created **inside the task goroutine** (async), so right after `Push`/render the channel may not exist yet. - `onNewKey` (`view.SetOrigin(0,0)`) runs at task start **iff the key changed**. Same command/key ⇒ origin preserved; different key ⇒ origin reset to top. - `view.Reset()` (beforeStart) rewinds the write pointer; it does **not** reset origin. `onEndOfInput` clamps origin if the new content is shorter. - `MainViewController.openSearch` is the existing precedent that uses `GetViewBufferManagerForView(view).ReadToEnd(func(){ OnUIThread(...) })` — but it does so on a view that's **already focused with a live task**, which is exactly the precondition we keep failing to establish. ### Gocui view bits we used - `view.OriginY()` / `view.SetOrigin(x,y)` — scroll. `SetOrigin` clamps `<0` only (not to content length). - `view.SelectedLineIdx()` = `OriginY + CursorY` (absolute view-line). - `view.FocusPoint(cx, cy, scrollIntoView)` — sets cursor to absolute `cy` (`v.cy = cy - v.oy`); with `scrollIntoView` it adjusts origin via `calculateNewOrigin`. **Returns early if `cy < 0 || cy > lineCount`** — so it silently no-ops if the content isn't loaded that far. (This is why a deep selection "doesn't take" when only a screenful is loaded.) - `view.Highlight` / `view.HighlightInactive` — whether/how the selection is drawn. `SimpleContext.HandleFocusLost` sets `Highlight=false` (so the focused-main selection is cleared whenever the view loses focus). We added `MainViewController.GetOnFocus` to reset `HighlightInactive=false` on the way back in. --- ## 4. The decided UX (don't relitigate without reason) - **Click = point at a line ⇒ select it.** Single-click sets/moves the selection to the clicked line and does nothing else. **Double-click** = the "activate/open" gesture ⇒ dive into staging/patch building for that line. Clicking an unfocused view focuses **and** selects (one click → ready for `e`/`G`/enter). `0` focuses with **no** selection (scroll mode) — because it doesn't point at a line. - **Escape from staging/patch-building should return to the focused main view you came from**, showing the **same main-view content** again (fresh, not stale), with the **same scroll position and selection**, and with the **main view focused** (not the side panel). One `enter` in → one `esc` out. - For commits/stash, "the same content" means the **whole-commit diff** you were looking at — **not** a different focused main view (e.g. not the commit-files file diff). Landing on a *different* focused main view was explicitly rejected. - "Stale content is out of the question" — when the underlying file changed (e.g. after staging), the returned main view must re-render fresh. (We accept that the selection may then be slightly off, since the diff changed — no fix planned.) ### Keybindings (focused main view, when a selection is showing) In `MainViewController.GetKeybindings`: `Universal.Select` (space) toggles selection; `Universal.GoInto` (enter) dives in; `Universal.Edit` (`e`) edits; `Commits.OpenPullRequestInBrowser` (`G`) opens the PR line; `Universal.Return` (esc) hides selection / exits. `<`/`>` are goto top/bottom (so `G` is free). --- ## 5. The GitHub PR-line feature (working, committed `77157c5ad`) `MainViewController.openPullRequestForSelectedLine`: - URL form: `/changes/#diff-R`. - `` = `DiffableContext.RefForAdjustingLineNumberInDiff()` of the side panel (selected commit / the commit-files "to" ref). Using the specific commit's view means the right-side line numbers match what's shown, so **no `AdjustLineNumber` needed** here (unlike `e`). - `relPath` = repo-relative path via `filepath.Rel(RepoPaths.WorktreePath(), abs)` then `filepath.ToSlash`. **The anchor is `sha256(relPath)` — exact bytes, forward slashes, original case, no trailing newline.** (Verified empirically; the `#diff-…` hash is SHA-256 of the new-file path. `R` = right/new side; `L` = left/old.) - Branch resolution (`branchForPullRequest`): `commits` → `CheckedOutBranch`; `subCommits` → `SubCommits.GetRef().RefName()`; `commitFiles` → recurse into its parent context. GitHub-only (driven by `Model().PullRequestsMap`). ### GOTCHA recorded to memory `WorktreePath()` vs `RepoPath()`: to make a working-tree path repo-relative use `RepoPaths.WorktreePath()`, **not** `RepoPath()` — they differ in **linked worktrees** (this dev setup uses `.worktrees/scratch`), and `RepoPath()` silently produced the wrong relative path → wrong `sha256` anchor. See memory `worktree-path-vs-repo-path`. --- ## 6. THE IN-PROGRESS PROBLEM (where to resume) **Goal:** escaping staging/patch building that was entered from a focused main view should return to that focused main view, fresh content, **scroll + selection restored**, main view focused. ### The mechanism (now committed + a little still uncommitted) - `types.FocusedMainViewSnapshot { SidePanel, SidePanelSelectedLineIdx, MainView, OriginY, SelectedLineIdx }` (`pkg/gui/types/context.go`). - Stored on `PatchExplorerContext.focusedMainViewSnapshot` (`nil` ⇒ entered the normal way ⇒ plain `Pop()`), captured at entry in `focusedMainViewSnapshot(…)` (`main_view_controller.go`), threaded through `FilesController.EnterFile` / `CommitFilesHelper.EnterCommitFile`. All of this is committed in `d901a9711`. - **Escape**: `helpers.EscapeFromPatchExplorer(c, ctx)` restores the side panel's selection, `Push(SidePanel)`, `Push(MainView)`, then restores origin + selection. The current version of this (the `ReadToEnd`-based restore plus the `keepOrigin` machinery below) is the **uncommitted** part left in the working tree — it's WIP because the flicker isn't fully solved. ### Where session 2 landed: the flicker is fully diagnosed; 3 bug fixes committed Restoring scroll + selection on escape **works** (the final state is correct). What remained was a **flicker on the way in**: a brief intermediate frame before the view settles at the saved position. Chasing it uncovered three genuine, independent bugs (all now committed on top of `e5326c3a6`): 1. **`6c7d9a295` Lock the view + guard the line index in `HyperLinkInLine`.** It read `v.lines`/`v.viewLines` with no `writeMutex`, racing a concurrent re-render, and indexed `v.lines[viewLines[y].linesY]` after only checking `y` against `len(viewLines)`. Because `refreshViewLinesIfNeeded` overwrites `viewLines` *in place without truncating*, the tail keeps stale entries whose `linesY` points past a shrunk `v.lines` → out-of-range panic on `enter` while a shorter diff was still loading. 2. **`3b31cfe01` Don't scroll a view up to fill blank space while loading.** The layout's scroll-up clamp ([`layout.go`], added in `6114f69ee5ef`) clamps a view's origin to `TotalContentHeight()` — which for a main view is just the **lines loaded so far**. During an async re-render that's a fraction of the eventual content, so it yanked the view to the top. Fix: a synchronously-set `ViewBufferManager.loading` flag (set in the cmd/pty wrappers *before* the layout pass, cleared at EOF but **not** on stop), and the layout skips the clamp while loading. 3. **`a4b72a6f6` Fire queued `ReadToEnd` callbacks when the initial read hits EOF.** The read loop processes one request at a time; the initial request has no `Then` and a large line count, so if the content is shorter it hits EOF on that request and `break`s out, abandoning any queued `ReadToEnd` request in the channel → its `Then` silently dropped (this was session 1's "ReadToEnd's `then` never fired" mystery!). Fix: drain queued requests and fire their `Then`s on EOF. ### Corrected diagnosis (session 1's §6 diagnosis was WRONG in its mechanism) Session 1 said "on restore only the initial screenful (`height=37`) is loaded, so `FocusPoint` returns early." **That was inaccurate.** The truth, confirmed by instrumenting **every** write to the main view's `oy` (see Debug tooling §10): - `linesToReadFromCmdTask` reads `height*(height-1)+oy` lines (≈1332+, capped at 5000) — **not** one screenful. For typical diffs the whole thing loads quickly. - The scroll wasn't failing because content was unloaded at *restore* time (the `ReadToEnd` restore, once the drain fix above made it fire, sets the final position correctly). It was failing because the **layout clamp** (bug #2) was resetting `oy` to 0 on *every layout pass* during the async load, until the content caught up. That is the real cause of "scroll resets to the top." ### The full origin-reset chain on escape (and how each is handled now) Tracing every `oy` write during a commits-scrolled-down escape, three different things were all moving the origin off the saved value: 1. **`onNewKey`** (`tasks_adapter.go`) resets `oy` to 0 when the re-render's command key differs from the last one (it does, because the commit-files render clobbered the main view on entry). → handled by `ViewBufferManager.KeepOriginForNextTask()` (uncommitted feature machinery), which suppresses that one reset. 2. **`CopyContent`** (`view.go`, via `moveMainContextToTop`) copies the *previous top view's* buffer **and origin** into the main view to avoid a blank frame. → handled by re-asserting `SetOrigin(saved)` after the pushes. 3. **The layout scroll-up clamp** → handled by bug fix #2 (the `loading` flag). ### The one remaining flicker (and the correct fix — IMPLEMENTED in session 3, see §11) > **Update (session 3):** the fix described below was implemented, but the > diagnosis here was *incomplete* in two ways that §11 corrects: (a) the > `onNewKey` suppression could **not** be dropped, and (b) there was a **second** > source of the top-flicker — the scroll-reset loop in `refreshMainViews`. Read > §11 as the current truth; the text below is session 2's understanding. With all three handled, the *scroll no longer jumps*. But there's still a brief intermediate frame, and we found exactly what it is: **`CopyContent` seeds the main view with the patch-building view's buffer**, and since we set the origin to the saved position (far down) while that placeholder is shorter, the draw shows the placeholder's *last line* at the top with blank below — until the pty task finishes loading the real diff and repaints at the saved position. (It "appears scrolled up by a varying amount" purely because what shows at the saved `oy` depends on the patch's *length*, via `min(oy, patchLines-1)`.) **NOTE — a rejected red herring:** "avoid clobbering the main view on entry" does **not** fix this. `CopyContent` overwrites the main view's buffer regardless of what was there, so preserving the original commit diff on entry wouldn't change the placeholder frame. **The correct fix (user's conclusion, agreed):** we're applying the saved origin *too early*. It must be applied *exactly* when the pty task does its first repaint (when it has read enough to fill the view at the saved scroll). The catch: `InitialRefreshAfter` — which decides *when* that first repaint happens — is computed from the view's `OriginY` **at task-creation time**. So the target origin must be known at creation (so the task reads enough), but the view must keep showing the placeholder until that first paint, and only snap to the saved position *as part of* that paint. Concretely: **a cmd/pty analogue of `RenderStringWithScrollTask`** — "render this command and scroll to Y once you've read enough" — applying the origin at the `InitialRefreshAfter` refresh rather than up front. This is the concrete next step; it's bounded but real work, and likely lets us drop the `keepOrigin` + after-push `SetOrigin` machinery (they'd be subsumed by the task setting the origin itself). --- ## 7. Prototype enhancements still missing (for an "enhance" session) - **Directory case follow-up:** entering staging from a files/commit-files **directory** selection expands the tree and changes the selection to the clicked file. We restore the side panel's selected line on exit (`SidePanelSelectedLineIdx`) so the main view shows the directory's combined diff again — but we **don't restore the tree's expanded/collapsed state**, so the panel comes back more expanded than it was. Decide whether to restore that too. Also, the directory case shares the scroll/selection-restore bug above. - **`onClickInOtherViewOfMainViewPair`** (clicking the other pane of a main view pair) now also selects + double-click-stages for consistency; double-check this is desired and that the secondary-pane paths behave. - **Stale selection after stage/unstage:** explicitly accepted as out of scope; no fix planned. - **No integration tests** exist for any of the focused-main-view interactions (click/double-click/`enter`/`e`/`G`/escape-restore). They were skipped on purpose during prototyping. --- ## 8. Productionization notes (for a future planning session — do NOT plan yet) Context a planning session will need: - **Commit history needs rework.** Two `WIP` commits (`673b90c10` "esc goes all the way back out", `30e625a8d` "New click behavior") plus the large uncommitted escape/restore change. AGENTS.md (this repo) mandates: small, self-contained, compiling, `gofumpt`-clean commits; "why not what" messages; prep-refactors split from behavior changes; `fixup!`/`amend!` against the right commit and `git rebase --autosquash`; no conventional-commit prefixes. The escape/restore work especially will want to be re-sequenced into clean commits (and the `escapeContext` → `FocusedMainViewSnapshot` evolution collapsed, since it was iterated heavily). - **Demonstrate-bugs-before-fixing** pattern (AGENTS.md) with `EXPECTED`/`ACTUAL` — relevant if any of this lands as bug-fix-shaped commits. - **Tests:** integration tests live under `pkg/integration/tests/...`; conventions in AGENTS.md (chain `t.Views().()` fluently, no local view vars; use `stretchr/testify`). A unit-testable seam worth noting: the scroll/selection restore and the GitHub-anchor URL builder (`githubPullRequestLineURL`) are pure-ish and could be unit-tested; the patch index↔view line wrapping logic lives in `pkg/gui/patch_exploring/state.go`. - **Config:** `gui.showSelectionInFocusedMainView` was added then **removed** (`c4aba31c9`) in favor of on-demand selection — don't reintroduce a config toggle for this without reason. - **Commands:** use the `justfile` recipes (`just generate` regenerates the test list + cheatsheets and CI fails if stale; `just format`, `just build`, `just unit-test`, `just e2e-all`, `just lint`). Prefer `just` over `make`. Adding/renaming a keybinding ⇒ run `just generate` and commit the result (note: gated descriptions — the focused-main bindings use empty descriptions when no selection is shown, so they don't appear in cheatsheets, matching the existing `enter` binding). - The unrelated `M AGENTS.md` in the working tree is the "Common commands" section documenting `just` — keep or commit separately. --- ## 9. Key files (quick map) - `pkg/gui/controllers/main_view_controller.go` — the focused main view controller: keybindings, `toggleSelection`, `enter`/`enterForLine`, `editLine`, `openPullRequestForSelectedLine`, `branchForPullRequest`, click handlers, `showSelectionAtLine`, `focusedMainViewContextForViewName`, `focusedMainViewSnapshot`, `githubPullRequestLineURL`. - `pkg/gui/controllers/switch_to_focused_main_view_controller.go` — focuses the main view from a side panel (`0` / click); click passes a line so it selects, `0` passes -1 so it doesn't. - `pkg/gui/controllers/switch_to_diff_files_controller.go` — commits/stash → patch building entry (`GetOnClickFocusedMainView`, `enter`). - `pkg/gui/controllers/files_controller.go` — files → staging entry (`GetOnClickFocusedMainView`, `EnterFile`). - `pkg/gui/controllers/commits_files_controller.go` — commit-files → patch building entry. - `pkg/gui/controllers/helpers/commit_files_helper.go` — `EnterCommitFile`. - `pkg/gui/controllers/helpers/patch_building_helper.go` — `Escape` + `EscapeFromPatchExplorer` (the shared escape/restore logic). - `pkg/gui/controllers/staging_controller.go` — `Escape` (calls `EscapeFromPatchExplorer`). - `pkg/gui/context/patch_explorer_context.go` — `FocusedMainViewSnapshot` storage. - `pkg/gui/types/context.go` — `FocusedMainViewSnapshot`, `IPatchExplorerContext` additions. - `pkg/gui/controllers/helpers/staging_helper.go` — `GetFileAndLineForClickedDiffLine` (hyperlink parsing). - `pkg/tasks/tasks.go` — the async render-task system (`ViewBufferManager`, `ReadToEnd`, the read loop). Session 3 added `ScrollToOriginYForNextTask` / `GetScrollToOriginYForNextTask`, `LinesToRead.ApplyInitialScroll`, the first-paint apply in the read loop, and the `onNewKey` suppression (§11). Also hosts the committed `LAZYGIT_SLOW_RENDER` knob. - `pkg/gui/tasks_adapter.go` + `pkg/gui/pty.go` — cmd/pty task wrappers; both now peek the manager's pending scroll and pass it to `linesToReadFromCmdTask(view, targetOriginY)` (`view_helpers.go`). - `pkg/gui/main_panels.go` — `refreshMainViews` (the scroll-reset loop, **now after** `moveMainContextPairToTop`, §11) and `moveMainContextToTop` → `CopyContent`. - `pkg/gui/layout.go` — the scroll-up-to-fill clamp (`setViewFromDimensions`); skipped while a view's task `IsLoading()`. - `pkg/gocui/view.go` — `SetOriginX`/`SetOriginY` are now the **single chokepoints** for all `ox`/`oy` writes (`fe79d18b6`); ideal breakpoint spot. --- ## 10. Debug tooling ### Slow down rendering (`LAZYGIT_SLOW_RENDER=`) — now COMMITTED This is no longer a paste-back snippet: it's committed at the **base** of the branch (`ed48988a9`). Sleeps `` after each line written to a view, so the frames of an async re-render become visible. No effect when unset. Run as `LAZYGIT_SLOW_RENDER=40 just debug` (with `just print-log` in another tab). **This is the tool that makes the remaining timing races (§11) visible** — they are essentially invisible at normal speed. ### Trace every change to a view's scroll position — now a single chokepoint Session 3's `SetOriginX`/`SetOriginY` refactor (`fe79d18b6`) routed **every** write to `v.oy`/`v.ox` through `SetOriginY`/`SetOriginX`. So you no longer need to scatter the tracer across `SetOrigin`/`CopyContent`/`FocusPoint`/`draw`/ `ScrollUp`/`ScrollDown` — **set one breakpoint (or one log line) inside `SetOriginY` in `pkg/gocui/view.go`** and you catch all of them, with the `bt`/Call-Stack giving the caller. (This is exactly how session 3 found the `refreshMainViews` reset-loop cause — see §11.) The old multi-site `debugMainOriginReset(v, newY)` helper still works if you want a `/tmp` log with a trimmed call stack; drop it into `SetOriginY` and filter by `v.name`: ```go func debugMainOriginReset(v *View, newY int) { if v.name != "main" || newY == v.oy { return } pc := make([]uintptr, 6) n := runtime.Callers(3, pc) frames := runtime.CallersFrames(pc[:n]) var b strings.Builder for i := 0; i < 4; i++ { fr, more := frames.Next() fmt.Fprintf(&b, " <- %s:%d", fr.File[strings.LastIndex(fr.File, "/")+1:], fr.Line) if !more { break } } if f, err := os.OpenFile("/tmp/fmvs_origin.log", os.O_CREATE|os.O_WRONLY|os.O_APPEND, 0o644); err == nil { fmt.Fprintf(f, "main oy %d->%d%s\n", v.oy, newY, b.String()) f.Close() } } ``` --- ## 11. Session 3: the flicker fix (implemented) + remaining timing races Session 3 turned §6's proposal into working, committed code, and corrected the diagnosis twice along the way. At **normal speed the escape is now flicker-free**. ### What "applying the saved scroll at first paint" became (commit `054d139fe`) The cmd/pty analogue of `RenderStringWithScrollTask`, driven by one field on `ViewBufferManager`: - **`ScrollToOriginYForNextTask(originY int)`** sets `scrollToOriginYForNextTask *int`. The escape calls it on the main view's manager **before** the re-render is triggered. It has *two* effects on the next cmd/pty task: 1. **Suppresses the start-of-task origin reset** (`onNewKey`) — so the `CopyContent` placeholder keeps showing at *its* scroll instead of being yanked to the top. (This is the part session 2 thought we could drop. We can't — see below.) 2. **Sizes the initial read to `originY`** (`linesToReadFromCmdTask(view, targetOriginY *int)` uses it instead of the view's current `OriginY`) **and scrolls there at the first refresh** via a new `LinesToRead.ApplyInitialScroll` callback, applied once (guarded by `sync.Once`) — at the `InitialRefreshAfter` point, and in the EOF branch *before* `onEndOfInput` (so a now-shorter diff gets clamped back into range). - The field is **peeked** (`GetScrollToOriginYForNextTask`) by the cmd/pty wrappers (`tasks_adapter.go`, `pty.go`) to size the read, and **cleared in `NewTask`** after the `onNewKey` decision — so it survives long enough to drive both effects, and applies to exactly one task. (Per-view managers, so the secondary view isn't affected.) - Behaviour-preserving until a caller sets it. ### Escape wiring simplified (commit `625e7dbad`) `EscapeFromPatchExplorer` now just calls `ScrollToOriginYForNextTask(snapshot.OriginY)` before the pushes, and restores the **selection only** (`FocusPoint` + highlight) via `ReadToEnd` once the diff is fully loaded. The session-2 dance — up-front `SetOrigin`, after-push `SetOrigin`, and `KeepOriginForNextTask` — is **gone**; the task owns the scroll now. ### Correction #1: `onNewKey` suppression could NOT be dropped §6 predicted the new mechanism would let us drop the `onNewKey` suppression. It didn't. `CopyContent`'s entire purpose is that the newly-revealed view keeps showing the previous view's content **at its scroll** ("as if nothing changed") until the real content paints. Letting `onNewKey` reset that to the top *is* a flicker. So the suppression is kept — folded into the same `scrollToOriginYForNextTask` field (effect #1 above) rather than a separate `keepOrigin` flag. ### Correction #2: there was a SECOND cause of the top-flicker — `refreshMainViews` (commit `7f547a5a3`) Even with `onNewKey` suppressed, the placeholder still flicked to the top under slow render. A `SetOriginY` breakpoint (trivial now, thanks to the chokepoint refactor) caught it: `refreshMainViews` (`main_panels.go`) reset the scroll of every *other* main view at the **top** of the function — i.e. it zeroed the patch-building view's origin **before** `moveMainContextPairToTop` → `CopyContent` copied that view (now at origin 0) into the Normal view. So the 0 came from the reset feeding `CopyContent`, *independent of* `onNewKey`. **Fix:** move the reset loop to **after** `moveMainContextPairToTop`. End state is unchanged (every other main still ends at 0, and the destination always re-renders), but `CopyContent` now copies the source at its real scroll, so the placeholder stays put. This also makes *every* cross-pair transition's placeholder seamless, not just our escape. ### Verification - `just build` / `just lint` / `just unit-test` all green. (`TestNewCmdTaskInstantStop` is a **pre-existing timing flake** that only trips under the full suite's parallel load; passes 10/10 in isolation, and the session-3 task changes are inert on its instant-stop path.) - `just e2e-all`: green **except** `worktree/associate_branch_rebase`, which fails *environmentally* — `cd`-ing into the linked worktree triggers lazygit's direnv integration to pop a "Press to run 'direnv allow'" confirmation (this checkout's `.envrc` is blocked), stealing focus from the `.Focus()` assertion. Run `direnv allow` (or confirm it fails the same on `master`). ### Remaining timing races (DO THIS before productionizing) At normal speed there's no visible flicker, but under `LAZYGIT_SLOW_RENDER` **occasional** imperfect intermediate frames remain. The user's explicit call: these point to **real timing races** in the async render/scroll path, and we should *eliminate* them rather than rely on normal timing masking them. Not yet characterised — next session should: - Reproduce under `LAZYGIT_SLOW_RENDER` (try a range of values; the races are intermittent) across the three transitions (files→staging, commit→patch-building, and the escape), all while **scrolled down**. - Use the single `SetOriginY` chokepoint + `bt` and/or the §10 tracer, plus the `ReadToEnd`/`InitialRefreshAfter`/`ApplyInitialScroll` ordering, to pin which interleavings produce a bad frame. Suspects worth scrutinising: the ordering between the task's first `ApplyInitialScroll` paint and the `ReadToEnd`-driven selection restore; the `afterLayout`-deferred pty task creation racing a layout pass; and `CopyContent` vs. the task's first write. - Memory: `focused-main-view-flicker-timing-races`. --- ## 12. Restore by patch identity, escape routing, and the plan to solve the three entangled problems A design discussion (it did **not** result in code; the implementation is for a **new session**). Three things came out of it: a better model for the escape restore, a set of escape-routing cases the current prototype gets wrong, and a decision about *when* to solve the hard async problems. ### 12.1 The restore should anchor on a patch identity, not a numeric scroll/index The current escape (§6/§11) saves the main view's `OriginY` + selection **index** and replays them. That's only right when the content is unchanged. But the whole reason you'd escape *after doing something* in the staging/patch view is that you changed the content — you staged a hunk, or `d`-dropped one — so a numeric index now points at a different line. (§4 already conceded "the selection may be slightly off; no fix planned.") The right model: on escape, read the explorer view's **current selection at that moment** as a patch identity `(file, type, source-line, side)` — *after* the host's auto-advance has already moved it to a still-valid line — then find that identity in the freshly re-rendered main view and scroll it into view. This is the **inverse** of the diff-line-metadata primitive (identity → rendered row, rather than row → identity), and it is the **same operation** as the `-U` context-change scroll-preservation consumer (see diff-line-metadata-notes.md §1 item 5). It also lets the `FocusedMainViewSnapshot` store *less* (the `OriginY` + main-view `SelectedLineIdx` become derivable), which is a simplification. Note the difference from the `-U` case's "anchor on the nearest surviving change line" fallback: that's for when context lines genuinely vanish. For staging-escape the host's auto-advance normally hands us a valid line directly; the nearest-surviving fallback is only for the degenerate cases below. ### 12.2 Escape routing — which half to return to, or whether to at all The escape target is really `(context, identity)`: which focused-main half corresponds to where the explorer's selection ended up. The current prototype gets several cases wrong: - **Stage a non-last hunk** — selection auto-advances within unstaged → restore there. The common, already-conceptually-fine case. - **Stage the *last* unstaged hunk** — unstaged becomes empty and the selection crosses to the **staged** panel → escape should land in the **staged half** (the secondary view), not unstaged. *Currently lands in the files panel — bug.* - **`` between unstaged/staged inside the staging view** — escape should return to the half matching the side you're on. *Currently broken — bug.* - **Drop the last unstaged hunk with nothing staged** — the staging view auto-closes; focus goes to the files panel. *Correct as-is*: the main view would only show "No changed files", so there's no point focusing it. (Probably not deliberate in the prototype, but it's the right outcome.) - **Drop a hunk in the custom patch builder (dropping it from the commit), or "Remove patch from original commit" from the custom-patch menu** — the patch builder *always* closes (it can't mutate the commit from within it), not just on the last hunk. Re-focusing the main view is right, but here there is **no host auto-advance**, so we'd have to advance the selection ourselves. Since these are infrequent, acceptably focusing the **side panel** instead is a fine shortcut. So the return target is: unstaged-selection → main; staged-selection → secondary; no valid selection / empty → files panel; custom-patch-builder → side panel (shortcut) or self-advance. ### 12.3 Decision: solve the three entangled problems in the prototype (next session) The new restore mechanism, the **§11 timing races**, and the **`BufferLineForViewLine` staleness trap** (diff-line-metadata-notes.md §8) are entangled: the identity-based restore reads/parses the buffer *while it is still loading*, which is exactly where both the races and the staleness bite. We decided **not** to defer these to productionization. A production plan written around three unsolved, entangled mechanisms isn't a plan; the prototype exists to retire that unknown cheaply (build-order §7). Resolve them here, and productionization becomes transcription. Attack order (dependency-first, to keep it from ballooning): 1. **§8 staleness fix first.** A bounded *correctness* fix with a known shape (snapshot `viewLines`+`lines` under one lock, or tie the read to the task that produced the buffer). Needed regardless, and it's what makes reading/parsing-during-load safe — which everything else depends on. 2. **Characterize the §11 races early, timeboxed, before designing around them.** The one real sink risk is that they're not yet characterised: we don't know if each is a specific bad interleaving (bounded fix) or a fundamental tension in the async-lazy-render model (e.g. no flicker-free first paint without buffering a screenful first). That distinction changes the restore design *and* is itself a key production-plan input, so pin it cheaply up front. This is "understand the race to choose the right fix", not "decide whether to fix it" (we fix it). 3. **The new restore mechanism**, which splits: - **sync half** — the §12.2 routing (which context / side panel); largely independent of timing, can progress in parallel. - **async half** — a *predicate* scroll: generalize `ScrollToOriginYForNextTask(y)` (§11) to "scroll to the row matching this predicate, applied the first refresh at which it's satisfiable" (the read loop scans the lines read so far via the metadata primitive; the fixed-`y` case is then just a trivial predicate). This is the "keep parsing as it loads" piece and is the part that sits on §8+§11. ### 12.4 Memory `focused-main-view-flicker-timing-races` already covers the races. The escape restore reworking and the three-problem plan above are recorded here. --- ## 13. Session 4: characterizing the §11 timing races Session 4 did §12.3 step 1 (the §8 staleness fix — see diff-line-metadata-notes.md §8) and this characterization (step 2). The conclusion drives part 3. ### 13.1 Why the faithful repro is the *interactive* app, not a headless test The §11 method (LAZYGIT_SLOW_RENDER + the `SetOriginY` chokepoint tracer via `just debug` / `just print-log`) is inherently interactive, and that is not an accident of tooling — the headless integration harness **cannot reproduce the pager-path races** for two structural reasons: - **cmd vs. pty path.** With a real pager configured (delta), the main-view re-render goes through `newPtyTask` (`pkg/gui/pty.go`), which marks the view loading synchronously but **defers the actual task creation to `afterLayout`**. The default test setup has no pager, so it takes `newCmdTask` (`tasks_adapter.go`), which creates the task **synchronously**. The `afterLayout` deferral is one of the race ingredients (§13.3), so the cmd path doesn't exercise it. - **env allowlist.** `pkg/integration/components/env.go` passes only a strict allowlist (`PATH`, `TERM`, `HOME`, git config) to the lazygit subprocess, so `LAZYGIT_SLOW_RENDER` doesn't even reach it without patching the harness. So the characterization below is **code-grounded and mechanically conclusive**, not visually confirmed in this session. The fixes it prescribes still want a confirming tracer run on the interactive app (real pager, scrolled down, a range of slow-render values). The two races are *mechanisms in the code*, not guesses about flaky values — which is the standard the two prior misdiagnoses (§11 corrections #1/#2) failed to meet. ### 13.2 The escape origin/content timeline (commit→patch-building→escape, scrolled to S) `EscapeFromPatchExplorer` (`patch_building_helper.go`), with the main view's saved scroll = S and the patch view's current scroll = P: 1. `ScrollToOriginYForNextTask(S)` — sets the manager's pending-scroll field (not a view write yet). 2. `Push(SidePanel)` — focusing the side panel runs its `onRenderToMainFn`, which calls `RenderToMainViews(Normal pair)`. Inside `refreshMainViews` (`main_panels.go`): - `RefreshMainView(Normal)` → `runTaskForView` → `newPtyTask`/`newCmdTask`: `StartLoading()` (sync) and read the pending scroll; the pty path **defers task creation to `afterLayout`**. - `moveMainContextPairToTop(Normal)` → `moveMainContextToTop(Normal)` → **`CopyContent(topView = the patch view, Normal)`** → `Normal.oy = P`, and Normal's buffer becomes the *patch* content. (`onNewKey`'s top-reset is suppressed because the pending-scroll field is set.) - the reset loop sets the *other* mains (incl. the patch view) to oy 0 — **after** CopyContent, so it no longer feeds 0 into the copy (the §11 correction #2 fix). 3. `Push(MainView=Normal)` — just focuses/highlights; **no second re-render**. 4. Next layout pass → `afterLayoutFuncs` drained → the pty task is actually created (`NewTask` → goroutine → creates `readLines`, reads lines). 5. At `InitialRefreshAfter` (= height + S + 10 lines read) the task's `ApplyInitialScroll` sets `Normal.oy = S` and does its first refresh — the first paint that shows the real commit diff at S. 6. The escape's `OnUIThread(…)` → `ReadToEnd(restore)` restores the **selection** (`FocusPoint`, no origin change) once the diff is read. The flicker window is **between step 2 (oy=P, buffer=patch placeholder) and step 5 (oy=S, buffer=commit diff)**. Layout-driven draws that land in it show whatever is in `(oy, viewLines)` at that instant. ### 13.3 The two races, classified **Race A — partial content drawn at the placeholder scroll during load (content/scroll). BOUNDED interleaving over a FUNDAMENTAL constraint.** Between the task's first write (step 4) and its first official paint (step 5), `oy` is still P and the buffer is being overwritten from the top with the commit diff. Layout passes call `draw`, and because each write sets `tainted`, the draw's `refreshViewLinesIfNeeded` rebuilds the view lines from the *partial* commit diff (plus the retained patch tail past `freshViewLineCount`). So a draw in this window shows a Frankenstein frame: the **top of the commit diff at the wrong scroll P** (or partial content / stale patch tail), before it snaps to S. Intermittent because whether a layout pass lands in the window, and at what load fraction, depends on scheduling; at normal speed the load finishes before a layout pass lands there. - **Bounded:** the *specific* fix is to keep the placeholder **coherent** until the first official paint, instead of letting partial content leak in. The task already controls *its* refreshes; the leak is that *layout* draws also rebuild from the half-written buffer. Suppressing the view-line rebuild **only while a scroll-restore is pending its first paint** (gated on the pending-scroll field, so the normal load-from-top case is untouched) keeps the draw showing the retained placeholder at P until step 5 swaps atomically to the commit diff at S. No scroll jump, no Frankenstein frame. - **…over a fundamental constraint:** you still see *something* during the load — with the fix it's the coherent placeholder (the patch) rather than a broken frame. There is **no flicker-free first paint of the target content at S without first having that screenful buffered.** This is the key production-plan input the §12.3 step-2 question asked for: the model can only choose *what* the pre-paint frame shows, not eliminate it. The two coherent choices: - (a) keep the outgoing view's content (the patch, via CopyContent) as the placeholder — coherent but the *wrong* content shown briefly; or - (b) **don't clobber the destination's own buffer.** On escape, the Normal view's buffer *already held the commit diff at S* (it was only hidden when we entered the patch explorer, never cleared — §3). `CopyContent` overwrites that perfectly-good content with the patch. If `moveMainContextToTop` did **not** copy over a view that already holds appropriate content, and the re-render kept that old buffer as the placeholder until its first paint (Reset already retains the view lines for flicker-avoidance), the placeholder would *be* the commit diff at S and the swap to fresh content would be invisible. (b) is the strong lever and supersedes §6's "avoid clobbering doesn't help" — that was about *entry*; on *escape* the destination's stale buffer is exactly what we want. **Race B — the selection restore can fire before the task is live (selection). BOUNDED bad interleaving.** The selection restore is scheduled as `OnUIThread → ReadToEnd(restore)`. `ReadToEnd` fires its callback **synchronously and immediately when `manager.readLines == nil`** (tasks.go) — the documented premature-fire trap (§3). The escape's re-render task is created by `Push`, but its `readLines` channel is created later, inside the task goroutine (and only *after* it has stopped the previous task, which blocks on `notifyStopped`). The restore is deferred one UI tick to let the task become live — but `OnUIThread` (`g.Update`) runs on a later main-loop iteration whose ordering against the task goroutine reaching `readLines = make(...)` is **not guaranteed**. If the tick wins the race, `ReadToEnd` fires `restore` immediately, `FocusPoint(SelectedLineIdx)` runs before the content is loaded that far and **no-ops** (it returns early when `cy > lineCount`), and the selection is **silently not restored**. Intermittent. - **Bounded:** thread the after-load callback **into the task's lifecycle** the same way the scroll restore is (a field on the manager that the next cmd/pty task folds into its initial `LinesToRead.Then`, set at creation), instead of a separate post-hoc `ReadToEnd`. Then it always fires when *that* task's initial read completes — never against a nil channel. This is the same one-mechanism ("do X after the re-render") part 3 needs for its identity-based restore, so it is foundational, not throwaway. Ordering is safe: `ApplyInitialScroll` (oy=S) fires at `InitialRefreshAfter`, which is < the initial read total, so the scroll is already applied when the `Then` runs. ### 13.4 Implications for part 3 (the restore rework) - **One restore mechanism, threaded into the task.** Both the scroll restore (already done via `scrollToOriginYForNextTask` → `ApplyInitialScroll`) and the selection restore should ride the *same* next-task hook, eliminating the separate `ReadToEnd` and Race B. Part 3 generalizes the scroll half to a **predicate** ("scroll to the row matching this identity, at the first refresh it's satisfiable"); the selection restore becomes "once loaded far enough, focus that same identity's row." Build them as one "after the re-render, reconcile to this identity" callback. - **Prefer (b): reuse the destination's own buffer as the placeholder.** Part 3 should investigate not clobbering the focused main view's retained buffer on escape, which makes the common "content unchanged" escape genuinely flicker-free (invisible swap) and reduces Race A to the rare "content actually changed" case. (Freshness still requires the re-render; the win is the *placeholder* being right.) - **Race A's coherence fix (suppress rebuild while a scroll/predicate restore is pending its first paint) is gated on the pending field**, so it's safe for the normal case and carries into the predicate generalization unchanged. ### 13.5 Status / what's left > **Update — the Race A fix was reworked.** The session-4 first cut used the > gated `holdViewLines` flag (suppress the view-line rebuild during a > scroll-restore load). The user judged that — and the §8 `freshViewLineCount` > guard — as patches that work *around* a broken invariant rather than restoring > it: many readers (`BufferLines`, `ViewLinesHeight`, the diff-line readers, …) > would each have to know which buffer to trust. Both patches were **reverted** > and replaced by an **off-screen render** (see below). `holdViewLines` and > `freshViewLineCount` no longer exist. - Race B (selection premature-fire): **fixed**. The restore rides the re-render task via a `thenForNextTask` hook on the buffer manager, folded into the cmd/pty task's initial-read `Then`; the `OnUIThread → ReadToEnd` dance is gone. (Unchanged by the rework.) - Race A (coherence during load) **and** §8 (stale-tail mapping): **fixed together** by the off-screen render. A cmd/pty task now `BeginOffscreenRender()`s — writes go into a second `viewBuffer` (`View.offscreen`) while the displayed buffer, and so everything every reader sees, stays the previous render. At its first-paint point (`InitialRefreshAfter`, or EOF for short content) the task `SwapInOffscreenRender()`s: the off-screen buffer becomes the displayed buffer in one atomic step and the saved scroll is applied in the same step. So no reader ever sees a half-written buffer at the wrong scroll (Race A), and because the swap is a wholesale replace, `refreshViewLinesIfNeeded` now **truncates** the view lines — the stale tail (§8) can't form. `clear()`/`Reset()` abandon any in-progress off-screen render so a synchronous `SetContent` after a stopped task writes to the display. The mechanism is **unified** (every async render uses it), not gated on scroll-restore. The swap holds `writeMutex` for now; per [[main-thread-over-mutexes-direction]] it could later become a main-thread bounce. - The (b) no-clobber lever (don't `CopyContent` over the focused main view's own retained buffer on escape, so the placeholder *is* the right content) is **not** done — still the stronger part-3 improvement for the common unchanged-content escape. Prep history (clean commits): extract `viewBuffer` → make the writing methods operate on a `viewBuffer` → revert the two patches (separately) → off-screen render. > **Verification caveat (important):** all of this was reasoned through and is > covered by gocui unit tests (`TestOffscreenRender`, `TestBufferLineForViewLineStaleTail`) > + green `e2e-all`, but the **flicker behaviour was NOT visually confirmed** — > session 4 ran headless, and the faithful repro is the interactive app (§13.1: the > headless harness uses the cmd path and blocks `LAZYGIT_SLOW_RENDER`). Confirm with > `just debug` + `just print-log`, scrolled down, across a range of > `LAZYGIT_SLOW_RENDER` values, for all three transitions. **Part 3 interplay (carry forward):** with the off-screen render, the *loading* content lives in `View.offscreen`, while `v.buf`/`viewLines` and the view-line readers (`DiffLineMetadataInLine` / `bufferLineForViewLine`) keep describing the *displayed* (previous) render. Part 3's predicate scroll, which inspects rows *as they load* to decide when to swap, must therefore scan the **off-screen** buffer's cells (a new accessor), and the swap point generalizes from "InitialRefreshAfter lines" to "the first read at which the predicate is satisfied on the off-screen content". The §8 #1 two-call atomicity constraint (diff-line-metadata-notes.md §8) applies to that scan. ### 13.6 Follow-ups discovered after the off-screen render landed - **Scrollbar regression (FIXED — session 5).** With the off-screen render, the swap happens at the *first-paint* point (`InitialRefreshAfter` = `height + oy + 10` lines), but the scrollbar is sized from the *displayed* buffer's height (`ViewLinesHeight()` → `calcRealScrollbarStartEnd` in `gui.go`). So at the swap the displayed buffer is only a viewport-and-a-bit tall, while the task keeps reading up to `linesToReadForAccurateScrollbar` (`min(height*(height-1)+oy, 5000)`, far more); the scrollbar thumb therefore jumps to reflect the short content and then grows back to its former position as the rest loads. The old incremental mechanism masked this: the non-truncating `viewLines` tail kept the height at the *previous* render's value until EOF, so the bar stayed put. Reproduces clearly under `LAZYGIT_SLOW_RENDER=2` on the files panel's 10s auto-refresh while scrolled down (main content stays stable — good — but the bar flickers). **Resolution (session 5).** Not something more fundamental about the *swap* — the off-screen render correctly fixed content coherence. The actual point: the scrollbar reads a **strictly later quantity** than the viewport-fill paint. The first paint needs only `oy + height` lines (enough to show the scroll position); an accurate scrollbar needs the *total* height, known only near end-of-read. So no single early swap can have both the content and the scrollbar right — they depend on different read amounts. Delaying the swap to the scrollbar-accurate point (the first candidate direction) was **rejected**: it would regress *flicking latency* for large diffs (the new diff wouldn't appear until ~1332 lines read instead of a screenful) and the *no-placeholder first render* (a blank/"loading…" view until the full read, since the off-screen render only shows *old* content when there is some). Instead we took the second direction: **hold the scrollbar height while a load is in progress.** `FreezeScrollbarHeight` (gocui) records the view's height when the load begins (captured at `StartLoading`, while the view still shows the previous render — for escape this is *before* `CopyContent`, so it's the retained commit-diff height, i.e. the correct final height); the scrollbar is sized from `max(displayed height, scrollbarHeightFloor)` until `UnfreezeScrollbarHeight` releases it at EOF (`onEndOfInput`). `clear()` also releases it, so a synchronous string render superseding a still-loading diff (main views can render either, see `runTaskForView`) doesn't leave a stale floor. This is the **same class** as the layout scroll-up clamp, which already ignores the partial content height while `IsLoading()` — only one reader (the scrollbar calc) sees the floored height, all other `ViewLinesHeight()` callers stay oblivious ([[isolate-new-concepts-from-clients]]). Landed as an **`amend!` against the off-screen-render commit** (`1fd1325c2`), since that commit introduced the regression (AGENTS.md: don't sequence a branch so an earlier commit regresses and a later repairs); the message gained a paragraph on the scrollbar. Covered by `TestScrollbarHeightHeldWhileLoading` and `TestScrollbarHeightReleasedWhenContentReplaced` (both fail on the un-floored code). **Verification caveat:** mechanically unit-tested and `e2e-all` green, but the visual flicker fix was **not** confirmed interactively this session (headless can't repro, §13.1) — still wants a `LAZYGIT_SLOW_RENDER=2` `just debug` pass, scrolled down, across the 10s refresh, escape-from-staging, commit→patch-building, and plain commit-flicking. - **10s auto-refresh vs. the identity-based restore (note for productionizing part 3).** The files panel (and others) do a periodic background refresh (default 10s) that re-renders the main view by starting a *new* task. This can fire just after escaping staging, while the escape's re-render task is still reading toward the restore target (the saved scroll/selection now, the target patch line in part 3). The refresh's task **stops and replaces** the escape task and knows nothing about the restore — `scrollToOriginYForNextTask` / `thenForNextTask` were already consumed (cleared in `NewTask`) by the escape task, so the replacement only preserves the current scroll and the identity-restore is silently dropped. Not urgent (the window is small), but productionization of part 3 must handle it — e.g. let the pending restore survive task replacement, or have the refresh re-assert it. **Session 5 update — it's worse than "restore dropped".** Testing the scrollbar fix under `LAZYGIT_SLOW_RENDER=2`/`20` with autoRefresh **on**, the escape↔refresh overlap produces visible **rendering artifacts / glitches**, not merely a dropped restore — two re-renders (escape + the periodic refresh) of the *same* view interleaving, made far more likely by slow render. With autoRefresh **off** there is no flicker at all; without slow-render the artifacts have **not** been reproducible even once. The open decision (raised with the user): do we harden this in the prototype or defer to production? The pivotal unknown is **which kind** of problem it is, and we don't know yet: - **(a) a soundness hole in the off-screen-render / task lifecycle** — two re-renders of one view leaving *shared `View` state* half-applied: a stopped escape task can leave `v.offscreen` non-nil (stopped between `BeginOffscreenRender` and the swap); the pty `afterLayout` deferral can queue *two* task-creations from one layout cycle, and the manager's pending fields (`scrollToOriginYForNextTask`, `thenForNextTask`, and now the `FreezeScrollbarHeight` floor) are read at different instants by each, so the refresh task can re-capture the floor / re-read the pending scroll mid-escape. If this is the cause it would surface beyond escape (any two rapid re-renders of a view), so it's a defect in the mechanism we just built — **must** be fixed in the prototype (AGENTS.md: a known race is not "live with it"). - **(b) "merely" the dropped restore** (the issue already described above) plus the consequent old-content-then-jump being drawn — in which case the *mechanism* is sound and the real fix is part 3's "one restore that survives task replacement", where a throwaway prototype patch would likely be discarded. Lean (session 5): **characterize now, timeboxed** (§12.3 step 2 — "understand the race to choose the right fix"), then let the finding pick the fix's home. (a) gets fixed here; (b) is confirmed as a part-3-owned item and deferred. The characterization itself is cheap and is exactly the kind of entangled unknown the prototype exists to retire ([[resolve-hard-unknowns-in-prototype]]). **Characterization done (session 5) — the dominant artifact was a third thing, simpler than either (a) or (b).** Method: throwaway `[CHAR]` logging at every task lifecycle point (render request, `NewTask` consume/bail/run, swap@first-paint, swap@EOF, stop) + interactive repro under `LAZYGIT_SLOW_RENDER=20`, `refreshInterval=3`, scrolled down. The logs showed the glitch even with **no escape present** — it's the periodic refresh re-rendering the main view faster than it loads, overlapping *itself*. Smoking gun: `swap @EOF i=1 stopped=true` on a ~147-line diff — a **stopped task taking the end-of-input branch and finalizing** (swap its 1-line off-screen buffer in, clamp the origin to 1, clear `loading`). Root cause: when a task is stopped, `opts.Stop` closes *and* the scanner closes `lineChan`, so the read loop's `select` is a coin-flip; ~half the time a stopped task lands in the `!ok`/EOF branch instead of the stop branch. Pre-existing (the EOF branch always clamped via `onEndOfInput`), but the off-screen render made it far worse by also swapping a truncated buffer in. **FIXED** (commit "Don't run end-of-input handling for a render that was stopped"): the EOF branch now re-checks `opts.Stop` and bails like the explicit stop case. Confirmed by the follow-up log: every stopped task now logs `EOF-but-STOPPED breaking clean`, no more truncated swaps, and the content stays put through refresh churn. Not deterministically unit-testable (the bug *is* the non-deterministic select; a test would be flaky on the old code), so no test — a rare justified skip of demonstrate-the-bug-first. My original **(a)** theory (the `afterLayout` double-queue letting a refresh consume the escape's pending scroll/`then`) was **not** what the logs showed: escape tasks consistently consumed their *own* `scroll`/`then` (`consumedScroll=true consumedThen=true`). What remains of the escape race is plain **(b)**: the escape task is stopped mid-read by a refresh *before* it reaches its first-paint swap (seen as `target=93 thenPending=true` consumed, then the task stopped at i`-to-staged case.** When the file has *both* unstaged and staged changes the files panel splits (`Normal` = unstaged, `NormalSecondary` = staged). If you tab to the staged half and escape, the staged-line identity is in `NormalSecondary`, but we currently return to `Normal` and set the restore on `Normal`'s manager, so the scan won't find it there. The fix is to choose the target focused-main context from the **escaping explorer half's window** (`context.GetWindowName()`: secondary ⇒ `NormalSecondary`) — but it must reckon with the post-action **split state** (the staged content is in `NormalSecondary` only when a split survives; otherwise it's in `Normal`), so it's not a pure window-name map. - **Custom patch builder drop → side panel** (§12.2): the builder always closes and there's no host auto-advance, so the accepted shortcut is to focus the side panel rather than self-advance. Not implemented; patch-builder escape currently runs the same identity restore against `Normal`. ### 14.4 (b) no-clobber lever — analysed, NOT done §13.4 framed (b) as "skip `CopyContent` over the focused main view's retained buffer on escape, so the placeholder *is* the right content and the swap is invisible". Skipping the copy is easy (gate `moveMainContextToTop`'s `CopyContent` on a pending restore via a `HasPendingRestore` check). **But it isn't sufficient on its own:** `refreshMainViews` resets every *other* main pair's origin to 0 when a pair is moved to the top, so entering the patch explorer already zeroed `Normal`'s `oy`. So on escape `Normal`'s buffer is the right *content* but at scroll 0, not at the saved scroll S — the swap+`FocusPoint` would still visibly scroll from the top. A genuinely invisible unchanged-content swap needs the placeholder kept at S too: either don't zero the focused-main pair's origin on entry, or re-establish it before the re-render. Left for a follow-up; §13.3's "(b) supersedes (a)" still holds as the target, just with this extra requirement. (Without (b), the escape currently shows the `CopyContent`ed patch as a coherent placeholder until the swap — option (a).) ### 14.5 Known prototype limitations (productionization input) - **Match fidelity under the hyperlink backend.** `SamePatchLine` compares path + `PatchSelectLine` (source line + is-deletion). The dev config's default pager is delta with `--line-numbers --hyperlinks` → the main-view scan uses the **hyperlink** backend, which can't tell the side (`DiffLineOther`), so a **deletion** selected in the explorer won't match a scanned row and the restore won't find its line (scroll/selection then just isn't restored — no crash). #2's OSC metadata (the "patched delta" pager) gives full fidelity. Additions/context match fine. Acceptable for the prototype; **productionization lean (user, session 6): drop the hyperlink backend entirely** rather than support it imperfectly — rely on OSC metadata (the planned delta patch) and have users on an old delta update their pager. That also removes the side-less `DiffLineOther` identity, so every match carries a real side and the deletion case just works. - **Scan cost.** `FirstPaintReady` re-snapshots the off-screen buffer each line until the target is found (then it's O(1) via `OffscreenLineCount`), and `diffLineInfoFromContents` attempts the buffer-parse backend (building a texts slice) even when the hyperlink backend will answer — so the search phase is ~O(n²) in the loaded line count. Invisible in the common unchanged-content escape (the target is at the saved scroll and the swap is coherent regardless), bounded for shallow targets, but a deep target in a large changed diff would lag. Productionize with an incremental scan (don't rebuild the snapshot; resolve the newest line; pin the backend once). - **No fallback when the identity can't be read** (e.g. the explorer's selected line doesn't parse): the re-render then has no restore and resets to the top. In practice the auto-advance lands on a parseable change line, so this is rare. Memory to update: `focused-main-view-flicker-timing-races` (identity restore + #1 landed; interactive sign-off still pending), `resolve-hard-unknowns-in-prototype` (the entangled async unknown — scanning during load — is retired), and a new note that part-3 routing (§12.2) and the (b) lever are the remaining prototype work. --- ## 15. Next steps agreed at the end of session 6 The core async unknown is retired, so productionization is *transcription-ready* (decomposition sketch below). But we're **deferring productionization** deliberately to do more prototyping first — not because we need to learn more, but to make the prototype **compelling for pitching the OSC protocol to pager developers** ("here are the lazygit features you unlock by implementing it"). File/hunk navigation is the strongest such demo: it's impossible without the metadata once a pager restructures the diff. **Next prototype work (each a new session):** > **Update (session 7):** steps 1 and 2 below are **done** — see §16. Remaining: step > 3 (side-by-side delta) and the OSC spec draft. > > **Update (parallel session, 2026-06-10):** step 3 is **done** too — see §17. The > side-by-side prototype shows **v1 needs no format change** (correcting the guess > below that it "will likely add payload/format"); only the OSC spec draft remains. > > **Update (difftastic, 2026-06-10):** a further pager — **difftastic** — is now > prototyped in **both** its modes (side-by-side + inline), the categorical > #2-only case. Details and findings in diff-line-metadata-notes.md §10. v1 still > holds, but difftastic surfaced a **token-vs-line model mismatch** (§10.2) the > unified-diff pagers hid — the spec draft should speak to it. Emitter lives on > `prototype-osc-metadata` in `/Users/stk/Stk/Dev/Builds/difftastic`. 1. **Preserve scroll/selection when `{`/`}` change the `-U` context size** (diff-line consumer #5). **[done — §16.1]** Reuses the identity-restore machinery directly: capture the nearest *change* line (survives context changes, unlike context lines), re-render, restore it — the escape restore's sibling, triggered by the context-size change instead of escape. 2. **File/hunk navigation in the focused main view.** **[done — §16.2]** Agreed model: - **keys**: `n`/`N` = next/previous file; ``/`` = next/previous hunk — the **exact bindings the staging view already uses** for hunk nav (so no horizontal-scroll clash to worry about; the focused main view's `<`/`>` stay goto-top/bottom). - **"hunk" means lazygit's notion, not git's.** Not the `@@`-delimited section, but a **block of consecutive added/deleted lines separated by context** — there can be several within one git hunk. These are exactly the blocks the staging panel jumps between (`State.SelectNextHunk`/`SelectPreviousHunk` / `patch.GetNextChangeIdx`), and the main view should match. - **anchor** = the selected line if a selection is showing, else the **top visible line** (works for change-blocks too — the next block is the next run of change lines below the anchor, found from the per-line metadata `type`). - **target** = scan rendered rows via the diff-line primitive for the start of the next/previous change block (file nav: where metadata `file` changes). - **effect** = selection showing → move the selection to the target + scroll into view (like the staging view); **no selection → scroll the target to the top and do *not* create a selection** (stays in scroll mode). [decided] - "Previous" when the anchor is mid-block mirrors `State.SelectPreviousHunk` semantics. - #1 and #2 share the "scan rows for a metadata boundary/identity" core, so they pair in one session (#5 = restore-across-rerender path; nav = immediate path). 3. **Side-by-side delta mode** — prototype in **parallel, in the delta repo** (doesn't touch lazygit). Feeds the spec (below). **[done — §17; v1 suffices, no format change]** **OSC spec write-up:** **DONE — draft written** (`diff-line-metadata-osc-spec.md` at the worktree root). It's a draft for pager-dev *feedback*, not final. The unified single-column wire format is validated (§9.2), side-by-side is validated (§17 — v1 needs no addition), and the draft speaks to difftastic's token-vs-line mismatch (diff-line-metadata-notes.md §10.2). The **OSC number is resolved to `1717`** after a terminal-allocation audit (diff-line-metadata-notes.md §3.4 + the spec appendix); `456` is retired as the placeholder. The `456`→`1717` rename across the prototype code (delta/difftastic/gocui/lazygit + the env var, now `EMIT_OSC1717_METADATA`) is **done** — builds + metadata unit tests green in each repo, and fresh delta/difftastic release binaries built. **Still pending:** circulating the draft for feedback. **Decisions locked (session 6):** concurrency stays **mutex-based**, including for productionization (the main-thread-mutation rework is a separate, later effort — do not design around it now); the **(b) no-clobber** lever is **dropped** (escape is already flicker-free); **§12.2 split+tab routing** is **deferred to productionization**. **Productionization decomposition (sketch, for when we get there):** land as a bottom-up stack of independently-reviewable PRs — (a) the gocui async-render improvements (off-screen render + scrollbar hold + stopped-task fix + mouse-move lock, several master-worthy on their own); (b) diff-line primitive #1 (host-side buffer parse, serves no-pager/`--color-only`); (c) the focused-main-view feature on top of #1; (d) escape-restore-by-identity; (e) #2 OSC reader behind an "if the pager emits it" gate, gated externally on the delta patch being upstreamed. Drop the hyperlink backend (§14.5). The delta dependency means the feature can't fully ship to delta users until the OSC patch lands — decide whether to ship #1-only first. --- ## 16. Session 7: the two showcase consumers (#4 hunk/file nav, #5 context preserve) Built the §15 step-1 and step-2 prototype consumers — the ones that make the OSC pitch concrete, because both are impossible once a pager restructures the diff unless it emits per-line metadata. Both reuse the diff-line primitive (the `diffLineInfoFromContents` resolver and the gocui scan accessors from §14), so they paired in one session as predicted. Commits (most recent last), all green on `build`/`unit-test`/`e2e-all`/`lint`: 1. *Extract the identity-based restore into a context-neutral helper* — prep refactor. `restoreDiffLinePositionOnRerender(view, target, place)` is the escape restore's scan/swap machinery (`RenderRestore` + `FindDiffLine` + `OffscreenDiffLineContents`/`ViewLineForBufferLine`) with the *positioning* split out behind a `place(viewLine)` callback. Behavior-preserving: escape passes the same FocusPoint-and-select closure the inline `Apply` used. 2. *Preserve the diff scroll and selection when the context size changes* — consumer #5. 3. *Navigate the focused main view by file and hunk* — consumer #4 (+ a fixup on #2, the visibility guard below). ### 16.1 Consumer #5 — preserve scroll/selection across an `-U` context change `ContextLinesController.applyChange`'s `default` branch (the focused main view and every side panel, which all render their diff into the **"main"** window view) now calls `StagingHelper.PreserveDiffPositionOnRerender(Contexts().Normal.GetView())` right before `HandleRenderToMain()`. The increase/decrease-context keybindings re-render with a different `git diff -U` command, so the command key changes and the render *would* reset to the top; the preserve installs a restore that suppresses that (same `restore == nil` gate on `ResetOrigin` the escape uses) and re-establishes the position. - **Anchor on the nearest *surviving* line, preferring the anchor itself** (refined after interactive feedback — see §16.5). We'd like to keep the anchor line (the selection if one shows, else the top visible line), but it may not survive: a context line vanishes when the context shrinks. So `nearbyDiffLines` captures a *prioritized candidate list* — the anchor first, then outward (at-or-below preferred), each direction stopping at the first change line (a guaranteed survivor, so the list always contains one). `restoreDiffLinePositionOnRerender` was generalized to take that list and land on the first candidate the re-render still contains: the anchor itself if it survived (so a still-present context line stays put, or stays selected), else the nearest surviving line, minimizing scrolling. (The single-candidate case is exactly §12.1's "nearest surviving change line"; the escape path passes a one-element list.) - **Offset-preserving placement.** `place` puts the landed line back at the *same screen row* it was on (`SetOrigin(0, viewLine - row)`, `row` clamped into the view), so the view barely moves — unlike the escape's `FocusPoint` (centre-if-off), which is right for "navigate to" but would jump for "stay put". A showing selection is re-established on the line (`FocusPoint` scrollIntoView=false + `Highlight`); with no selection the view stays in scroll mode. - **Early swap only for the anchor; fallback resolved at EOF.** The candidate list isn't in load order (a nearer candidate can load after a farther one), so the incremental `FirstPaintReady` only early-paints when the *primary* (anchor) candidate is reachable; any fallback is resolved against the complete content at the guaranteed EOF swap (`firstPaint` runs `Apply` at end of input regardless). For a context change — a "stay put" redraw — the slightly later swap when the anchor didn't survive is imperceptible. - **Scope: the "main" window view only** (covers the focused main view *and* the side-panel diffs — they share the render path, which is the clean generalization the task asked for). The secondary focused main view (`NormalSecondary`) is **out of scope**: changing context while focused on it still jumps. Noted, not fixed. - **Visibility guard (fixup on #2).** `PreserveDiffPositionOnRerender` bails if the view isn't `Visible`. Otherwise, pressing `{`/`}` while a non-diff main context occupies the "main" window (merge conflicts) would set a restore on the hidden `Normal` view that never re-renders, so it would linger and wrongly suppress a *later* render's scroll reset. (In the reachable cases — side panel or `Normal` focused — `Normal`'s view is the visible one and re-renders immediately, consuming the restore, so this only bites the merge-conflicts edge.) ### 16.2 Consumer #4 — file/hunk navigation in the focused main view `MainViewController` gains four bindings, exactly the staging view's hunk keys plus `n`/`N` for files: ``/`h` = previous hunk, ``/`l` = next hunk (reusing `Main.PrevHunk`/`NextHunk`), `n` = next file, `N` = previous file (literal `config.Keybinding{...}`, no new userConfig field — matching the branch's config-removal trend). The focused main view's `<`/`>` stay goto-top/bottom. - **"Hunk" = lazygit's change block, not git's `@@`.** A run of consecutive added/deleted lines separated by context. `AdjacentChangeBlock` resolves each rendered row's type via the diff-line primitive, builds an `isChange` bool slice, and the pure `changeBlockStart` mirrors `State.SelectNextHunk`/`SelectPreviousHunk` line-for-line (previous-from-mid-block goes to the *previous* block's start). - **File nav targets where the metadata `file` changes.** `AdjacentFile` builds a per-row `paths` slice; the pure `fileStart` finds where the path changes, then backs up over the neighbouring file's *untagged* header rows (`backUpOverHeader`) so both directions land on the **top of the file** — the `diff --git`/`@@` header when the buffer is parseable, or the pager's file-header rows when only content carries metadata. This back-up is the bit that's impossible without the metadata: once delta restructures, the host can't otherwise tell which rows belong to which file. - **The anchor's file is found by scanning *down* (`anchorFilePath`), refined after feedback (§16.5).** Landing on a file header puts an *untagged* row at the top, so the next nav's anchor doesn't itself carry a path. The row whose path identifies the file you're "in" is the first tagged row at-or-below the top (the file's content), not the nearest tagged row in either direction — which would be the *previous* file's content just above the header, making a second `n` jump back into the file just left instead of advancing. - **Effect (decided model, §15):** anchor = selection if showing, else top visible line. Selection showing → move the selection to the target and **scroll it into view** (`showSelectionAtLine` gained a `scrollIntoView` param; clicks still pass false). No selection → **scroll the target to the top** (`SetOrigin`) and do **not** create a selection — stays in scroll mode. - The `changeBlockStart`/`fileStart`/`anchorFilePath` index arithmetic is pulled into pure functions and **unit-tested** (`diff_line_navigation_test.go`), covering both the parseable (every row tagged) and restructuring-pager (only content tagged) shapes, including navigating from a middle file's untagged header. ### 16.3 Verification status — first interactive pass done (§16.5); headless green `build`/`unit-test` (incl. the new pure-scan tests)/`e2e-all`/`lint` all pass. As in §13.1/§14.2 the headless harness can't repro the pager paths (cmd path, no `afterLayout` deferral, `LAZYGIT_SLOW_RENDER` blocked) and there is no focused-main-view e2e harness to extend, so the user ran the **interactive** pass (`just debug` + `just print-log`, scrolled, patched-delta and no-pager). The first pass worked except for two issues, both now fixed — see §16.5. Re-verify those after the fixes, plus the standing checks: - #5: `{`/`}` keeps the view roughly put (offset-preserving) instead of jumping to the top, both in scroll mode and with a selection; a still-present context line now stays put / stays selected (§16.5). - #4: ``/`` jump hunks, `n`/`N` jump files (landing on the file header); selection-vs-scroll-mode effect matches the staging view; under metadata delta the file nav works where buffer-parse can't (delta default mode), including repeated `n` across several files (§16.5). - The hyperlink backend is being **dropped** (§14.5) — ignore it. ### 16.4 Known limitations (productionization input) - **Scan cost.** Both consumers resolve *every* rendered row through `diffLineInfoFromContents` per action (`PreserveDiffPositionOnRerender` via the outward `nearbyDiffLines`, the nav via full `isChange`/`paths` slices), and the buffer-parse backend re-parses per call → ~O(n²) per keypress. Fine for a prototype keypress; productionize with an incremental scan and a pinned backend (same note as §14.5's restore scan). - **Nav only sees loaded content.** The nav scans the *displayed* buffer, so a target beyond the lazily-loaded portion isn't found (no-op). The initial read pulls ~`height*(height-1)` lines, so typical diffs are fully loaded; a target deep in a very large diff would need a `ReadToEnd` first (like `openSearch`). - **`NormalSecondary` context-change not preserved** (§16.1). ### 16.5 First interactive feedback (fixed) The user's first interactive pass found the navigation solid with a plain diff and hunk nav solid under patched delta, plus three behaviours to refine — all fixed: - **#5 anchored too eagerly on a change line.** Original: always restore the nearest *change* line, even when the anchor was a context line still in the patch — so the view jumped to the next `+`/`-` line past surviving context, and a selection on a context line moved off it. **Fix:** `nearbyDiffLines` builds a prioritized candidate list (anchor first, outward, stopping at the first change line each side), and the restore lands on the nearest *surviving* one — keeping the anchor line itself when it survives (context line stays put / stays selected, increase or decrease), only falling back outward when it doesn't. Generalized `restoreDiffLinePositionOnRerender` to a candidate list (escape passes one); fallback is resolved at the EOF swap since candidates aren't in load order. See §16.1. - **#4 file nav stalled under patched delta on the second `n`.** After the first `n` landed on a file header (an *untagged* row under delta), the next `n`'s anchor row carried no path; the old `nearestPath` then picked the *previous* file's content just above the header and "advanced" back into the file just left. **Fix:** `anchorFilePath` determines the anchor's file by scanning **down** first (the content at/below the top), not the nearest tagged row in either direction. No delta change needed — the metadata on content lines is enough. New unit cases cover the middle-file-header case. Commits: a `fixup!` on #4 (`anchorFilePath` + tests) and an `amend!` on #5 (the candidate-list anchoring; the message was updated since "anchor on a change line" no longer described it). The #5 amend! also carries the shared-helper generalization (`restoreDiffLinePositionOnRerender` → candidate list), which strictly belongs to the prep-refactor commit but can't be split out non-interactively (same file, and the context-change caller it adapts didn't exist at the prep commit) — fold or re-split as preferred. --- ## 17. Side-by-side delta prototype (parallel session) — feeds the OSC spec §15 step 3: extend delta's per-line metadata emission to **side-by-side** mode. Done in the delta repo (`prototype-osc-metadata`, commit `bbec9b5`), parallel to session 7 and independent of lazygit. This is the input the OSC spec draft was waiting on for its second open item — and the answer turned the open item into a *closed* one. ### 17.1 What it does — per-cell attachment Unified delta funnels every content line through one emit point (`Painter::paint_lines`), so the metadata rode there. Side-by-side doesn't: it paints each visual row as **two panel halves** via `Painter::paint_line` (singular), so the OSC is attached **per cell**: - **left half → the minus line's identity** (`d`, carries new+old numbers), - **right half → the plus line's identity** (`a`, carries new), - **a context line — shown in both halves → the same `c` record before each half.** Empty counterpart cells (the blank half of a pure add/delete) and wrapped continuation rows carry **no** OSC. So a changed line — a paired minus/plus on one visual row — carries **two** records on that row: `d` before the left gutter, `a` before the right. > **Correction (after the difftastic prototype, see diff-line-metadata-notes.md §10.8):** > "wrapped continuation rows carry no OSC" is a **bug**, not a feature, whenever the > *pager* does the wrapping (delta in side-by-side mode, difftastic side-by-side): > each wrapped row is a distinct host buffer line, so `e`/`enter`/hunk-nav break on > the un-tagged continuations. The fix — emit the line's record on **every** wrapped > output row — was applied to **both** difftastic and delta (delta re-emits the > primary's record without advancing its line-number counters). See > diff-line-metadata-notes.md §10.8. ### 17.2 The verdict: v1 needs NO addition for side-by-side This **resolves** the spec's side-by-side open item and **corrects** §15's guess that the parallel prototype "will likely add payload/format" — it doesn't. The v1 wire format (`version ; type ; new-line ; old-line ; file`) suffices, **with no column/side discriminator**, because: - **`type` already implies the column**: `a` (added) is inherently the new/right side, `d` (deleted) the old/left side. The host needs no extra field to know which column an `a`/`d` cell belongs to. - **context (`c`) is symmetric**: the same record is emitted before both halves, so the two columns are indistinguishable *by payload* — but they don't need to be, because they're the same logical line. The host tells the columns apart **by position**, which it does anyway. A side discriminator would only earn its keep to disambiguate the `c` case, and that case needs no disambiguation. So: don't add one to v1. ### 17.3 The one latent v1 gap (shared with unified, not SxS-specific) Side-by-side makes one v1 limitation *visible* that unified hid: **context and addition records carry no old-file line number** (the `old-line` field is empty for `c` and `a`). In side-by-side the old/left column is right there on screen, so the temptation to read an old-file number off a left-column cell is real — but the metadata doesn't carry it. Concretely, with a net insertion above a context line so old≠new: ``` {{OSC 1;c;3;;b/b.py}}│ 2 │ctx_b {{OSC 1;c;3;;b/b.py}}│ 3 │ctx_b ``` the left gutter shows old line **2**, but both halves' OSC says `new=3`. A host reading the left cell gets the *new* number, not the old. This is **not forced by side-by-side** — unified's `c` record has the same empty `old-line`. It's a pre-existing v1 property that SxS merely surfaces. If we ever need per-column-exact numbers, the fix is **carry both numbers on every record** (a v2 change applying to *both* modes), not a side-only tag. For now nothing in the host needs the old-file number (the §16 consumers key on `type`/`file`/change-block structure and the new-file line), so v1 stays as is. ### 17.4 Implication for the lazygit reader (when productionized) The host's row→identity model must become **row+column→identity** for side-by-side: a single rendered row can carry two records (the changed-line case), keyed by which column the OSC precedes. The §16 consumers (nav, restore) were prototyped and tested against **unified-shaped** output only — one record per row — and have **not** been exercised against side-by-side delta output. Two things to check when that's wired up: the resolver (`diffLineInfoFromContents`) must accept two OSCs on one line and bucket them by column, and the change-block/file scanning (§16.2) must decide whether a "row" is a left-or-right cell or the pair. Out of scope for the prototype; flagged for productionization. ### 17.5 Implementation gotcha + verification - **Counter ordering.** Side-by-side advances delta's line-number counters **per aligned row** (with increment flags and post-hoc fixups), *not* in the unified "all-minus-then-all-plus" order the emitter's counter arithmetic assumes. So the OSC strings can't be produced inline at each panel paint — they're **precomputed** over the whole minus block, then the whole plus block (the unified order), and looked up by index during painting. Context lines also had to be threaded through `paint_zero_lines_side_by_side`, which previously never saw the emitter — without that the counters would desync across context lines. Records come out byte-identical to the single-column emitter. - **Verified in delta**: payloads correct per column (incl. the paired-row two-record case and wrapped continuations carrying none); stripping the OSC456 sequences yields **byte-identical** output to unpatched delta across `spaces`/`ansi` fill, narrow-width truncation, `--syntax-theme=none`, wrapping, and `--keep-plus-minus-markers`; full suite (437 tests) green. **Host (lazygit) consumption of SxS output is a separate, later step** — not done here. --- ## 18. Session 8: preserve scroll/selection when switching pagers A small new consumer of the identity-based restore (diff-line-metadata-notes.md §1 item 7) — the sibling of §16.1's `-U` context-size preserve, triggered by a pager change instead. The branch already has a **cycle-pagers** feature (`|` / `\`, `GlobalController.cyclePagers`/`cyclePagersBackward` → `onPagerChanged`); this hangs the restore off it. One commit: *Preserve the diff scroll position when switching pagers* (`2c8dfa13b`). ### 18.1 The change `onPagerChanged` (`global_controller.go`) re-renders the current side's diff into the **"main" window** view when the focused context is that side panel or the focused `Normal`/`NormalSecondary` main view. Right before that `HandleRenderToMain()`, it now calls `Staging.PreserveDiffPositionOnRerender(Contexts().Normal.GetView())` — the exact same one-liner §16.1's `default` branch uses. No new machinery; the producer (`PreserveDiffPositionOnRerender` → `restoreDiffLinePositionOnRerender`) already exists and this is just a third caller ([[isolate-new-concepts-from-clients]]). ### 18.2 Why it's needed in *both* cases (and what each did before) How a pager is applied decides the async task's command **key** (`cmdStr`, which gates `onNewKey`'s top-reset), and the two kinds of pager entry differ: - **Plain `pager:` entry** (e.g. delta ↔ cat). The pager is handed to git via the **`GIT_PAGER` env var** (`pty.go`), *not* baked into the command args — so `cmdStr` is unchanged across the switch, `ResetOrigin` is false, and the old origin simply survived. That looks like "scroll preserved", but it's preserved **by raw line number**, which is wrong the moment the two pagers structure the diff differently (side-by-side ↔ inline): the same screen line is now a different patch line. - **`externalDiffCommand` entry.** This *is* baked into the git command (`diff.external=…` + `--ext-diff`, `diff.go`), so `cmdStr` **changes**, `ResetOrigin` is true, and the re-render **jumped to the top**. (This is the case the user flagged.) The identity restore fixes both at once: setting `restoreForNextTask` makes `ResetOrigin = restore == nil && …` false (no top-jump for the externalDiffCommand case), and `Apply` re-anchors on the same patch line by identity (right anchor for the plain-pager case when the structure changed). When the structure *doesn't* change it's a no-op relative to before — the anchor lands at the same screen row. ### 18.3 Scope, fallback, and the one real limitation - **"main" window only**, exactly like §16.1: `NormalSecondary` is not preserved (still jumps). Same accepted limitation. - **Staging/patch-building untouched.** `onPagerChanged`'s condition is false when those are focused (`CurrentSide()` is the side panel, not the staging main context, and the key isn't a `NORMAL_*` one), so cycling pagers there doesn't re-render — correct, since the staging/patch views render their patch directly, not through a pager. - **Graceful fallback.** `nearbyDiffLines` only collects candidates that the diff-line primitive can resolve in the *old* pager's output, and `FindDiffLine` only lands if it can resolve them in the *new* one. If a pager's output is unresolvable (e.g. `cat -n`: buffer-parse fails its integrity check, no metadata/hyperlinks), the restore either installs no candidates or finds no match → harmless no-op, degrading to the pre-change behaviour (stay put for a plain pager, reset for externalDiffCommand). No crash. - **The headline structural win (side-by-side ↔ inline) is wired but not yet fully realized.** Matching across that switch needs the host to resolve the *target* pager's output. For side-by-side delta that's the **row+column→identity** resolver that §17.4 flags as still a separate, un-built step (`diffLineInfoFromContents` must accept two OSCs per line). So today the restore works wherever the primitive already resolves both renderings (no-pager, `--color`, single-column patched-delta, hyperlinks), and no-ops on side-by-side until §17.4 lands. The wiring here is complete and correct; the remaining gap is the shared SxS resolver, not this consumer. ### 18.4 Verification `build` / `format` / `lint` / `unit-test` green. Headless e2e: `diff/cycle_pagers` and `staging/diff_context_change` both pass (the former exercises the new call with `cat` / `cat -n` / default pagers and confirms the no-op fallback doesn't break cycling). **Interactive sign-off still pending** — as established (§13.1) the headless harness uses the cmd path, defers no `afterLayout`, and blocks `LAZYGIT_SLOW_RENDER`, so the pager re-render path and any flicker aren't reproducible there. Confirm with `just debug`, scrolled down, cycling between a side-by-side and an inline pager and between a `pager:` entry and an `externalDiffCommand` entry. --- ## 19. Session 9: alt/shift-click a diff line to jump to the editor A small standalone interaction, only loosely related to the rest of the branch: a modifier-click in the main view that opens the diff line under the cursor in the editor — without focusing the view, creating a selection, or being blocked by a popup. It's the gesture replacement for delta's clickable line-number gutter (`--line-numbers --hyperlinks`), whose three gripes were: a small/fiddly target, the horizontal space the gutter costs, and that it's only on added/context lines. **Interactively signed off** in Ghostty, iTerm2, and VS Code. Commits (most recent last): 1. *Let a mouse binding opt into firing while a popup panel is focused* — gocui. 2. *Extract editDiffLine from editLine* — prep refactor. 3. *Carry the keyboard modifier on mouse click events* — gocui fix. 4. *Alt- or shift-click a diff line to open it in the editor* — the feature. ### 19.1 Why alt + shift (the terminal wall) The original instinct was a single modifier-click or right-click; **a per-terminal probe killed every single-gesture option** (temporary instrumentation that logged raw tcell button+modifier for each click — removed after). The findings, which are the durable lesson here: - The only mouse input reliably delivered to a TUI is a **plain left-click** (and the wheel). Right-click is claimed for context menus (iTerm2, VS Code) or simply not forwarded; modifiers are stripped (Ghostty drops ctrl), repurposed for text selection (shift/alt bypass mouse capture), or promoted to a secondary click (macOS ctrl-click). The SGR mouse protocol can't even carry Cmd/Super. - **No single chord survives all three terminals.** Ghostty forwards alt (keeps shift for selection); iTerm2 forwards only shift; VS Code forwards both. So we bind **both alt-left and shift-left** to the same handler: whichever a terminal delivers fires the edit, the one it keeps for itself never arrives. (Right-click *does* reach Ghostty — see the bug below — but is unusable in iTerm2/VS Code, so it was dropped in favour of the alt/shift pair.) ### 19.2 The two gocui pieces - **Popup-bypass for mouse bindings** (`HandleWhenPopupPanelFocused` on `ViewMouseBinding`). Clicks on a non-popup view are normally swallowed by the `ShouldHandleMouseEvent` gate; hyperlink clicks already dodge it by being handled in an earlier phase. The flag generalizes that: flagged bindings are dispatched before the gate, so the edit-click stays live behind the commit-message panel (the case the gutter hyperlinks handled and the `e` keybinding can't). One flag on the producer; existing bindings stay oblivious ([[isolate-new-concepts-from-clients]]). - **Modifier-on-press fix.** A click is reported on the button *press*, but the driver only applied the keyboard modifier on *release* — which it turns into a discarded mouse-move. So modified clicks reached handlers stripped to a plain click; the alt/shift binding couldn't have matched without this. **Behavior change, global:** every modified click in every view now carries its modifier, so an unbound modified click is a no-op rather than silently acting as a plain click. Nothing in the tree bound a click modifier before, so nothing relied on the old behavior. (A *separate* latent bug surfaced during the probe and was **not** kept: the driver converts right/middle-button presses into mouse-move events, so they're never dispatched — fixable in ~3 lines if right/middle clicks are ever wanted.) ### 19.3 It's another diff-line-metadata consumer The handler resolves the clicked whole line via `StagingHelper.GetDiffLineInfo` (the same primitive the focused-main-view click/`e`/escape-restore use), then `Files.EditFileAtLine`. So it inherits the backends' fidelity exactly: full whole-line + deletion support under the OSC-metadata and no-pager/buffer-parse backends; the plain `--hyperlinks` backend only resolves lines that *carry* a hyperlink (added/context). So even before delta's gutter is turned off this beats the gutter click for those lines (whole line, behind popups); turning off `--line-numbers --hyperlinks` and relying on the metadata backend is what unlocks deletions and reclaims the gutter. ### 19.4 Productionization placement (planning hint) Land this as a **separate PR at the very end** of the productionization stack (§15's decomposition), after the focused-main-view feature and the diff-line primitive are in — it's an *additional consumer*, not a dependency of anything else, so it shouldn't gate the rest. Two of its commits are independently master-worthy and could even go ahead on their own, decoupled from the metadata work: the `HandleWhenPopupPanelFocused` capability and the modifier-on-press fix (the latter carries the global behavior-change note above, so flag it in its own PR description). Still pending for that PR: a confirming slow-render/interactive pass isn't needed (no async render path here), but it wants integration-test coverage like the rest of the focused-main-view interactions (§7 — none exist yet). --- ## 20. Session 10: the diff-line scan was O(n²) — batched to O(n) Also in this session: the space-selection and `-U`-preserve anchor both moved to the **middle visible line** (`gocui.View.MiddleVisibleLineIdx`: middle of the viewport when the content overflows it, middle of the content when it doesn't). Small and signed off interactively ("feels much better"). The substantial work was a performance fix. ### 20.1 The problem (user-reported) Changing the `-U` context size (`{`/`}`) or switching pagers (`|`/`\`) while scrolled down in a long diff was **extremely slow**: a 1700-line diff took ~2s with no pager / ~3s with delta; a 9600-line diff took ~33s / ~70s. Both consumers preserve the scroll position by scanning the re-rendered diff for the line to land on, so the cost was in the scan. The 5.6× line-count increase (1700→9600) gave a ~16× time increase — quadratic. ### 20.2 Root cause — three stacked O(n²) passes The position restore (§16.1) and the file/hunk navigation (§16.2) both resolve *every* rendered row's identity, and did so **one line at a time**: 1. **Per-line whole-section re-parse.** The buffer-parse backend (`parseDiffLineFromBuffer`) parses the target line's *entire* file section with `patch.Parse` on every call — O(n) per line for a single-file diff. It was called once per line in the incremental load scan *and* again in the EOF `Apply` scan (`FindDiffLine` from 0). Two O(n²) passes. 2. **Per-line full snapshot rebuild.** The incremental scan called `OffscreenDiffLineContents()` (rebuilds a snapshot of *all* loaded rows) after every loaded line — O(n²), and it hit *every* backend, including patched delta when scrolled to the end (so it wasn't just a no-pager problem). 3. (Wasted work for delta: the buffer-parse backend was attempted per line even when metadata/hyperlinks would answer.) Confirmed with a throwaway benchmark: a single whole-buffer scan of a synthetic single-file diff took 115ms at 1700 lines, 3.9s at 9600 — matching the user's wall-clock once the two-or-three stacked passes are accounted for. ### 20.3 The fix A single **batch resolver**, `StagingHelper.resolveDiffLines`, parses each file section exactly once (`parseAllDiffLinesFromBuffer` → `parseFileSection`/`fileSectionBounds`, extracted from the single-line parser so both share it — `parseDiffLineFromBuffer` now delegates to it) and applies the metadata/buffer/hyperlink precedence on top. All whole-buffer scans route through it: `nearbyDiffLines`, the EOF `Apply` (now `findResolvedDiffLine`, a pure scan over the resolved table), and **both** navigation scans (`AdjacentChangeBlock`, `AdjacentFile`) — which had the identical bug. O(n). The incremental load scan was made O(n) too: it now resolves only the rows that arrived since it last looked (`gocui.View.OffscreenDiffLineContentsFrom(from)` instead of re-snapshotting the whole off-screen buffer) and resolves each on its own via `diffLineInfoPerRow` (metadata/hyperlink only — the per-row backends). The buffer-parse backend can't resolve a partial diff anyway (the trailing hunk isn't well-formed mid-load), so it's no longer attempted during the load; the no-pager case still settles at the EOF swap (`firstPaint` → `Apply`), exactly as before — only the wasted O(n²) work is gone, the swap timing is unchanged. The single-line forward resolver (clicks/`e`/`enter`/PR, via `GetDiffLineInfo`) is behaviorally unchanged. ### 20.4 Verification - A throwaway test proved the batch parser is **byte-identical** to the per-line parser across a multi-file diff (incl. lines outside any section). A throwaway perf test showed the whole-buffer scan drop from **1.7s → 1ms** at 1700 lines and **~107s → 15ms** at 6800, linear in the line count. Both removed afterward. - `build` / `format` / `lint` (0 issues) / full `-short` unit suite / `diff`+`staging`+`cycle_pagers`+`diff_context_change` e2e all green. (`TestNewCmdTaskInstantStop` is the documented pre-existing flake — passes in isolation; tasks.go was not touched.) - Interactive: user confirmed "not entirely instant, but definitely good enough." This **retires the scan-cost productionization note** flagged in §14.5 and §16.4 (resolved in the prototype, per [[resolve-hard-unknowns-in-prototype]]). Commits (most recent last): *Add a batch buffer-diff parser that parses each file section once* (prep), *Add gocui accessor for the newly-loaded rows of an off-screen render* (prep), *Resolve diff lines in one batch pass instead of once per line* (the fix). (Plus the two middle-line commits.) ### 20.5 Follow-up surfaced by the speedup: a context-change flicker (no pager) — FIXED Changing `-U` context with **no pager** while scrolled down in the long diff showed a **pronounced flicker — a brief frame at a different scroll position, random run-to-run**; **not** reproducible with delta. The speedup didn't cause it — it *unmasked* it: the old O(n²) scan throttled the read loop so the load took ~33s, during which the old content sat stably on screen and hid the transient; once the load was instant, the transient stood out. **Pinned with the §10 `SetOriginY` tracer, at normal speed** (slow render would have hidden it — it re-stretches the load to a stable old-content frame). The log showed, every keypress, `SwapIn` then `SetOriginY` **~35ms later**: ``` .647 SwapIn new content displayed, oy still 10354 (the old scroll) .682 SetOriginY ->9865 Apply finally sets the preserved origin ``` **Cause:** `firstPaint` swapped the off-screen content in *then* ran `RenderRestore.Apply`, which for the buffer-parse backend re-scans the whole diff (the O(n) `resolveDiffLines`, tens of ms on a big diff) to find the line to land on. For that window the new content was displayed at the **stale** (now out-of-range) scroll; a layout draw landing there drew the bad frame. Delta didn't flicker because its metadata/hyperlink backend resolves the target *during* the load (`primaryBufferLine` set), so its `Apply` is instant — no scan after the swap. (My initial guesses — the loading-ticker `Reset`, or a render overlap — were both wrong; the tracer is what kept this from being a third §11-style misdiagnosis. The single-render path *was* clean; the bug was the scan on the wrong side of the swap.) **Fix (commit *Scan for the restore target before revealing the new content*):** `RenderRestore.Apply` now takes a `swapIn func()` and owns the swap — it resolves the target against the still-**off-screen** (and, at EOF, complete) buffer *first*, then calls `swapIn`, then settles the scroll. The scan runs while the previous content is still displayed, so the new content is revealed already at the right position — the same flicker-free shape the early-resolving backends always had. #### Productionization notes (keep in mind) - **The resolve-then-swap ordering is a real invariant of the restore mechanism, not an incidental tweak.** When the gocui async-render improvements are productionized (§15 decomposition (a)), `RenderRestore.Apply` must keep doing its target resolution against the off-screen buffer *before* swapping in. Reordering back to swap-then-resolve reintroduces the flicker for any backend whose resolution isn't instant (i.e. buffer-parse / no-pager). The read-loop unit test `TestNewCmdTaskRestore` guards this (asserts the render is *not* swapped in before `Apply` runs). - **A small post-swap window is irreducible in this design.** Mapping a matched buffer line to a view line (`ViewLineForBufferLine`) needs the wrapped view lines, which only exist after the swap, so the `swapIn → SetOrigin` step is necessarily post-swap (~1ms). Delta has the same window and it's imperceptible; not worth chasing to zero (would need swap+map+SetOrigin under one lock). - **General lesson for the async-render PR: making renders fast unmasks latent ordering/timing transients that slowness was hiding.** Re-test the restore consumers (escape, `-U`, pager-switch) at **normal speed** after any perf work; `LAZYGIT_SLOW_RENDER` *hides* this whole class by stretching the load back out. - The batch `resolveDiffLines` is O(n) and "good enough" (user-confirmed), but the §14.5/§16.4 *pinned-backend / incremental* optimization is still available if a very large changed diff ever lags: today it parses every file section even when metadata would answer, and re-snapshots per restore. --- ## 21. Session 11: merge staging + patch-building INTO the main view (the big reframe) A design discussion (no code yet). The realization that drives it: with the diff-line-metadata primitive (diff-line-metadata-notes.md), **the pager can now be used in the staging panel**, which was the long-standing blocker ("the staging panel needs to parse the diff; a pager breaks that, so I always said no"). And once that falls, a bigger one follows: if the staging view and the focused main view render identically and both carry a selection, **why have two views at all?** Fold staging *and* custom-patch-building directly into the main view — `space` stages the selected line/hunk/range in place, even in a multi-file diff. The separate `Staging`/`StagingSecondary`/`CustomPatchBuilder` views go away; `commitFiles` (and `files`) stay as *browsers*, but `enter` on a file just focuses the main view at that file's diff. This **changes the scope of the whole project**: the metadata primitive stops being a navigation nicety and becomes **load-bearing for core staging**. Decision (user, session 11): **prototype the whole package** rather than productionize the pre-session-11 state and defer the merge to a later release. The end state is far more coherent, and §15's stated reason for staying in prototype (make it a compelling OSC pitch) is *stronger* here — "stage against any conforming pager" beats "navigate a restructured diff" as a pitch. ### 21.1 The core insight: we never needed to parse the *rendered* diff The old "can't use a pager in staging" objection was a *parsing* objection, but the staging path never actually parsed the rendered bytes. `applySelection` (`staging_controller.go:237-281`) does: ``` state.SelectedPatchRange() → patch.Parse(state.GetDiff()).Transform({IncludedLineIndices}).FormatPlain() → ApplyPatch ``` `state.GetDiff()` is the **raw `git diff`**, which lazygit already holds in full — it's the very input it feeds to the pager. The rendered view was only ever used to **map the user's on-screen selection to patch-line indices**. That mapping is *exactly* the diff-line-metadata primitive (`GetDiffLineInfo`, `PatchLineForLineNumber`/`PatchLineForOldLineNumber`, the row→identity resolvers). So the new chain is: ``` rendered row → (file, type, new/old-line) [metadata] → patch-line index in the raw diff [PatchLineFor*LineNumber] → existing Transform / ApplyPatch ``` Every link except the selection model already exists and is tested. The raw diff is kept regardless of how it's rendered, so the patch arithmetic is unchanged. ### 21.2 Two risk tiers — don't lump staging and patch-building - **Staging merge (tractable).** The `Staging`/`StagingSecondary` contexts pass `getIncludedLineIndices: nil` (`context/setup.go:44-57`) — staging needs **no inclusion highlighting**. It needs only: range + hunk selection on rendered rows, `space`-to-stage, and the row→patch-line mapping above. Hunk boundaries are already derived from metadata (`AdjacentChangeBlock`, §16.2); the unstaged/staged split + `` already exists as `Normal`/`NormalSecondary` (§14.3). Bounded, mostly-built primitives. - **Patch-building merge (one genuinely new capability).** The `CustomPatchBuilder` view renders *itself* via `state.RenderForLineIndices(included)` → `FormatView` adds a green background to included lines (`patch/format.go:122-145`). **A pager precludes this** — the pager owns the bytes and knows nothing about inclusion state. So patch-building needs a **metadata-driven inclusion overlay** (§21.5), the single biggest *new* piece. Isolate it. ### 21.3 Resolved technical questions (grounded in the code) - **Transform copes with non-contiguous selections — confirmed by reading `transform.go`.** `Transform` tests `IncludedLineIndices` membership **per body line** (`lo.Contains`, `transform.go:150`); there is no contiguity requirement. Today's contiguity is purely the *caller* passing `ExpandRange(first, last)` (`staging_controller.go:252`). The `pendingContext` / `didSeeUnselectedNewFileLine` machinery (`transform.go:137-200`) exists precisely to handle a *partial* subset of a change block. Tracing the SxS case (select one side-by-side row = `{−deleted_1, +added_1}`, skipping `−deleted_2`/`+added_2`) yields a valid hunk: selected −/+ kept, the unselected deletion buffered as context after the addition. So the user's "collect all records on the row, union, feed to Transform" approach works **as-is**. - **SxS needs only an "all records on this row" accessor — NOT §17.4's row+column bucketing resolver.** Staging collects *every* metadata record on a selected rendered row and includes them all (left-column `d` + right-column `a` → stage both). You can't stage just one side in a side-by-side rendering; **accepted restriction** (uncommon; switch to a single-column pager or none to do it). This *downgrades* the §17.4 resolver: the heavy bucketing is only needed for the act-on-one-side gesture we're forgoing, so it gates **neither** staging nor patch-building. The light per-row collector covers both. - **Only change-line (+/−) indices are needed.** Context lines are emitted regardless of selection (`transform.go:152-157` doesn't check membership), so the new model can ignore context entirely when building the included set. - **Async post-stage selection: the *decision* stays synchronous.** "What's the next stageable hunk" is a patch-space computation over the new `git diff`, fetched synchronously on refresh (as `RefreshStagingPanel` does today). Only *revealing* it — scrolling the pager-rendered view there — is async, and that's the restore-by-identity consumer (#6) already built: compute the target identity from the new raw diff, install it as the pending restore, let the async render land on it. No new async machinery; it rides `restoreDiffLinePositionOnRerender`. - **Multi-file staging is structural.** Metadata carries `file` per row, the patch builder is file-keyed, and #1 already does multi-file splitting. A multi-file range just loops per-file `Transform`/`ApplyPatch`. New loop, bounded. ### 21.4 The metadata-reach boundary — the one real product unknown This is the part with no clean answer, and it's qualitatively different from everything before: until now every metadata feature was **optional** (old pager → lose the nicety, still use lazygit normally). Removing the staging panel makes a conforming rendering **required to stage at all**. The boundary, sharpened: - **First-class (no metadata pager needed):** no pager, `git diff --color`, `delta --color-only` (no line numbers) — all served by buffer-parse (#1). - **Served via metadata:** any restructuring pager that emits the OSC (patched delta/difftastic). - **The gap:** a **restructuring pager that does *not* emit metadata** (stock delta-default, diff-so-fancy, plain difftastic). Only this bucket loses staging. Fallback options for that bucket, none chosen (deferred past the prototype — depends on protocol adoption, and the prototype proves the concept with a conforming pager regardless): - *Keep the staging panel as a fallback* — user's verdict: **bad**, resurrects the whole second code path and forfeits the unification win. - *Render diffs without the pager when staging is possible* — note this is **not** a dynamic switch (staging is possible whenever the main view is focused, so it would fire essentially always / on focus, which is strange UX). Realistically it's a *static* "this pager can't emit metadata → lazygit never uses it for diff views," decided once — i.e. the user's restructuring pager is simply unused inside lazygit. A real loss, recorded honestly as an open question, not a clean fallback. - *Require a conforming rendering, hard* — simplest; excludes that bucket from staging. **This is the decision that most needs the user's judgement, and it can wait.** ### 21.5 The inclusion overlay (patch-building only) — reserved left column The new capability patch-building needs. Instead of `FormatView`'s first-char green background (impossible over pager output), lazygit paints **its own inclusion marker in a reserved left column**, driven by the per-row metadata identity checked against the included set. This stays **layout-agnostic** (works over any pager) and the user considers it a UI *improvement* over today's green overlay. - **The one-cell shift is intrinsic, not avoidable.** Staging the first hunk into a custom patch *is* what creates the patch (and the column); unstaging the last *is* what removes it. There is no persistent "patch-building context" to pre-reserve during — the operations enter/exit it implicitly. Reserving the column unconditionally in any view where a patch is *possible* would avoid the shift but is a worse trade. Verdict: shift is inherent, probably fine. - **Highest-uncertainty NEW piece**, and independent of the staging selection mechanics (needs only the metadata primitive + a gocui rendering change) → good early de-risk spike (§21.7 step 2). ### 21.6 Decided UX change: always show the selection, anchored at the first hunk Today the focused-main selection is **on-demand** (`space` toggles it, §4) and anchored at the **middle visible line** (§20). New model: **the selection is always shown**, and on focus it **starts at the first hunk** (exactly as entering the staging view does). This frees `space` for staging with no conflict, and is itself a **unification win** — the main view now behaves like the staging view (which always has a selection), the direction we're merging toward. - **Reverses two earlier decisions:** §4 ("`0` focuses with no selection / scroll mode; `space` toggles") and §20 (middle-line anchor). Scrolling still works with a selection shown (as in the staging view today); whether a no-selection scroll mode survives at all is a step-0 detail. - Applies only to **diff** main views (files / commits / commit-files / stash), **not** to non-diff main content (branch log, reflog, tags, …) where there is nothing to act on — there the selection stays off (refined session 11; the predicate is "is the main view showing a diff", e.g. via the side panel's `DiffableContext`-ness — confirm the exact seam during step 1). Within diff views `space` only *stages* where staging applies (files / commits-patch); `e`/`G`/`enter`, currently gated on "selection showing," become always available there. ### 21.7 The prototype sequence (linear — one session each, no parallel sessions) Dependency-first; the genuinely-unproven *capability* (the overlay) pulled early as a sequential de-risk spike. "Replaces the staging panel" milestone at step 5. - **Step 0 — Pin the interaction model + the selection-model fork (cheap, on paper).** Keys (`space` = stage/unstage, range-select, hunk-toggle, `` unstaged↔staged); fold in §21.6 (always-show selection at first hunk). The one real fork: **adapt `patch_exploring.State` to be backend-agnostic vs. build a fresh selection model on the main view keyed to rendered rows + metadata.** Lean: build-fresh, reusing State's hunk arithmetic — but decide deliberately, it shapes everything after. - **Step 1 — Single-line stage/unstage from the focused main view (working tree).** Smallest end-to-end proof of the thesis: rendered row → `(file, patch-line)` → `Transform` → `ApplyPatch`, no new selection model (single-line resolution already works). Retires the central unknown for almost no code. **Start here.** - **Step 2 — Inclusion overlay in a reserved column (de-risk spike).** The one new *capability*; independent of staging mechanics. Prove a metadata-driven left-column marker over pager output. Done early because it's the biggest unknown — if it fights us, we've spent little and learned the crux. (This is the "parallel" item from the discussion, run linearly.) - **Step 3 — Range + hunk selection, single-column.** Build the step-0 selection model; map a range/hunk → change-line index set → `Transform`. Validate on single-column renderings (no pager, unified metadata-delta), one record per row. - **Step 4 — Multi-record-per-row (SxS) + multi-file.** Add the "all records on the row" accessor (light SxS path, §21.3) and the per-file apply loop. Staging now works over any conforming rendering. - **Step 5 — Staged/unstaged split + post-stage reveal.** Stage from `Normal` / unstage from `NormalSecondary`, ``, synchronous next-hunk decision + restore-by-identity reveal. **Milestone: the working-tree staging panel is functionally replaced.** The escape-from-staging routing (§12.2 + the snapshot) starts dissolving here. - **Step 6 — Patch-building from the main view.** Reframe `PatchBuilder` interaction in identity terms; add/remove hunks from the commits/commitFiles main view, with step 2's overlay showing membership. - **Step 7 — `enter` on a file focuses the main view, for *both* `commitFiles` and `files`.** *(SUPERSEDED — DROPPED; see §21.24.)* The browsers stay; `enter` focuses the main view at that file's diff instead of opening a separate explorer. - **Step 8 — Tear out the separate explorer views + escape/snapshot machinery.** *(SUPERSEDED — DROPPED; see §21.24. The explorer views are kept on purpose as a testing reference.)* **Decision gate after step 2:** if the overlay is clean and step 1 confirms the core chain, the rest is bounded execution. ### 21.8 Decisions locked / open / memory - **Locked:** prototype the whole merge (don't stop-and-productionize first); SxS staging includes all records on the row (no single-side gesture); inclusion overlay = reserved left column (shift is intrinsic); selection always shown, anchored at the first hunk (reverses §4 + §20); step 7 covers `files` *and* `commitFiles`; linear sessions. - **Open (the real product unknown):** the §21.4 metadata-reach fallback for a restructuring-pager-without-metadata user. Deferred past the prototype; depends on OSC adoption. - **Carried forward:** the identity-restore machinery (`restoreDiffLinePositionOnRerender`) stays — staging mutates the diff, so "stay put after staging" is the same consumer, now *un*-entangled from a context switch. Concurrency stays mutex-based for now ([[main-thread-over-mutexes-direction]]). Keep new concepts off existing clients ([[isolate-new-concepts-from-clients]]). Resolve the overlay unknown in the prototype ([[resolve-hard-unknowns-in-prototype]]). ### 21.9 Session 12 (2026-06-18): Step 1 implemented + findings Steps 1+2-worth of behavior built (uncommitted, all green): **always-show selection in diff views, anchored at the first visible change line**, and **single-line directional staging on `space`**. Two corrections applied from interactive feedback: the predicate became the `types.DiffMainViewContext` marker interface (tagged on Files/LocalCommits/SubCommits/Stash/CommitFiles/ReflogCommits — *not* the `GetOnClickFocusedMainView`-sniffing first cut, which conflated "stageable" with "shows a diff"; reflog shows a diff via `git show` but isn't stageable), and the `0` anchor became "first change line at or below the viewport top" (`FirstChangeLineInView`) rather than jumping to the diff top. **Signed off as good-enough:** the `0`-while-scrolled anchor (will change anyway once hunk selection lands and is on by default); the one-hunk-stage case (only the tab title + the files-panel ` M`→`M ` status change — identical to pressing `space` on the file in the files panel, so fine). **Fixed this session:** `` between the unstaged/staged panes left *no* selection in either (leaving pane cleared `Highlight`; landing pane established none). Now `togglePanel` anchors the landing pane on its first visible change line via a shared `showInitialDiffSelection` helper (also used by `focusMainView`). Per-pane selection *memory* (like the staging view keeps) is not done — we re-anchor on each switch; fine for now. **The big-picture caveat the user raised:** Step 1 alone is *not* a usable experience — single-feature increments don't become testable until range/hunk selection (Step 3, hunk-select on by default) and the selection-lifecycle polish are in. Expect more rough edges to surface as we go; the ones known so far are below. **Two findings to carry forward (not fixed now):** - **The `GetOnStageFocusedMainView` handler-channel doesn't scale (architecture debt, revisit for the real implementation).** The staging panel has *many* commands beyond `space` (`d` discard a hunk, edit, and more); routing each through its own side-panel handler channel (interface method + `BaseContext` field + `attach.go` registration + `baseController` default) is too much boilerplate per command. Accepted as a prototype expedient (user OK'd continuing for now), but the real design wants a better mechanism — e.g. the focused main view *hosting* the patch-explorer command set directly, or a shared staging-command controller bound to the diff main contexts, rather than N bespoke delegation channels. Flag for Step 8 / productionization. - **Delta's background-conveyed side is invisible under the selection highlight (usability, future).** delta indicates added/deleted/context purely by background colour, and the selection takes over the background — so you can't tell what kind of line is selected. Needs a different way to mark the selected line(s) (e.g. a gutter marker, a foreground/border treatment, or reserving a column — cf. the §21.5 inclusion overlay, same class of problem). Not for this prototype; keep in mind. **Resolved §21.34** (`narrowSelectionHighlight`: a narrow selection bar at the left edge only). ### 21.10 Step 1 committed; Step 3 design settled, fold done (resume here) **Committed (branch, not pushed), most recent last:** ``` f660567cb Extract diffSplitState from the files diff renderer (prep) d196d4e78 Stage the selected diff line from the focused main view (step 1: always-show selection at first visible change + single-line directional staging + the fix) d0f72cfb8 Session notes: plan to merge staging into the main view, and step 1 4fab0a7c6 Fold ViewSelectionController into MainViewController (step 3 prep) ``` So **steps 1 + 2-of-the-plan are done** (always-show selection + single-line staging), and **step 3's prep is done** (the `ViewSelectionController` fold). `build`/`lint`/`unit-test`/`format` green throughout; `just generate` was run for the keybinding cheatsheets. Not interactively re-tested since the `` fix. **Step 3 design — SETTLED, ready to build (the feature increment):** range + hunk selection in the focused main view, built fresh (own type, not shared with `patch_exploring.State` — the explorer is going away, so the temporary duplication is fine). Grounded findings: - **gocui renders a range selection natively** — `View.SetRangeSelectStart(y)` + `Highlight` + cursor highlights the span (`view.go:607-615`); `CancelRangeSelect()` resets. So LINE = cancel range-select (cursor highlight); RANGE/HUNK = range-select from anchor to cursor. **No new highlight machinery.** - **Mirror the staging mode machine** (`patch_exploring/state.go`): `selectMode` (LINE/RANGE/HUNK), sticky vs non-sticky range, `userEnabledHunkMode` (config-default hunk vs user-toggled — matters for escape), default HUNK when `UseHunkModeInStagingView && !IsSingleHunkForWholeFile`. Reimplement in **view-line space** with hunk bounds from the **metadata `isChange` array** (reuse `resolveDiffLines`/`changeBlockStart`/`AdjacentChangeBlock`), **not** `patch.Lines()`. - **State home:** fields on `MainViewController` (two instances — Normal & NormalSecondary — each owns its mode). The nav handlers (`handleLineChange` etc.) now live there (the fold), so mode-aware ↑/↓ has its home. - **↑/↓ are already selection-move** (the folded `handleLineChange`: Highlight → move selection, else scroll). Extend: **hunk mode → move to prev/next hunk** (`AdjacentChangeBlock`); line mode → by line (today); range mode → extend. `a` (`Main.ToggleSelectHunk`) toggles to line mode for line-granular movement. - **Keys to add, mirroring staging:** `Universal.ToggleRangeSelect` (`v`, sticky range), `Main.ToggleSelectHunk` (toggle hunk/line), `Universal.RangeSelectUp`/`RangeSelectDown` (shift-↑/↓, extend non-sticky range). ``/`` hunk nav + `n`/`N` file nav already exist. - **Config default:** select the first *visible* hunk on focus when hunk mode is the default (grow `FirstChangeLineInView`/`showInitialDiffSelection` to expand to the block bounds, not just the first change line). - **Range-aware staging:** `GetOnStageFocusedMainView` currently takes a single `viewLineIdx`; make it take the selected row range (or read the view's range-select), collect the change-line patch indices across the rows, and apply **one** `Transform` with the set (`Transform` already handles arbitrary/non-contiguous index sets — §21.3). Side-by-side "all records on a row" is still step 4; step 3 stays single-column. Suggested commit shape for the feature: it may split into (a) mode state + rendering + mode-aware nav + keys (the selection model) and (b) range-aware staging — or land as one feature commit; decide when the diff takes shape. ### 21.11 Session 13 (2026-06-18): Step 3 implemented + committed (range + hunk selection) **Committed (branch, not pushed), most recent last:** ``` c4827a269 Select and stage ranges and hunks from the focused main view (the feature: selection model + range staging) a9eee242a Select the first hunk when focusing the main view in hunk mode (the config-default-on-focus) ``` Landed as **one feature commit + one default-on-focus commit**, not the (a)/(b) split: the selection model and range staging are coupled (a hunk you can select but `space` stages only one line is an incoherent intermediate — the no-regression rule), so they go together. The hunk-default-on-focus is genuinely separable and came second. **How the settled design actually landed:** - **State home = MainContext, NOT MainViewController** (deviates from §21.10; decided with the user — [[diff-selection-state-home]]). `MainContext.DiffSelectState()` holds `{Mode (Line/Range/Hunk), RangeIsSticky, UserEnabledHunkMode}`. Reason: three sites need a pane's mode (the controller, `focusMainView`, and `togglePanel` setting the *other* pane) and only the context is reachable from all three. Mirrors how `patch_exploring.State` lives on the patch-explorer context. - **No new highlight machinery, confirmed.** The selected line + range anchor stay in the gocui view (cursor + `rangeSelectStartY`); the controller only flips the mode and re-derives the view's range. LINE = `CancelRangeSelect`; RANGE = anchor fixed, cursor is the moving end; HUNK = cursor on the block's first line, anchor on its last (so the cursor sits at one end — gocui can't highlight a block with the cursor in the middle; invisible anyway since the whole block is highlighted). Block bounds come from the metadata `isChange` run via a new `StagingHelper.ChangeBlockBounds` (view-line space, reuses `resolveDiffLines`), never `patch.Lines()`. - **Mode-aware nav:** ↑/↓ — hunk mode steps hunk-to-hunk (`AdjacentChangeBlock`), a non-sticky range collapses on a plain move, a sticky range extends. ←/→ (hunk nav) and n/N (file nav) already existed and now re-expand in hunk mode. Pages/top/bottom drop hunk mode + collapse non-sticky range, like the staging view's `AdjustSelectedLineIdx`. - **Keys added:** `v` (`ToggleRangeSelect`, sticky), `a` (`ToggleSelectHunk`), shift-↑/↓ (`RangeSelectUp/Down`, non-sticky extend). Clicks reset to a single-line LINE selection. - **Range-aware staging:** `GetOnStageFocusedMainView` signature changed from one `viewLineIdx` to `(firstLineIdx, lastLineIdx)` (the view's `SelectedLineRange`). `StagingHelper.ChangeLinesInViewRange` collects the change lines across the rows; `FilesController.stageDiffLines` applies **one** `Transform`. **The one real surprise — patch-line resolution had to change (`PatchLineFor*LineNumber` is the wrong primitive for ranges).** Resolving each selected change line's patch index with `PatchLineForLineNumber(newLine)` / `PatchLineForOldLineNumber(oldLine)` is quirky at hunk boundaries: it returns the @@ header for a change on the *first* line of a hunk (no leading context — e.g. a change on line 1 of a file), and for a *modified* line (a `-`/`+` pair) the new-line lookup lands on the deletion, not the addition. A range routinely spans both. Fix: `stageDiffLines` keys each selected change line by `(file line number, deletion?)` and **scans the parsed patch**, matching body lines by identity via the quirk-free inverse maps `LineNumberOfLine` / `OldLineNumberOfLine`. Side effect: this also **fixes staging a change on the first line of a file** (a latent step-1 bug in the single-line path, which used the same primitive). Folded into the feature commit because robust resolution is *required* for ranges, not optional polish. **Tests (all green; full `e2e-all` green):** `stage_range_from_main_view` (range over a deletion + its replacement + context, exercising the resolution fix), `stage_hunk_from_main_view` (`a` toggle from line mode, hunk-off config), `select_hunk_on_focusing_main_view` (hunk-default-on-focus selects the first block). **Deferred / open (carry forward):** - **Post-stage selection isn't re-anchored** — after `space` the diff re-renders and the cursor/range are left where they were (stale). This is the step-5 "post-stage reveal" (restore-by-identity, consumer #6); not done here, matches step 1's level. Known rough edge; the tests stage from a fresh focus to stay deterministic. - **`IsSingleHunkForWholeFile` refinement skipped.** Hunk-default-on-focus keys purely off `UseHunkModeInStagingView`, so a whole-file-single-block diff (new/deleted file, no context) defaults to hunk = select-everything rather than dropping to line mode like the staging view. Computing it from metadata at focus (diff maybe multi-file / still streaming) is awkward; deferred. - **SxS multi-record-per-row + multi-file staging = step 4** (unchanged). Step 3 stays single-column, single-file (`stageDiffLines` bails on a directory node). - **Unstage-from-secondary via the main view** (`` to NormalSecondary, `space`) reuses the same path with `reverse=true` but wasn't interactively/e2e verified this session. - **Interactive sign-off pending** (per §21.9, single increments only become testable once this is in; the user evaluates the feel — e.g. hunk-default jump-on-focus, delta's background-conveyed side under the highlight per §21.9). **Interactive feedback, session 13 (user; both OK to leave for now):** - **delta + hunk selection makes the §21.9 colour problem worse.** With a whole hunk selected you see one solid block of blue with no boundary between the deleted and added lines — delta conveys add/delete purely by background, which the selection overrides. Worse than the single-line case. Still deferred (same class as the §21.5 overlay — a gutter marker / foreground treatment / reserved column is the eventual answer). **Resolved §21.34.** - **`a` on a context line below the last hunk diverges from the staging panel.** The staging panel selects the *last* hunk (searches backward when there's nothing forward); ours keeps the single line (`ChangeBlockBounds` only snaps *forward* to the first block at/after the anchor, finds none, falls back to a single-line selection). Minor; to match, `ChangeBlockBounds` would fall back to the nearest block *above* when none is at/below. ### 21.12 Session 13 (cont.): Step 4 done — SxS multi-record + multi-file staging **Committed (most recent last):** ``` 533046c5e Stage a selection spanning several files from the focused main view (multi-file) c63266113 Stage both sides of a side-by-side row from the focused main view (SxS multi-record) ``` Built **multi-file first** (testable), then **SxS** (interactive-verify only), per the user's call. Both green; full `e2e-all` green. - **Multi-file.** The focused main view of a directory node already renders a multi-file diff (`WorktreeFileDiffCmdObj` takes a directory). Dropped the `!node.IsFile()` bail; the handler now groups the selected change lines by `info.Path`, maps each path back to its `models.File` via `FileTreeViewModel.GetFile(ToSlash(rel(WorktreePath, absPath)))`, and applies one patch per file. `stageDiffLines` no longer logs/refreshes — the handler does both once around the batch. Direction is uniform (the whole diff is one side), so it's decided once. Single-file now goes through the same path-lookup (no special-case), exercised by the existing step-3 tests. New test: `stage_range_spanning_files_from_main_view`. - **SxS multi-record-per-row.** `gocui.DiffLineContent.Metadata` keeps only the *first* payload per row — drops the right side of a side-by-side row. Added `View.DiffLineMetadataPayloads() [][]string` (distinct payloads per buffer line; new accessor, left the single-payload one for the nav/restore consumers per [[isolate-new-concepts-from-clients]]). `ChangeLinesInViewRange` now resolves *all* a row's payloads when it has metadata, else falls back to the single resolved record (no-pager / buffer-parse / hyperlink) — so single-column is unchanged. Both sides of a SxS row stage together (can't stage one side; accepted §21.3 restriction). **Not e2e-testable** (harness has no real delta SxS); covered by a gocui unit test `TestDiffLineMetadataPayloads` for the accessor; the full chain needs interactive sign-off with the patched delta in SxS mode. **Interactive sign-off, session 13 (user):** - **Steps 3–4 staging verified good**, including **SxS staging from BOTH patched delta AND difftastic's side-by-side view** — so the per-cell multi-payload path holds across both conforming pagers, not delta-specific. - **Unstaging works but loses the selection / has focus problems** (user's words). Expected to be resolved by step 5 (the post-stage reveal + selection lifecycle). Concrete repro cases not yet captured — get them at step-5 start to target the exact symptoms rather than guessing. **NEXT: step 5** — staged/unstaged split + post-stage reveal (stage from Normal / unstage from NormalSecondary, ``, synchronous next-hunk decision + restore-by-identity reveal). **Milestone: the working-tree staging panel is functionally replaced.** This is where the deferred post-stage selection re-anchor (§21.11) AND the just-reported unstage focus/ selection-loss both land. ### 21.13 Session 13 (cont.): Step 5 part 1 — post-stage reveal (selection advances) **Committed:** `c0c91d10b` Advance the selection to the next change after staging from the main view. Fixes the user-reported "selection lands outside the content / looks like there's none" after stage/unstage. `MainViewController.stageSelectedLine` now installs a restore (`StagingHelper.RevealSelectionAfterStaging`, sibling to `RestoreFocusedMainViewOnEscape`) *before* the handler triggers the post-stage re-render. Candidates, priority order: change block after the selection → before it → the acted-on line itself (only survives the all-staged flip). Rides the existing `restoreDiffLinePositionOnRerender`. Re-selects in the current mode (hunk → walks hunk-to-hunk); a range collapses to a line first (staging consumes it). Works for both stage (from Normal) and unstage (from NormalSecondary) — same code path, `reverse` differs. Tests: `select_next_hunk_after_staging_from_main_view`, `select_next_hunk_after_unstaging_from_main_view`. Full `e2e-all` green. **Part 1 signed off (session 13, user): "selection invisible" symptom gone, works very well.** **Step 5 part 2 — STILL OPEN, and it UNIFIES with a bug the user found while testing.** Both are the same issue: *after stage/unstage, focus should follow the side you were acting on, but doesn't.* - **User-reported bug:** a file with **only staged changes** → `Normal` shows the *staged* diff (`mainShowsStaged`, no split). Unstaging the *first* hunk makes the file staged+unstaged → split appears → `Normal` flips to show *unstaged* and the staged content jumps to `NormalSecondary`, but focus stays on `Normal`. Wrong: should stay with the staged content (i.e. follow it to `NormalSecondary`) until it's empty. - **The original part-2 case:** unstaging the *last* staged hunk from `NormalSecondary` empties the staged side → split collapses → `NormalSecondary` hides, focus stuck on it. **Why they're one issue:** the staging *view* has fixed panes (Staging=unstaged, StagingSecondary=staged) so focus-follow is trivial; the merged `Normal` shows *either* side (per `mainShowsStaged`), so a stage/unstage that changes the split reassigns which pane holds the side you care about. **Unified rule:** after the op, focus `NormalSecondary` iff (unstaging AND post-op state is split), else `Normal`. Covers the bug (only-staged → unstage one → split → NormalSecondary), original part 2 (unstage last → no split → Normal), and all stage cases (→ Normal). Stage-everything-from-Normal is already fine (Normal flips to staged via `mainShowsStaged`; part-1 reveal's self-candidate lands there). **Why it's not a quick patch — the async coordination:** the reveal must ride the post-stage re-render, so the target pane must be known *before* the re-render fires; but the split state is only known *after* `Refresh` updates the model. **Open Q to resolve FIRST next session:** is the post-`Refresh` main-view re-render *queued* (runs after `stageSelectedLine` returns) or synchronous? If queued, install the reveal + switch focus *after* the handler (model updated → split known) and it still rides the queued render. If synchronous, need a different hook (e.g. predict split, or restructure so `stageSelectedLine` owns the refresh). The fix belongs in the **stage flow**, NOT `FilesController.GetOnRenderToMain` (broad callback, fires unfocused). Deferred for fresh budget — subtle async work, long session. **Usability note (user, don't fix now — possible future special-case):** in a multi-file diff containing a **deleted file**, stepping through hunks and staging them stages the deletion of the file's *content* but not the *file entry* → you land on `MD` status, not `D`. Same as the staging panel could produce, but there you had to deliberately enter staging on the deleted file, so it was unlikely; here it happens easily. Consider special-casing: when a deleted file's *entire content* is selected/staged, stage the file deletion itself (→ `D`). Belongs near the per-file apply loop in `stageDiffLines`/the handler. ### 21.14 Session 14 (2026-06-18): Step 5 part 2 done — focus follows the acted-on side **Milestone reached: the working-tree staging panel is functionally replaced.** Committed (most recent last): ``` e36b6ceaa Let the post-stage reveal target a different pane than the one acted on (prep) 2b3ac3017 Follow the acted-on side to the right pane after staging from the main view (behavior + tests) ``` **Open Q resolved: the re-render is QUEUED, the model is updated SYNCHRONOUSLY.** The handler (`FilesController.GetOnStageFocusedMainView`) calls `Refresh({FILES, STAGING})` in the default **SYNC** mode, whose files goroutine updates `Model().Files` + `SetTree()` synchronously and is `wg.Wait()`ed on — so by the time the handler returns, `node.GetHasStagedChanges()` / `GetHasUnstagedChanges()` (hence `diffSplitState`) reflect the post-op state. But the *main-view re-render* is deferred: `refreshFilesAndSubmodules` → `OnUIThread(refreshView(Files))` → `OnUIThread(postRefreshUpdate(Files))` → (we're focused on a `NORMAL`/`NORMAL_SECONDARY` context, so [`view_helpers.go`] `postRefreshUpdate` line ~146 takes the `NextInStack` branch) → `Files.HandleRenderToMain()` → `FilesController.GetOnRenderToMain`'s closure renders both panes. All on later UI-loop iterations, after `stageSelectedLine` returns. So §21.13's "if queued" branch holds: **decide focus + install the reveal after the handler returns; the reveal rides the queued render.** **The unified rule (as predicted in §21.13), implemented:** the handler returns the focused-main view name that should hold focus — `NormalSecondary` iff (unstaging **and** post-op split), else `Normal` — and `MainViewController.stageSelectedLine` re-selects in that pane and `Push`es it. The decision is files-specific (reverse + split), so it lives in the handler; the GUI mechanics (focus switch, select mode, reveal install) stay in the controller. The `onStageFocusedMainViewFn` signature gained a `(focusViewName string, err error)` return; `""` = nothing staged (skip the reveal — also fixes a latent part-1 wart where a no-op stage left a lingering restore). **The cross-pane wrinkle (decision I made; wasn't fully spelled out in §21.13):** when focus crosses to the other pane, the **selection follows too** — a focused pane with no selection is exactly the "invisible selection" bug part 1 fixed. So the reveal's candidate change lines are read from the pane we **acted in** (still showing the pre-staging diff until the queued render), but the restore is installed on, and re-selects in, the **target** pane. Two enabling pieces, in the prep commit: - `RevealSelectionAfterStaging(sourceView, targetView, …)` — candidates from `sourceView`, restore on `targetView`. Identity matching survives the stage/unstage flip because `SamePatchLine` keys on (path, source-line, isDeletion) — **not** the staged/unstaged side — so a staged hunk's identity is found again in the unstaged re-render and vice-versa. - **Get-or-create the target's buffer manager** (`GetOrCreateViewBufferManagerForView` on IGuiCommon → `gui.getManager`). The only-staged→split case focuses `NormalSecondary`, which may never have rendered, so its manager doesn't exist yet; `SetRestoreForNextTask` needs it to exist before the queued render reuses it. Verified safe to pre-create: a fresh manager is `!IsLoading()` and its `ReadLines` no-ops (nil `readLines` channel), so the layout clamp ([`layout.go`]) behaves identically. The target also inherits the source's `DiffSelectState` (line/hunk mode) via a struct copy (`*target = *source`; a no-op self-copy in the same-pane case). **`Push`ing a MainContext is render-safe:** Normal/NormalSecondary have no `onRenderToMainFn` (SimpleContext.HandleFocus only fires `onFocusFns` for them — `GetOnFocus` resets `HighlightInactive`), so the focus switch can't render prematurely or consume the restore. The queued `postRefreshUpdate` does the render, and `NextInStack(NormalSecondary)` is still Files, so both panes re-render. **Tests (both cross-pane; same-pane cases already covered by the part-1 tests):** `focus_follows_staged_side_to_secondary_after_unstaging` (the user-reported bug: only-staged → unstage first hunk → split → focus + selection move to `Secondary` on the next staged hunk) and `focus_returns_to_main_after_unstaging_last_staged_hunk` (original part-2: unstage the only staged hunk from `Secondary` → split collapses → focus + selection return to `Main` on the now-unstaged change). Full `e2e-all` green (incl. the previously direnv-flaky worktree test), `unit-test` + `lint` clean. **Interactive sign-off pending.** Not yet eyeballed in the real app. Worth a live pass on: the two cross-pane cases above; the same-pane cases still feel right; and the **multi-file directory diff** focus-follow (handler reads the *directory* node's aggregate split — should be correct but isn't e2e-tested). The SxS/delta paths aren't affected by this change (focus logic is pager-agnostic), but a quick confirm doesn't hurt. **Still open (unchanged):** the deleted-file usability note above (`MD` vs `D`); §12.2's custom-patch-builder escape routing is a *patch-building* concern, not part of the merged working-tree staging milestone. ### 21.15 Session 15 (2026-06-18): rebased onto the wrapped-fill branch; two step-5 reveal bugs fixed Step-5-part-2 interactive testing surfaced two bugs, both fixed. First, though, the prototype was **rebased onto master after merging `fix-coloring-of-wrapped-delta-lines`** (the `lineType` struct, sentinel removal, draw-time `trailingFillAttributes` fill). The user dropped that branch's "inline finishLine" commit so `finishLine` survives as the home for the metadata fix below ([[clean-history-no-back-and-forth]]). **Bug 1 — blank changed lines lost their metadata under delta (commit `03b747739`).** With a **colored** input diff (which lazygit feeds delta via `--color=always`), delta renders some blank deleted/added lines as just the OSC 1717 metadata + an empty line — either no fill at all, or a background + `ESC[0K` that the wrapped-fill branch now turns into a draw-time attribute rather than content cells. Either way the line has **no cells**, so its metadata had nowhere to live and the line resolved to "not a change" — splitting a hunk at the blank line (`0` selected only the part above it). Fix: `finishLine` keeps a content-less sentinel cell **only when there's pending OSC metadata** to carry (not the old unconditional sentinel + `prevFgColor` coupling that `7dc18f3eb` removed). Reproduced offline only after matching the real pipeline exactly: **colored** git diff, `TERM=dumb`, truecolor (`COLORTERM` is passed through to the pager — lazygit strips only `TERM*`), and a `gocui.View` in `OutputTrue` mode. (256-color SGR leaking was a *test artifact* of using `OutputNormal`; under `OutputTrue` it parses fine, so no real gap. `swallow-unknown-escape-sequences` is orthogonal — it stops *unknown* sequences leaking under lower modes.) **Bug 2 — the post-stage reveal jumped to an earlier hunk (commit `9fb3c11cc`).** The reveal captured the next/prev change block as a patch identity and matched it in the re-render via `SamePatchLine`, which keys a **deletion** on its **old-file (index) line number**. Staging a hunk that changes the line count shifts the index-side numbers of every hunk below it, so a deletion-led "next hunk" candidate no longer matched; the reveal fell back to a worse candidate, often colliding with a header/context row (`findResolvedDiffLine` didn't require a change line) and, in hunk mode, snapping to the *first* change block — i.e. an earlier hunk. (Proven by instrumenting the match: candidate `-e` was `{NewLine:7, OldLine:5}` pre-stage, `{NewLine:7, OldLine:7}` post-stage.) Fix: a **reveal-specific matcher `matchByWorktreeChange`** — match a change line by its worktree (new-file) number, which staging never moves, requiring the same side. Safe because the reveal only targets change blocks and `selectHunkAround` expands the whole block, so the new-file number's consecutive-deletion ambiguity (the reason `SamePatchLine` uses old-file) doesn't matter. The matching is now a `diffLineMatch` parameter of `restoreDiffLinePositionOnRerender`; the **escape restore and `-U` preserve keep `matchByPatchLine`** (same staged state → no shift; `-U` deliberately anchors on context lines). Regression test: `advance_to_next_hunk_after_staging_shifts_line_numbers` (lands on the earlier hunk without the fix). The escape restore has the same staging-shift exposure but is **left as-is** — it dissolves with the staging panel when this feature lands. **Also:** a latent bug the prototype's off-screen render exposed in the rebased wrapped-fill code — `parseInput` wrote `trailingFillAttributes` to `v.buf` instead of `b` (wrong buffer during an off-screen render; could panic). User fixed it (`ba3389562`, fixup). **Status:** all three repos' tests green (`unit-test`, `e2e-all`, `lint`). Step-5 staging now holds up under delta on diffs with blank changed lines and line-count-changing hunks. User to re-test for any remaining reveal misfires (their original report predates both fixes). ### 21.16 Session 15 (cont.): line-mode reveal — advance to the next line, not the next block Hunk-mode reveal signed off as perfect after §21.15. **Line mode** had a remaining bug (user: "kind of important"): staging the first line of a multi-line block jumped to the *next block* instead of the next (now first) line of the *same* block. Cause: the reveal's primary candidate was `AdjacentChangeBlock` (next change *block*), which skips the rest of the acted-on line's block — right for hunk mode (whole block staged), wrong for line mode (one line staged, rest remains). Fix (`cb784bde3`): new `AdjacentChangeLine` (first change line strictly after/before the selection) for the next/prev candidates. Unifies both modes — after a whole block (last line followed by context) the next change line *is* the next block's first line, so hunk mode is unchanged; after a single line it's the next line of the same block. `place` stays mode-aware (hunk-expand vs single line). Regression test `select_next_line_after_staging_line_from_main_view` (note: line mode needs `UseHunkModeInStagingView: false` — hunk mode is the default). All green. ### 21.17 Session 16 (2026-06-19): reveal reworked to preserve the change-line ordinal Two more reveal bugs (user, line mode): staging a deletion in the *middle* of a deletion block jumped to the block's first line; and unstaging a modification's deletion jumped back to an earlier block. Root cause (confirmed by instrumenting the matcher): **no line-number identity is stable AND unique across a stage.** Deletions in a block all share the same new-file number (so matchByWorktreeChange's findResolvedDiffLine returned the first); and in the **staged** pane the new side is the index, which staging/unstaging shifts, so an addition candidate's new-file number moves and the match misses → falls back to a prev-block/header. The §21.15 worktree-line match and the §21.16 adjacent-change-*line* each fixed one case and left another. **Fix (`cd27c07e2`): preserve the selection's ordinal among change lines** — exactly what the staging view does with its patch-line index. Read the acted-on line's change-line ordinal from the source pane before the op; after the re-render, select the change line at that ordinal in the target pane (clamped to the last). The op removes the acted-on change line(s), so that ordinal then holds the next surviving change (next line of the same block, or next block when a whole block was staged). No reasoning about which side's numbers are stable → deletions and the staged pane are handled uniformly. `matchByWorktreeChange` and `AdjacentChangeLine` are gone; the identity restore (escape, -U) and the new positional restore now share an extracted `installDiffLineRestore`. Regression tests `select_next_deletion_after_staging_within_a_block`, `select_next_change_after_unstaging_a_deletion`. All three repos green. **Open nuance — the collapse case.** When the acted-on side *empties* (e.g. unstage the last staged hunk → focus moves to the unstaged pane), the source and target are now *different* diffs, so the preserved ordinal lands on whatever change sits at that ordinal in the other side rather than specifically on the just-acted line. `focus_returns_to_main_after_unstaging_last_staged_hunk` still passes (there the just-unstaged change *is* the first one), but it'd differ if a pre-existing unstaged change sat above it. Left as-is pending the user's call; restoring the old self-identity behavior there would need a "the acted-on side emptied" signal threaded from the stage handler. **History note:** `cd27c07e2` supersedes the *mechanisms* of `cb784bde3` (§21.16) and `9fb3c11cc` (§21.15) — both their matchers are deleted here, though their tests survive. The three reveal commits would collapse cleanly into one if the user wants to rewrite (their call). ### 21.18 Session 16 (cont.): step 5 signed off — MILESTONE reached; step 6 next (new session) **Step 5 fully signed off (user): "works perfectly."** The working-tree staging panel is now functionally replaced by the focused main view — single-line / range / hunk / multi-file / SxS staging and unstaging, the staged/unstaged split with focus following the acted-on side, and the post-stage reveal (change-line-ordinal model, §21.17) all working under delta, including the collapse case (acted-on side empties → jump to the first change of the other pane; confirmed fine, matches the old staging panel — no change wanted). **NEXT: step 6 — patch-building from the main view (a new session).** This is the higher-risk tier (§21.2): commits / commit-files panels build a *custom patch* rather than staging, which needs the metadata-driven **inclusion overlay** (§21.5) — the reserved left column showing which lines are in the patch — the one genuinely new capability and the highest-uncertainty piece. Start from §21.5 + the §21.7 plan. After step 6: step 7 (enter focuses the main view for files AND commitFiles), step 8 (tear out the explorer views + escape machinery). ### 21.19 Session 17 (2026-06-19): step 6 design + plan (the inclusion gutter) The §21.7 **step-2 de-risk spike (the inclusion overlay) was skipped** — the implementation sessions ran 1 → 3 → 4 → 5. So step 6 is two pieces: (1) the inclusion overlay (§21.5) — the genuinely-new capability, never built — and (2) the patch-building toggle handler. **The shaping insight — staging is async, patch-building is sync.** Staging mutates the diff → the content re-renders (async) → the post-stage reveal rides that render (`RevealSelectionAfterStaging`, ordinal model, §21.17). **Patch-building mutates only the inclusion set — the commit's diff is unchanged — so there is no content re-render.** Toggling a line into the patch just recomputes the gutter, redraws, and advances the selection, all **synchronously**. Re-running the pager per toggle is exactly what the draw-time gutter exists to avoid (§21.5). So `space` in `MainViewController.stageSelectedLine` branches on the panel beneath: files → stage (async, exists); commits/commitFiles → toggle patch (sync, new). The selection front end (`ChangeLinesInViewRange`) is shared; only the back end and post-action differ. **Included-set mapping (solved on paper).** `PatchBuilder` stores `includedLineIndices` (patch-line indices into the file's parsed diff). Invert `stageDiffLines`: parse the same diff, map each included index → change-line identity `(path, lineNumber, isDeletion)` via `LineNumberOfLine`/`OldLineNumberOfLine`, build a set, check each rendered row's resolved identity against it. Rendering-independent, so it holds over delta / no-pager identically. (`mode == WHOLE` = all change lines included.) **Gutter decisions (user, this session):** - **On-demand.** The gutter is shown **only while a custom patch is being built** for the shown commit; hidden otherwise. The diff renders flush-left until the first line is toggled in (the intrinsic one-cell shift, §21.5), and goes away when the patch empties. - **Inclusion-only.** It is **not** the fix for the §21.9 selection-bg-under-delta problem: staging from the files panel never has a gutter yet has the same problem, so that needs a *separate* solution (deferred). (This corrected a wrong framing — the two were lumped as "same class of problem" in §21.9/§21.11; they are not solvable by the same gutter.) - **Marker = a checkmark** (maybe colored). `+` is out — it collides with raw `git diff`'s `+` for additions (delta has none). Trivial to change later; don't over-invest now. **gocui rendering (the de-risk spike).** Both main views are `Wrap=true` (so `ox` is pinned to 0 — no horizontal-scroll complication). The gutter is a **draw-time decoration**: the `View` gains a gutter width + a per-buffer-line marker array; `draw()` reserves the left N columns, paints the marker on the **first wrapped segment** (`viewLine.linesX == 0`) of marked buffer lines, and shifts content right by N; `refreshViewLinesIfNeeded` reduces the wrap width by N. The buffer/cells/metadata are untouched (the gutter is pure decoration), so `DiffLineContents`/`BufferLineForViewLine`/the resolvers keep operating on the unshifted buffer. **Marker recompute (lazygit side).** Markers derive from (a) the buffer's resolved diff-line identities (stable per buffer line once loaded) and (b) `PatchBuilder`'s included set (changes on toggle). Recompute on toggle (sync) and on content render (navigating commits/files re-renders the main view). Streaming (markers for not-yet-loaded lines of a large diff) is a known follow-up — likely recompute on render-complete; the toggle-recompute covers the core demo for the spike. **Decomposition (linear):** 6a — the gocui reserved-column gutter (de-risk first; gocui unit test). 6b — single-line + hunk toggle, single file, wired to `PatchBuilder` + the sync selection advance. 6c — range + multi-file (reuses the step-4 group-by-file machinery). Whole-commit (multi-file) diff and `enter`-focuses-the-main-view bleed into step 7. ### 21.20 Session 17 (cont.): step 6 built — gutter + patch toggle (6a/6b done) Committed (most recent last; fixups noted): ``` 67906ae47 Add an on-demand inclusion gutter to gocui views (6a; +fixup intrange) f8b37370d Add identity-based line accessors to PatchBuilder (prep) 185ddeea9 Extract stageRange from stageSelectedLine in the main view (prep) 1aed9428a Build a custom patch from the focused main view of a commit's files (6b; +fixups: e2e test, reset stale gutter on preview re-render) ``` **6a — the gocui gutter (de-risk spike, clean, no fight).** `View.SetInclusionGutter(show, marks []bool)` reserves a left column, paints `InclusionGutterMarker` ("✓", green) on the **first wrapped segment** of marked buffer lines, shifts content right, and narrows the wrap width while shown. Pure draw-time decoration — the content buffer, metadata, click resolution and wrap inputs are untouched; both main views are `Wrap=true` so `ox` is pinned to 0 (no h-scroll complication). gocui unit tests: `TestInclusionGutter`, `TestInclusionGutterMarkerOnFirstSegmentOnly`. The de-risk verdict: the reserved-column-over-pager rendering is straightforward — the spike did not fight us. **6b — patch toggle from the commit-files main view.** `space` routes to staging (files panel) or patch toggle (commit-files panel) by **which handler the panel registers** — a new `onTogglePatchFocusedMainView` channel, kept separate from `onStageFocusedMainView` because the post-action differs (sync gutter repaint vs async reveal); its presence also gates the gutter. `CommitFilesController.GetOnTogglePatchFocusedMainView` resolves the selection to change-line identities (the shared `ChangeLinesInViewRange`), maps them to patch-builder indices (`PatchBuilder.PatchLineIndicesForLines`), decides add/remove from the first selected line (like the explorer's `toggleSelection`), toggles, then repaints the gutter — no refresh, so the pager is never re-run. It starts the patch builder if inactive (with the discard confirmation when a patch for a different commit is active). The included-set → gutter mapping is `StagingHelper.RefreshInclusionGutter`: resolve each rendered change row's identity and mark it when `PatchBuilder.IncludedLineIdentities(file)` contains it. Recomputed on focus (`focusMainView`) and on toggle; reset on preview re-render (commit-files `GetOnRenderToMain`). End-to-end test `patch_building/build_from_main_view` (toggle one hunk → apply → only that hunk lands). unit + lint green; `e2e-all` green modulo the known empty-pathspec flake (`diff/diff_non_sticky_range` etc.). **The §21.5 / §21.19 insight held:** patch-building is **synchronous** — a toggle changes only the inclusion set, the commit's diff is unchanged, so the gutter repaints in place and the pager is never re-run. This is the whole reason the draw-time gutter exists, now realized. **Needs interactive sign-off** (the gutter is draw-time, so not e2e-assertable, and the harness has no real delta): the gutter look/feel under delta + no-pager + difftastic; the checkmark glyph/color (trivial to change); and the on-demand appear/disappear as the patch is created/emptied. **Known limitations (carry forward):** - **Scoped to commit-files.** Commits / sub-commits / stash main views (the whole-commit multi-file diff) register no toggle handler yet → `space` is a no-op there, no gutter. That's 6c / step 7. - **No auto-advance after a toggle** — the selection stays on the toggled hunk (so `space` again toggles it off; navigate by hand). The explorer auto-advances (`SelectNextStageableLineOfSameIncludedState`); deliberate first-cut simplification (and it sidesteps the removed `AdjacentChangeLine`). - **The browser ◐/● indicators and the secondary patch summary don't update live on a toggle** — the toggle deliberately does *not* refresh `COMMIT_FILES`/`PATCH_BUILDING`, because that refresh re-renders (re-runs the pager on) the main view via the `NextInStack` branch and would reset the gutter + scroll. They catch up the next time the browser/secondary naturally renders. A real gap; productionization (step 8) wants a way to update a list model without re-rendering the main view. - **Streaming**: marks for not-yet-loaded lines of a large diff appear once loaded + recomputed (next focus/toggle). - `togglePatchLines` already groups by file (multi-file-ready), but only commit-files registers the handler and the add/remove direction is decided once from the first selected line. **NEXT (6c / step 7):** register the toggle handler on commits / sub-commits / stash main views (whole-commit multi-file diff); then step 7 (`enter` focuses the main view for files AND commit-files) and step 8 (tear out the explorer views + escape machinery). Consider auto-advance and live browser/secondary updates as polish. ### 21.21 Session 17 (cont.): toggle refreshes normally — secondary + indicators update live The §21.20 "browser indicators / secondary patch summary don't update live on a toggle" was the wrong tradeoff (user: it makes patch-building unusable, and updating just the list model wouldn't fix the secondary anyway). **The toggle now refreshes normally** (`Refresh({COMMIT_FILES})`), which re-renders the commit-files browser (the file's ◐/● status), the secondary view (the cumulative patch — and the layout splits to show it when the patch first becomes non-empty), and the main diff. **Scroll/selection are preserved for free** — the realization the user pushed on: a patch toggle re-renders the **same diff command**, and the render pipeline already keeps the scroll when the command is unchanged (`pty.go`: `ResetOrigin = restore == nil && cmdStr != GetTaskKey()`). So no `PreserveDiffPositionOnRerender` is needed (unlike the `-U` context-size change, which *changes* the command and so must preserve explicitly). The selection (cursor + range anchor) survives the re-render too — it's view state the task doesn't touch. **The gutter rides the same re-render** without the restore machinery, by recomputing in `GetOnRenderToMain` keyed on the **same content-equality test the pipeline uses**: if the diff command equals the manager's current task key (a toggle re-rendering the same diff), recompute the gutter over the current content — identical to the incoming content, so the marks are valid and survive the swap; otherwise (a different file is loading) clear the gutter, recomputed when the main view is focused. This replaces the §21.20 unconditional reset-on-preview-render. (Coupling note: the equality test duplicates `newPtyTask`'s `strings.Join(cmd.Args, " ")` key derivation — flagged for productionization.) Test `build_from_main_view` strengthened: after the toggle it asserts the selection is unchanged **and** the secondary view shows the cumulative patch (the toggled block only). unit + lint + the patch_building/staging suites green. **This removes the big §21.20 limitation.** Remaining (carry forward): scoped to commit-files; no auto-advance after a toggle; streaming. Committed as fixups on `1aed9428a` (note `0ce3cc378`'s unconditional reset is superseded by the conditional version — fold accordingly). ### 21.22 Session 17 (cont.): first interactive feedback on the gutter — 4 of 5 fixed User tested step 6 interactively ("works mostly well"). Five issues; fixed 1, 2, 3, 5, recorded 4 for later (user's call: 6c matters more). - **(1) gutter/secondary visibility disagreed.** Gutter was gated `Active && !IsEmpty`, secondary on `Active` — so unstaging the last hunk left the secondary (empty patch) but hid the gutter. Now the gutter follows the secondary's criterion (dropped `IsEmpty`). - **(3) gutter shown inconsistently while unfocused.** Decided (user): the gutter is a **focused-main- view affordance** — show it only while the main view holds focus. So the model is now: *gutter visible iff a patch is active AND the Normal main view is the current context.* `RefreshInclusionGutter` became parameterless and self-contained (targets `Contexts().Normal`, checks `CurrentStatic()`, then `NextInStack` for the panel — **focus checked first, since `NextInStack` panics if the context isn't in the stack**, which it is exactly when current). Recompute moved to `MainViewController.GetOnFocus` (+ a new `GetOnFocusLost` that hides it), dropped from `focusMainView`. This also **removed the fragile `strings.Join(cmd.Args)` content-equality hack** from §21.21: while focused, the only re-render is the same-diff toggle, so recomputing over the current content is always valid; unfocused → hidden. - **(2) selection drifted when the split appeared** (user: "looks pretty broken"). Root cause: the focused-main-view selection is **view-line-based**, so when the secondary view appears the main halves in width, the diff re-wraps, and the cursor lands on the wrong content (the gutter marks are fine — they're keyed by *buffer* line, width-independent). Fix: after the toggle's re-render, re-select the same content by **change-line ordinal** (reuse `RevealSelectionAfterStaging`; the line isn't consumed so the ordinal is unchanged, and ordinals are width-independent), re-expanding the hunk. The handler installs it after the `Refresh` (so it works for both the sync path and the async discard-confirm path, and never lingers — a `Refresh` always follows). A range collapses to a line, as a staged range does. - **(5) checkmark only on the first wrapped segment.** Now drawn on every wrapped segment (dropped the `linesX == 0` guard); gocui test renamed `TestInclusionGutterMarkerOnEverySegment`. - **(4) DEFERRED — pager switch shifts the checkmarks.** Switching pagers keeps the **same git command** (the pager is an env var, not an arg) but yields a **different buffer-line structure**, so marks computed from the pre-switch buffer no longer align. The proper fix recomputes the gutter from the **new** buffer at render completion — needs a post-render hook we don't have, and pager-switching mid-build is uncommon. Left unfixed (a refresh fixes it); revisit if it annoys. All fixes are fixups on `1aed9428a` / `67906ae47`; `e2e-all` green (modulo the empty-pathspec flake). **NEXT: 6c** — register the toggle handler on commits / sub-commits / stash main views (whole-commit multi-file diff). Then step 7, step 8. ### 21.23 Session 18 (2026-06-19): step 6c done — patch building from the whole-commit main view `space` now builds a custom patch straight from the **whole-commit (multi-file) diff** the commits / sub-commits / stash main views show, without first diving into the commit files panel. Committed (most recent last; the multi-file test is a fixup on the behavior commit): ``` 66224c84f Extract the patch-toggle back end out of CommitFilesController (prep) f9669f6f1 Build a custom patch from the commits / sub-commits / stash main views (6c; +fixup: multi-file e2e) ``` **Prep — the toggle back end is now panel-agnostic.** The 6b handler lived entirely on `CommitFilesController`. Pulled the panel-agnostic parts (`togglePatchFromFocusedMainView` skeleton, `togglePatchLines`, `revealSelectionAfterPatchToggle`, `patchFilename`) into shared free functions in `patch_building_from_main_view.go`. The skeleton now takes the **patch target** (`from/to/reverse/canRebase`) and a **refresh callback** as params instead of reading the commit files context + hardcoding `Refresh({COMMIT_FILES})`. The commit files handler passes exactly what it did before — behaviour-preserving (`build_from_main_view` still green). It also stopped going through `CommitFilesHelper.StartPatchBuilder()` and now calls `PatchBuilder.Start(from,to,reverse,canRebase)` directly with the passed values (the patch builder is self-contained after `Start`, §patch_builder). **6c — the handler lives on `SwitchToDiffFilesController`** (already bound to exactly LocalCommits/SubCommits/Stash, and already deriving the ref/range/canRebase for these panels in `enter()`). Two decisions, made with the user: - **Patch target: derived directly from the panel's selected ref**, *not* by re-pointing the commit files context (user: "go with whatever is easier" + a half-baked feeling the patch-from-commits UX may change). Keeps the commits toggle decoupled from `CommitFilesContext` — less to unwind if the UX shifts. To avoid duplicating the from/to arithmetic, extracted `context.FromAndToForDiff(ref, refRange)` (shared with `CommitFilesContext.GetFromAndToForDiff`) and a private `canRebase(ref, refRange)` shared with `enter()`. The target matches the diff the main view shows (`git show ` for a single commit ≈ `git diff ^ -- ` for non-merge commits — the same assumption the explorer relies on; identities are pager/header-independent). - **Refresh: the cheap one** (user: refreshing commits per hunk-stage is too expensive, and unneeded — no per-file indicators to rerender here, unlike commit-files). The callback is `OnUIThread(PostRefreshUpdate(panelContext))`, re-rendering just that panel's **own** main + secondary views (same diff command → scroll preserved; gutter rides via the panel's `GetOnRenderToMain`), with **no commit-list reload**. Order stays toggle → refresh → reveal: both refresh callbacks *queue* the render (Refresh via its OnUIThread; ours explicitly), so the reveal-by-ordinal restore is installed before the queued render consumes it — works for the sync path and the rare discard-confirm popup path. **Sub-commits and stash didn't render the secondary patch view at all** (only LocalCommits did); gave them the same `secondaryPatchPanelUpdateOpts` + a `RefreshInclusionGutter()` in their `GetOnRenderToMain` (also added the gutter call to LocalCommits'), so the cumulative patch + gutter track the toggle. The gutter (`RefreshInclusionGutter`) was already generic — it lights up for any panel beneath `Normal` registering `GetOnTogglePatchFocusedMainView`, so it now works for all three for free. Routing is safe: only Files registers a *stage* handler, so these panels hit the toggle path in `stageSelectedLine`. **Tests:** `build_from_whole_commit_main_view` (toggle one file's hunk from a two-file commit diff in the sub-commits main view → only that file lands, the other stays out) and `build_multi_file_from_whole_commit_main_view` (hunk-mode `↓` moves across the file boundary to file2's block; toggle both → patch spans both files → apply lands both). The multi-file-range/accumulation path (`togglePatchLines`' group-by-file) was untested by e2e in 6b too; now covered. unit + lint + the patch_building/staging/commit/stash/rebase/ cherry-pick/diff suites green. (Files line-count after apply uses `ContainsLines`, not exact `Lines` — a transient `.patch` file in the repo dir can add a row.) **Signed off (user): "works very well."** **Crash fixed (same session, fixup on `f9669f6f1`).** 6c broke a latent invariant: before it, an **active patch implied the commit files context was set up** (the only way to start a patch was to enter the commit files panel, which `ReInit`s its ref). 6c starts the patch builder directly from the commits panel *without* touching `CommitFilesContext` (the deliberate decoupling), so its ref stays **nil**. Then any `Refresh({COMMIT_FILES})` while such a patch is active — e.g. ctrl+p → **Reset patch** (`PatchBuildingHelper.Reset`) — hit `refreshCommitFilesContext` → `GetFromAndToForDiff` → `FromAndToForDiff(nil, nil)` → `ref.ParentRefName()` on a nil ref → SIGSEGV. Fix: guard `refreshCommitFilesContext` to no-op when the context has neither a ref nor a refRange (nothing to load). Correct independent of 6c, and covers the whole class (the rebase-y menu actions operate on the commits model + patch builder, not `CommitFilesContext`, and their post-op refreshes route through the same guard). `FromAndToForDiff` keeps assuming a valid ref — a crash there is more debuggable than a silent empty range, and every other caller has a ref by construction. Regression test `reset_patch_built_from_main_view` (build from sub-commits main view → never enter commit files → ctrl+p Reset → no crash, patch gone); it reproduced the exact panic before the guard. **Needs interactive sign-off** (draw-time gutter, no real delta in the harness): the gutter / secondary / on-demand appear-disappear on the **whole-commit multi-file** diff under delta + no-pager + difftastic; and the **LocalCommits** path specifically (canRebase=true → the full apply-options menu, not just "Apply patch"; the e2e covers SubCommits, canRebase=false). Carry-forward limitations unchanged from §21.22: no auto-advance after a toggle; streaming; the §21.22(4) pager-switch checkmark shift. ### 21.24 Session 18 (cont.): revised forward plan — drop steps 7/8, add explorer commands + dispatch refactor + pager fallback **Steps 7 and 8 are dropped** (user). Rationale: (1) little to learn — `enter`-focuses-the-main-view and tearing out the explorer/escape/snapshot machinery are integration mechanics, not prototype unknowns; (2) keeping the old staging / patch-builder explorer views is actively useful as a **behavioral reference** while testing the merged view — when something feels off, an A/B against the old panels tells us fast whether it's a regression or always-been-thus. So `enter` keeps its current meaning, the explorer views stay, and the §12.2 escape/snapshot machinery stays untouched (no teardown). Cost: we don't prove the "main view fully replaces the explorers" endgame — but that's a production integration detail, not a prototype unknown. Instead the prototype gains the staging/patch-building commands the merged view still lacks, plus two productionization de-risks. New sequence (linear): **(A) Dispatch refactor — collapse the per-command delegation channels into one.** PREREQ for B/C; do first. Today each focused-main-view command the side panel handles needs its own channel: a `types.Context` interface method + a `BaseContext` field + an `attach.go` registration + a `baseController` default (`onClickFocusedMainViewFn`, `onStageFocusedMainViewFn`, `onTogglePatchFocusedMainViewFn` so far) — ~4 touch points per command, doesn't scale to `d`/`ctrl+o`/… (the §21.9 debt). Replace with ONE channel: a side-panel context exposes `GetFocusedMainViewActions()` returning a single interface (nil for non-actionable panels) with a method per command (`OnClick`, `PrimaryAction` = stage|toggle, `DiscardSelection`, `CopySelection`, …). `MainViewController` becomes a thin dispatcher (owns the keybindings + GUI mechanics — select mode, reveal — fetches the handler from the panel beneath, calls the method). Adding a command = one interface method + implement in the 2-3 controllers + one keybinding; no plumbing. - **Keep the underlying BaseContext function-attachment mechanism** (`AddOnFocusFn` & friends). The user half-wanted to replace that whole mechanism with something better, but explicitly **scratched it**: the prototype is already huge, no concrete better mechanism in mind, out of scope. We collapse to one channel *using* the existing mechanism, not replace the mechanism. - **Sub-decisions for implementation:** (i) unify signatures to `error` — push step-5's `focusViewName` focus-follow into the handler (calling the shared reveal/focus helpers) so the dispatcher stays dumb; it's a real change to that path, not free. (ii) Partial support is mostly polymorphism, not optionality (`d`/`ctrl+o` work on every diff panel, just different backends; `PrimaryAction` = stage for files, toggle for commits). The one real partial case is reflog — see below. **(B) `d` — discard a hunk.** Different backend per panel: working-tree discard (files) vs the patch-building variant (commits/commitFiles). Pin the exact semantics in each at implementation time; the (A) handler design accommodates it by construction (each panel implements `DiscardSelection`). **(C) `ctrl+o` — copy parts of a diff to the clipboard.** Supported by every diff panel. **(D) No-OSC-pager fallback (LAST — the biggest production unknown).** The focused main view *is* the staging view, so it must be stageable; a pager that emits no metadata forces a fallback. Decided shape: - **Fall back to the raw (no-pager) rendering at focus time** for an unsupported pager — keep the pretty pager output for *browsing* (the unfocused preview), switch to raw only when you focus to act. (Not always-raw: don't degrade browsing for everyone to spare unsupported-pager users one re-render.) - **Detection = treat metadata as a pager capability, not a per-render observation.** Lean (user deferred the pick to me): a one-time **probe** — run the pager on a small synthetic diff, check for OSC 1717, cache the verdict, re-probe on config change — so each focus renders raw-or-pager *directly*, never double-rendering. (Capability is binary+config-dependent, not content-dependent, so one probe is valid. A lazy "probe on first focus of an unknown pager, cache" variant is an acceptable simpler alternative. We *could* also detect at render time without a probe — lazygit holds the raw diff, so "raw has change lines but rendered output emitted no metadata ⇒ unsupported" is decidable — but that double-renders on first focus, hence the probe.) - **Click-to-focus on an unsupported pager: best-effort by view line number** (user's call). We can't resolve *which* line was clicked (that resolution IS the metadata we don't have), so on the fallback re-render land the selection on the **same view-line index** that was clicked — if the pager restructured the diff only slightly, the same Y is the best chance of landing near where you clicked — rather than jumping to the first hunk. Keyboard-focus is unaffected beyond the re-render. Building this is the point: it answers both technical feasibility and how the focus re-render *feels*. **Reflog patch-building (note, not now).** Not supporting custom-patch-building from the reflog panel's diff was an **oversight, not a deliberate limitation** (user). The reflog already shows a specific commit's diff; building a patch from that commit should work and shouldn't be hard (reflog uses `SwitchToSubCommitsController` today, so it'd want the 6c-style toggle handler wired up for it too). The technical challenges aren't interesting, so it's deferred — but it's a real gap to close in production, not a "can't." (Once the (A) dispatch refactor lands, this likely becomes "reflog returns the same `FocusedMainViewActions` the commit panels do.") **NEXT: (A) the dispatch refactor** (new session), then (B) `d`, (C) `ctrl+o`, (D) the pager fallback. ### 21.25 Session 19 (2026-06-19): (A) the dispatch refactor — DONE The per-command delegation channels are collapsed into one. Committed (most recent last; both behaviour-preserving): ``` b694f4573 Push the staging focus-follow into the side-panel handler (prep) 55ba6e0d7 Collapse the focused-main-view handler channels into one (A) ``` **Prep — unify the handler signatures to `error` (sub-decision (i)).** The two `space` handlers were asymmetric: the patch-toggle handler did its own re-render + reveal and returned `error`, while the staging handler returned a `focusViewName` so the dispatcher (`MainViewController.stageRange`) could do the reveal-and-focus dance on its behalf — different return types, which blocks merging them. Pushed the focus-follow into `FilesController` (now `PrimaryAction`): it does the post-staging reveal and pane focus itself. Extracted the reveal/select-mode logic the two handlers shared (collapse a range to a line, preserve the change-line ordinal across the re-render, re-expand a hunk) into `revealSelectionAfterPrimaryAction(c, sourceViewName, targetViewName, firstLineIdx)`, with `mainContextForViewName` resolving a view name to its `*MainContext`. This *replaced* the old `revealSelectionAfterPatchToggle` (toggle now calls the shared helper with source==target) and deleted `stageRange`. Dispatcher is now uniform: read the selected range, hand it to the handler. **(A) — one channel.** Replaced the three channels (`onClick/onStage/onTogglePatch FocusedMainViewFn`, each = HasKeybindings getter + IBaseContext `Add` + BaseContext field/getter + baseController nil default + attach.go registration ≈ 5 touch points/command) with a single `FocusedMainViewActions` interface (`OnClick`, `PrimaryAction`) exposed via `GetFocusedMainViewActions()` (nil for non-actionable panels). The 2-3 controllers implement the interface directly and `return self`; `MainViewController` fetches the actions from the panel beneath and calls the method. **Adding a command is now: one interface method + implement in the 2-3 controllers + one keybinding — no plumbing.** Kept the underlying BaseContext function-attachment mechanism (per §21.24, the user scratched replacing it). **The patch-building classification (gutter signal).** `RefreshInclusionGutter` used `GetOnTogglePatchFocusedMainView() != nil` as a proxy for "the panel beneath builds a custom patch" (so the inclusion gutter shows beneath commits/stash/commitFiles but not the staging files panel, nor reflog which has no toggle today). Collapsing the channels erased that proxy. First restored as a separate marker interface, then (user's call) folded into the existing `DiffMainViewContext`: its bare `IsDiffMainViewContext()` marker became `GetDiffMainViewType() DiffMainViewType` returning `None | Staging | PatchBuilding` — one classifier instead of two marker interfaces. The gutter shows iff the panel's type is `PatchBuilding` (commitFiles / localCommits / subCommits / stash); files = `Staging`, reflog = `None` (diff shown, selection editable, but no `space` action — the deferred patch-building gap). Only `PatchBuilding` is read today; the other values document the taxonomy and keep reflog honest (it'll flip to `PatchBuilding` once wired). **Tests:** `just build` + `unit-test` + `lint` + **`e2e-all` all green** (one transient `build_from_main_view` failure under parallel load on the first batch run — the known empty-pathspec flake; passed in isolation and on every rerun). The staging/patch_building from-main-view suite (`stage_{hunk,range,range_spanning_files}_from_main_view`, `select_*_from_main_view`, `build_{,multi_file_}from_whole_commit_main_view`, `build_from_main_view`, `reset_patch_built_from_main_view`) covers the dispatch + reveal paths and stays green. **Carry-forward unchanged:** the gutter is draw-time so no e2e covers its appearance (interactive sign-off still pending per §21.23); reflog patch-building still a deferred gap (and now trivially: reflog would return the same `FocusedMainViewActions` + implement the marker). **NEXT: (B) `d` (discard a hunk)** — different backend per panel (working-tree discard vs patch-building variant); the (A) handler accommodates it (add `DiscardSelection` to `FocusedMainViewActions`). Then (C) `ctrl+o` copy, (D) the pager fallback. ### 21.26 Session 19 (cont.): (B) `d` — discard a hunk — DONE `d` in the focused main view now discards the selection, mirroring each explorer. Committed (most recent last): ``` 3719a0412 amend! Generalize FilesController.stageDiffLines to applyDiffLines (prep — folds into 2414f3eab) 19d4b8f66 Discard the selected diff line(s) from the focused main view (B + 2 e2e tests) ``` **Prep — `applyDiffLines` generalized.** `stageDiffLines` used one `reverse` flag for *both* "which diff to read" (it's the `cached` arg of `WorktreeFileDiff`) and "reverse the apply"; that only works because those coincide for stage/unstage. Working-tree discard breaks it: read the **unstaged** diff (the side shown), but apply a **reverse, not-cached** patch. So split them — `applyDiffLines(file, infos, sourceCached, ApplyPatchOpts)`. Found via the failing staging-discard e2e (no lines matched, because it was reading the empty staged diff). The prep commit as first written had the wrong signature; corrected in place with an `amend!` so the prep introduces the final shape (per [[clean-history-no-back-and-forth]]). **(B) — `DiscardSelection` + disabled reason on `FocusedMainViewActions`** (user picked full explorer-parity disabled-reason UX over silent-no-op/handler-error). The dispatcher binds `Universal.Remove` and forwards to the panel beneath; per panel: - **files** → working-tree discard, mirroring the staging view's `d`: reverse-apply **not cached** on the unstaged side (destructive → confirm unless `SkipDiscardChangeWarning`), reverse-apply **cached** on the staged side (= unstage). Always available (zero-context = inline error, like the staging view), so its `DiscardSelectionDisabledReason` is nil. - **commit panels** (commitFiles + the whole-commit diff of localCommits/subCommits/stash) → remove the selected lines from the commit via rebase, mirroring the patch builder's "discard lines from commit": reset any active patch, build a one-off patch from the selection (reusing `togglePatchLines`), then `DeletePatchesFromCommit`. Shared free functions `discardSelectionFromCommit` + `discardFromCommitDisabledReason` in `patch_building_from_main_view.go`, paralleling the toggle. Only rebaseable on a **local branch**, so the disabled reason greys `d` on stash + other-branch sub-commits (never rebaseable) and mid-rebase — treated all the same (user OK'd; the "never applicable ⇒ hide entirely" hair isn't worth it). **Tests:** `staging/discard_from_main_view` (discard one hunk of a two-hunk working-tree file from the files main view; the other hunk stays) and `patch_building/discard_lines_from_commit_main_view` (discard one line from a local commit straight from the commits main view → rebase → commit keeps the other lines). `build` + `unit` + `lint` + **`e2e-all` all green**. **Needs interactive sign-off / carry-forward:** the commit-discard's post-rebase re-render isn't given a special reveal (the SYNC refresh re-renders; selection lands wherever it falls) — fine for a destructive op, revisit if it feels off. Files-discard reveals same-pane by ordinal; the rare staged-side-collapse case (discard-on-staged = unstage, secondary pane empties) isn't special-cased. Reflog `d` no-ops (nil actions), like its `space`. **NEXT: (C) `ctrl+o` (copy parts of a diff to the clipboard)** — supported by every diff panel; add `CopySelection` to `FocusedMainViewActions`. Then (D) the pager fallback. ### 21.27 Session 19 (cont.): discard bug fixes (user review) + selection visibility User reviewed (B) and found three discard bugs + one pre-existing selection-visibility bug. All fixed; the §21.26 "carry-forward" items above are now resolved. Bugs 1-3 are fixups on `19d4b8f66`; bug 4 is its own commit (`f06c64366`). **Bug 1+2 — files discard must reuse the primary action's focus-follow.** Discard on the staged side *is* unstaging (reverse + cached → index), so it must behave identically to `space` there: the selection advances to the next staged hunk, focus follows the staged side (secondary when split), etc. My naive same-pane reveal got this wrong (lost focus / selection on last-staged-hunk; moved focus to unstaged when discarding the first hunk of an only-staged file). Fix: extracted `applyDiffLineSelection` (apply + refresh + focus-follow + reveal) and route both `PrimaryAction` and `DiscardSelection` through it; `diffLineSelection` resolves the selection + which side. The only real difference is the `ApplyPatchOpts` (stage = forward/index, unstage = reverse/index, discard-unstaged = reverse/not-cached) and the confirm (unstaged discard only). Test `discard_from_staged_main_view`. **Bug 3 — commit-discard must reveal the next hunk** (I'd hand-waved "fine for a destructive op"; user disagreed, correctly). Install `revealSelectionAfterPrimaryAction` before the rebase's `CheckMergeOrRebaseWithRefreshOptions(SYNC)` so the ordinal-reveal rides that re-render, exactly like staging. Verified it rides the rebase refresh (test now asserts the selection lands on the next surviving line). **Bug 4 (pre-existing) — hide the selection when the focused main view has no diff.** It always showed a selection while focused, even over "No changed files" / a merge message; and a stale selection lingered after the last change was discarded or changes vanished outside lazygit. Fix has two moments (focus *reuses* the rendered content rather than re-rendering, so one hook can't cover both): - **Focus:** `showInitialDiffSelection` leaves the selection off when `ViewHasChangeLines` is false. - **Render:** the panel's render-to-main is where diff-vs-placeholder is decided (user's pointer), so `updateFocusedMainViewSelectionVisibility` sets the selection there — shown only on the focused pane and only when a diff is rendered. Covers the refresh cases focus can't: discard-to-empty + external changes both ways. Wired into `FilesController.GetOnRenderToMain` (placeholders → off, diff → on); commit panels always render a diff. New `SelectionIsShown/Hidden` e2e assertion (reads the view's `Highlight`, since `SelectedLines` ignores it); tests `no_selection_when_no_changes` + `hide_selection_after_discarding_last_change`. `build` + `unit` + `lint` + **`e2e-all` all green.** ### 21.28 Session 19 (cont.): (C) `ctrl+o` — copy parts of a diff — DONE `ctrl+o` in the focused main view copies the selected diff line(s) to the clipboard. Committed `16035437d`. **Design decision (user-confirmed, deviates from §21.24): copy is a direct `MainViewController` command, NOT a `FocusedMainViewActions` method.** Unlike stage/discard, copy is panel-*independent* — it just reads the text the focused main view shows + the pager config, no per-panel backend. Routing it through the interface would (a) give three identical implementations (no real polymorphism) and (b) exclude the **reflog**, which is a diff panel with nil actions. As a `MainViewController` binding gated on `Highlight` it works over every diff panel including reflog, with no duplication. (So §21.24's "add `CopySelection` to the interface" was wrong for this command; the interface is for things with per-panel backends.) **`dropDiffPrefix` / pager (the §21.27-adjacent concern user raised).** The staging view strips the +/-/space column when copying, safe because it's always a raw diff. The focused main view can't assume that: under a pager the +/-/space column may or may not survive (delta drops/restructures it, ydiff keeps it and only colorizes) and we can't tell which, so stripping the first char might eat content. Fix: `usingExternalDiff()` (pager configured?) gates the strip — no pager → `dropDiffPrefix` (raw diff, strip homogeneous selections); pager → copy verbatim (cost: missing the strip for column-preserving pagers). Reused the existing `dropDiffPrefix` (same-package free function). **Deferred (user said optional):** refining the raw-diff strip to classify header lines by diff-line metadata `Type` instead of the text's first char — that would fix commit `159bbb0825`'s `--- a/file` → `-- a/file` edge case "for free", but it's complicated by line-wrapping (SelectedLines is view lines; metadata is per buffer line), so not "easy" enough for now. **Test** `copy_from_main_view` (homogeneous addition hunk → clipboard has the `+` stripped; uses the `OS.CopyToClipboardCmd`→file emulation). The pager-verbatim branch needs interactive sign-off (no real pager in the harness, cf. the gutter). `build` + `unit` + `lint` + **`e2e-all` green.** **Bug fix (user review, fixup on the feature commit).** The first cut used `gocui.View.SelectedLines()`, which is a **test-only** helper: it indexes `buf.lines` (unwrapped) by the selection's `cy+oy` (view-line, wrapped) space, so any wrapped line → wrong content, and a view line past the buffer length → out-of-range panic. Fixed by mapping the selected view-line range to buffer lines via `BufferLineForViewLine` and reading `DiffLineContents()[bufferIdx].Text` — copies each wrapped line whole and once. (Lesson: don't use `SelectedLines()`/`SelectedLine()` in production; they assume no wrapping.) Also append a trailing `\n` so the last copied line is terminated (the pager-verbatim path and `dropDiffPrefix`'s keep-prefix branch don't add one). **NEXT: (D) the no-OSC-pager raw fallback** — the last and biggest production unknown (see §21.24(D)): fall back to raw (no-pager) rendering at focus time for a pager that emits no metadata, with a one-time capability probe and best-effort click-to-focus by view-line index. ### 21.29 Session 20 (2026-06-20): (D) the no-OSC-pager raw fallback — DONE > **SUPERSEDED by §21.30:** the *detection* mechanism described below (observe the > already-rendered diff at focus, infer support from whether change lines resolve) was > replaced by a probe after the user found it broke for binary files. The rendering/bypass > machinery (`ignoreExternalDiff`, `NewMainViewDiffTask`, the panel wiring, the raw > re-render) is unchanged. Read §21.30 for the final detection mechanism; the commits fold > to the probe (the observe code never lands). The focused main view now falls back to the raw (no-pager) diff when focused under a pager whose output we can't resolve to patch-space, so it stays stageable. Committed (most recent last; the fixup folds into the first): ``` 904a2543e Fall back to the raw diff when focusing a main view under an unresolvable pager (files panel) 9e3bf7e07 Thread ignoreExternalDiff through the remaining diff-cmd builders (prep) 6a1cf98a1 Extend the raw-diff fallback to the commit/stash/patch-building panels 8c969eaf9 fixup! Fall back to the raw diff ... (threading fix) ``` **Detection: DECIDED AGAINST the §21.24 synthetic OSC probe — observe-at-focus instead** (discussed and agreed with the user). The §21.24 lean ("run the pager on a synthetic diff, grep for OSC 1717, cache") has a fatal flaw: the capability we need isn't "emits OSC", it's "we can resolve the rendered diff's change lines", which is metadata #2 **OR** buffer-parse #1. A pure-OSC probe would misclassify every structure-preserving non-OSC pager (`delta --color-only`, `git diff --color`, `diff-so-fancy --patch`) as unsupported and force needless raw re-renders, even though buffer-parse stages them fine. A correct probe would have to run the full resolver on faithfully-reproduced pager output (PTY for the GIT_PAGER route, ext-diff config, env), which is a lot of fragile machinery. So instead we **observe the diff lazygit already rendered for browsing**, at focus: zero new machinery, zero fidelity gap, and it can't misclassify. **The verdict is the load-bearing state (not just an optimization).** Per-pager `diffPagerSupport` (`unknown|yes|no`) on `StagingHelper`, keyed on a pager signature (index + extDiffCmd + useExtDiffGitConfig + pager template) so it resets when the pager cycles/reloads. It's required for **re-renders while focused** (after staging a hunk, the SYNC refresh re-renders the diff — it must render raw again, which `verdict==No` makes happen upfront). `DiffMainViewShouldRenderRaw() = focusedOnMainView() && verdict==No`; every diff panel's `GetOnRenderToMain` reads it (so browse=pretty, focus=raw, and the re-render stays raw). **Bypassing the pager needs BOTH routes** (this was the subtle part): a pager reaches the diff either as an external diff command (in the cmd via `--ext-diff -c diff.external=…`) **or** as a stdin pager (`GIT_PAGER`, applied by `newPtyTask`, *not* in the cmd). So `plain` on the cmd builders doesn't suffice. The fix: a new `ignoreExternalDiff` arg on the diff-cmd builders forces `--no-ext-diff` while keeping git's colour (unlike `plain`, which also drops colour — we want a *coloured* raw diff for display); and `types.NewMainViewDiffTask(renderRaw, …)` renders via a `RunCommandTask` (→ `newCmdTask`, no GIT_PAGER) instead of `RunPtyTask` when raw. Lives in `types` because the commit-diff panels build through `DiffHelper`, which can't reach `StagingHelper` (helpers don't cross-reference), so the panel computes `renderRaw` and threads it in. **Focus flow** (`establishFocusedDiffSelection`, replacing the old `showInitialDiffSelection`; both keyboard `0` and click go through it, and `togglePanel`): - The rendered diff resolves change lines → place the selection on it; note the pager supported (but only when we're *not* already showing the raw fallback — else tabbing to an already-raw secondary pane would wrongly flip the verdict to Yes). - Resolves nothing + no pager → genuinely nothing to act on, no selection (the old behaviour). - Resolves nothing + a pager → `FallBackToRawDiff`: set verdict No (so `GetOnRenderToMain` renders raw), install a restore, trigger `sidePanel.HandleRenderToMain()`. The restore fires at the raw render's EOF swap: if it now resolves, place the selection; if the raw diff *also* has no change lines (a **binary file** — the one genuinely-ambiguous case the user flagged), revert the verdict to Unknown (binary is no evidence against the pager) and show no selection. - **No placeholder problem** (the "No changed files" worry): those are string tasks, never the pager, so `GetOnRenderToMain` never even reaches the diff branch — the fallback only ever applies to the real `git diff` task. - **Click-to-focus by view-line index** (§21.24's best-effort): the click's view-line index is replayed on the raw re-render (clamped), since we can't resolve *which* line was clicked under the bad pager. **Threading fix (fixup `8c969eaf9`).** The restore's `Apply` runs on the task goroutine (`go utils.Safe` in tasks.go), so the verdict write + selection placement there would race the UI thread's `GetOnRenderToMain` read. Hop to `OnUIThread` for that work (per [[main-thread-over-mutexes-direction]]); `swapIn`/`ClearRestoreForNextTask` stay inline, matching the existing restores. **Tests** (the real win: a pager renders in the headless harness, so this is the first CI coverage of the pager path). `cat -n` is the ideal unsupported pager — it numbers every line (so buffer-parse fails) and emits no metadata, and it's a GIT_PAGER-route pager (so it exercises the `RunCommandTask` bypass, not the cmd-arg one). `staging/stage_from_main_view_with_unsupported_pager` (browse shows `cat -n` numbering → focus falls back → stage a hunk, split persists) and `patch_building/build_from_main_view_with_unsupported_pager` (same, toggling into a custom patch from the commits panel). `build` + `unit` + `lint` + **`e2e-all` all green** (one `diff/diff_commits` flake under parallel load on the first `e2e-all`; passed in isolation and on the rerun — the known parallel-load flake, not this change). **Carry-forward / known edges (interactive sign-off pending — no patched delta in CI, so the *feel* of the focus re-render and the metadata path are unverified):** - **Mid-stream focus mislatch** (accepted): focusing a *supported* pager's diff before it finishes streaming could resolve nothing yet → fall back → latch No → that pager renders raw-while-focused until the pager changes. Rare (you focus a diff you're looking at, which has loaded); degraded-not-broken. - **Binary-first** (the user's flagged case): focusing a binary file under an unknown pager does one speculative raw re-render then reverts the verdict to Unknown (re-decided on the next text focus). The cmd-arg bypass (`ignoreExternalDiff`, for delta-as-external-diff) isn't exercised by CI — only the GIT_PAGER bypass (`cat -n`) is. - **Diffing mode** (`DiffHelper.RenderDiff`, the `W` ref-compare) is **not** wired to the fallback (left `ignoreExternalDiff=false`); focusing a diffing-mode diff under an unsupported pager wouldn't be stageable. A gap, deferred (diffing-mode staging is its own question). - **Reflog** is wired (it's a `DiffMainViewContext`), but it's read-only — the fallback only helps its edit/copy/navigate, not staging (it has nil actions). **This completes the §21.24 (A)-(D) sequence.** Remaining known production gaps from the plan: reflog custom-patch-building (§21.24, an oversight not a limitation), and the steps 7/8 explorer-teardown that were deliberately dropped (§21.24). History on this branch is throwaway — see [[prototype-branch-throwaway]]. ### 21.30 Session 21 (2026-06-20): (D) detection reworked — observe → probe for a handshake User reviewed (D) and found the §21.29 observe approach **broken for binary files**. Repro: an unstaged binary + an unsupported pager (unpatched diff-so-fancy). Focus → raw (ok); next 10s auto-refresh → **back to pager** (wrong); the focused view kept flip-flopping pretty/raw. **Root cause:** the binary-revert. I inferred "pager supported?" from diff *content* (`ViewHasChangeLines`); a binary file has no change lines under *any* pager, so it carries no signal — yet my "raw also empty ⇒ don't latch ⇒ revert verdict to Unknown" un-cached the verdict, so the next refresh rendered pretty again. Content-based detection forces a lose-lose: revert → flip-flop; don't-revert → a binary-first focus mislatches a *supported* pager. Not auto-refresh ignoring us — it respected the verdict; the verdict got reset. **Fix (discussed + agreed): detect by PROBING the pager for a handshake, not by observing renders.** A metadata-aware pager emits a **version-only OSC 1717 record as its first output** (a handshake announcing "I speak the protocol"). The probe runs the pager on **empty input** and greps for it. This is a **pager-level, content-independent** fact (a binary can't mislead it) **known before we render** (so we never render pretty then discover mid-flight we needed raw — the bug a "No changed files" → external-change → auto-refresh sequence would hit with observe, since observe has nothing rendered to learn from yet). The user pushed for the probe over my observe-on-the-handshake idea, and I conceded — their reasons hold: (1) empty-input probe is fast → run it synchronously on first need, cached; (2) observe can't know before the first render (the dance above); (3) **no PTY needed** — git needs a tty to *decide to invoke* a pager, but the pager *emits* the handshake whenever `EMIT_OSC1717_METADATA` is set, so we run it directly; (4) external diff commands: invoke with git's 7-arg diff-driver convention on two empty temp files; (5) `useExternalDiffGitConfig` — driver is per-file via `.gitattributes`, a single diff can mix drivers, so no one pager to probe → treated as **unsupported (always raw when focused)**, a documented limitation (the whole-diff fallback can't express per-file mixing; raw is always stageable). **Mechanism (commits below):** - **gocui** (`f3e480ff6`, new): `escapeInterpreter.dropMetadataIfHandshake` drops any OSC 1717 payload with no fields at its terminator, so the handshake (seen on *every* render of a conforming pager) is swallowed — no phantom line, no bleed onto the diff header. Per-line payloads always have fields, so they're kept. Unit test `TestDiffLineMetadataHandshakeSwallowed`. - **probe** (`DiffCommands.ProbePagerEmitsDiffMetadata`): empty-input run of the pager (stdin pager via `NewShell`) or the external diff command (7-arg convention on two empty temp files), env `EMIT_OSC1717_METADATA=V1`, grep stdout for the `\x1b]1717` handshake. `useExternalDiffGitConfig` → false. - **verdict** (`StagingHelper`): `pagerMetadataSupport *bool` cached per pager signature, probed lazily on first need. `DiffMainViewShouldRenderRaw() = focusedOnMainView && pagerConfigured && !supported`. - **focus flow simplified**: the observe/`FallBackToRawDiff`/binary-revert/`NotePagerSupportsStaging` are gone. `establishFocusedDiffSelection`: if `DiffMainViewShouldRenderRaw` (probed, known up front) → `RenderFocusedMainViewRaw` (install a restore that places the selection after the raw re-render — still `OnUIThread`, since `Apply` runs on the task goroutine — then trigger the side panel); else place on the diff directly. `placeOrHideInitialDiffSelection` hides the selection when there are no change lines (binary/placeholder), so a binary under an unsupported pager is **stable** (raw, no selection, no flip-flop) — the verdict no longer depends on content. **Commits:** `f3e480ff6` (gocui swallow, new) + `75c98e4e5` (fixup → `904a2543e`, the probe rework) + `0b8fefeb3` (amend! → `904a2543e`, rewrites its body from observe to probe; subject unchanged so the two fixups still match). After the user folds, `904a2543e` is the probe-based fallback; observe never lands. **The handshake trade (user agreed):** the handshake signals metadata-support (#2) only, not buffer-parseability (#1). So a *structure-preserving but non-emitting* pager (unpatched `delta --color-only`) now falls back to raw **while focused** (loses its pretty rendering during focus; browse unchanged), where §21.29's observe kept it pretty via #1. Predictable opt-in rule ("speak the protocol to be first-class in the focused view"); diff-so-fancy restructures anyway, so it's unaffected. **Tests:** `cat -n` (unsupported, GIT_PAGER route → exercises the probe's "no handshake" verdict + the `RunCommandTask` bypass) keeps the two §21.29 tests; new `staging/stage_from_main_view_with_conforming_pager` — a fake pager `printf 'MARKER\n'; cat` (handshake + a marker line + passthrough) — proves the probe trusts it (no raw fallback: the MARKER survives focus) and the handshake is swallowed cleanly. `build` + `unit` + `lint` + **`e2e-all` green**. **Scope beyond this repo (not done here):** the OSC spec must define the handshake record, and the **three** emitters (delta, difftastic, and now diff-so-fancy — OSC support added to it in a separate session, to be recorded in that flow) must emit it. Those are other repos/sessions; CI here covers the unsupported path (`cat -n`) and the supported path (the fake conforming pager), so no patched pager is needed to test. **Still pending interactive sign-off** (no patched real pager in CI): the *feel* of the focus re-render, and a re-check of the user's binary repro now that the flip-flop root cause (the content-based verdict) is removed. Carry-forward edges from §21.29 that the probe **resolves**: the mid-stream mislatch (the verdict is no longer derived from a render, so an incomplete render can't mislatch) and the binary flip-flop. Carry-forward edges that **remain**: diffing-mode (`W`) not wired; reflog wired but read-only; `useExternalDiffGitConfig` always-raw. ### 21.31 Session 21 (cont.): the three pager emitters patched + the spec Closes the cross-repo loop §21.30 left open — there were no conforming pagers, so every real pager fell back to raw. The handshake is now defined in the spec and emitted by all three reference pagers: - **spec** (`diff-line-metadata-osc-spec.md`, this repo, commit `323b8224e`): new §4.4 defines the version-only handshake record (`ESC ] 1717 ; ST`, no further fields), emitted first; §6 notes it precedes the per-line records. A host distinguishes it from a per-line record by field count. - **delta** (`/Users/stk/Stk/Dev/Builds/delta`): emit the handshake at the top of `delta()` before consuming the diff; flushes via the normal-return writer drop. + a `handshake_for_version` unit test. - **difftastic** (`/Users/stk/Stk/Dev/Builds/difftastic`): emit once (a `std::sync::Once`) at the top of `print_diff_result`, **explicitly flushed** (difftastic exits via `process::exit`, which skips the implicit flush — without it the lone handshake of an empty-diff probe is lost). + a unit test. - **diff-so-fancy** (`/Users/stk/Stk/Dev/Builds/diff-so-fancy`): emit before the main stdin loop; `osc_records` test helper now skips the handshake so the per-line assertions are unchanged, + two new bats tests (handshake first; handshake on an empty diff). Each was verified manually to emit `\x1b]1717` on the *exact* empty-input invocation the lazygit probe uses (delta/diff-so-fancy on empty stdin; difftastic via the 7-arg git diff-driver convention on two empty temp files), and to stay byte-silent without `EMIT_OSC1717_METADATA`. So the lazygit probe (`ProbePagerEmitsDiffMetadata`, which greps that invocation's output for `\x1b]1717`) now classifies all three as **supported** — no raw fallback, stage on their pretty output via the per-line metadata (#2). The delta/difftastic binaries must be **rebuilt** for this to take effect (`cargo build`); diff-so-fancy is a script. The full real-pager render+stage in lazygit remains the interactive sign-off (CI still can't run a patched pager; it covers the unsupported path via `cat -n` and the supported path via the conforming-pager fake from §21.30). ### 21.32 Session 22 (2026-06-20): exploratory UX tweaks — hunk-on-click in the focused main view The (A)-(D) sequence is done and the feature is functionally complete; before circulating the spec to pager authors and writing the production plan, a round of small UX tweaks to make the focused main view feel right. First tweak (two parts), both gated on `gui.useHunkModeInStagingView` semantics and **main-view only** (the old staging/patch-building explorer views are left alone): 1. **Click-to-focus selects the clicked hunk.** Clicking the unfocused main view to focus it used to drop a single-line selection at the click; the common intent is "stage this block", so it needed a follow-up `a`. Now, when `useHunkModeInStagingView` is on, a click on a **change line** selects that line's whole change block (hunk mode), matching what keyboard focus already did. A click on **context** still selects just that line (so it stays editable with `e`). The single source is `placeOrHideInitialDiffSelection`'s `clickedViewLine >= 0` branch; new predicate `StagingHelper.IsChangeLine(view, viewLine)` (wraps `GetDiffLineInfoForView(...).IsChange()`) names the "is the clicked line stageable" test, shared by this branch and the keyboard one. 2. **Clicking another hunk keeps hunk mode.** A pre-existing wart (inherited from staging/patch-building): once in hunk mode, clicking another change line reset to a single line. Now a click on a change line while in hunk mode re-selects that whole block; a click on context — or any click when not in hunk mode — drops to a single line. The two click handlers (`onClickInAlreadyFocusedView`, `onClickInOtherViewOfMainViewPair`) shared an identical selection body, so they were unified into one `selectClickedDiffLine` helper and the change made once. The decision keys off the **current** select mode (preserve hunk), not the config (which only seeds the *initial* mode on focus) — the two compose. **Open question resolved (user decided):** clicking a context line in part 1 stays in **line mode** rather than snapping to the next hunk below (`selectDiffHunk`/`ChangeBlockBounds` *would* snap, so the `IsChangeLine` guard is what holds it to the clicked line) — a click should select where you point, and it keeps the "click a context line, press `e`" path working. **No tests** (prototype tweaks the user is feeling out; may change). User's verdict on part 1 after manual testing: "feels much better, I like it a lot." Follow-up bugs the testing surfaced, all fixed (no tests, prototype): 3. **First cross-pane click dropped hunk mode.** Clicking the *other* main pane (the staged side you weren't focused on) selected a single line the first time even in hunk mode, because that pane's `DiffSelectState` was still its default until it had been focused once — tabbing to it and back was the workaround the user found. Fix: `onClickInOtherViewOfMainViewPair` now copies the leaving pane's `DiffSelectState` to the clicked pane before `selectClickedDiffLine` runs, so the very first click there behaves like every later one. (The two panes keep independent select state; this seeds the target.) 4. **A selection's far end not preserved across a pager switch.** `PreserveDiffPositionOnRerender` restored the cursor by patch identity but left the selection's *other* end (the range anchor) pinned to its old view line; a restructuring pager (normal delta → delta **side-by-side** is the clear repro) then left the selection spanning the wrong patch lines. Fix (general, not hunk-specific — the user pushed for this): remember the far end by patch identity too (`selectionFarEndIdentity`, the range anchor opposite the cursor) and put it back via `SetRangeSelectStart` after the re-render, found by `findDiffLine` (a `findResolvedDiffLine` + `matchByPatchLine` lookup, which works for context ends as well as change ends). So **one** mechanism restores both ends and covers hunk *and* range/sticky selections — no `reselectHunkOnRerender` fixup, no callback param; `PreserveDiffPositionOnRerender(view)` stays single-arg. If the far end didn't survive the re-render it collapses to the single cursor line. Both callers (pager cycle `onPagerChanged`, `-U` context-size change) get it for free. **Scope unchanged:** only the primary (`Normal`) pane is preserved on a pager switch (both callers pass `Contexts().Normal.GetView()`), so a selection on the *focused secondary* pane still isn't preserved — a pre-existing, broader gap (its scroll isn't preserved either), left as-is. 5. **Click-and-drag range anchored wrong / dead on context lines.** Dragging after a click turns a hunk selection into a range, but it was anchored at the change block's far end (where selecting a hunk leaves the gocui range anchor), and on a context line — where the click leaves no range anchor — dragging just moved the single selected line. Root cause: a click can show a whole hunk, so the gocui range anchor holds the block's far end, not the clicked line, and the clicked line can't be read back. Fix: remember each mouse-down's view line on `MainContext.dragAnchorViewLine` (set in both click entry points — `placeOrHideInitialDiffSelection` for the focus click, `selectClickedDiffLine` for the already-focused/ cross-pane click), and a new `MouseLeft`+`ModMotion` binding (`onDragInFocusedView`) re-anchors the range there (Mode→Range, hunk off) while gocui's own `SetCursor` tracks the dragged end. Works for the focus click and the already-focused click, on change and context lines. Drag anchor is a plain view line (no re-wrap between mouse-down and its drag, so no patch-identity needed). The old (buggy) behaviour came for free from `selectDiffHunk` leaving a range anchor + gocui moving the cursor on drag; nothing handled the drag explicitly before. **Follow-on, a gocui driver bug the above exposed:** the *first* drag-movement event was reported as `MouseRelease`, not `MouseLeft`+`ModMotion` — the tcell driver's `MAYBE_DRAGGING → DRAGGING` transition (`tcell_driver.go`) set the state but left `mouseKey`/`mouseMod` at their defaults. gocui still moved the cursor for it, but `onDragInFocusedView` didn't fire until the *second* moved-to line, so the first line of a drag showed the stale hunk-end anchor (range from block end → cursor) before re-anchoring. Symptom the user reported: "drag down one line → range from block end to here; one more line → snaps to anchored-at-click, correct thereafter." Fix: mark that first movement as a drag like every later one. No `MouseRelease` consumers exist (only `MouseLeft`/`ModMotion`). **Why the old staging panel (patch explorer) never showed this**, despite the same driver bug and its own drag-select: its mouse-down anchors the range *at the click* (`HandleMouseDown` → `SelectNewLineForRange` → `FocusSelection` → `view.SetRangeSelectStart(click)`), so the native anchor is correct from the start; the skipped first-move event still drew a correct `[click, cursor]` range (it only delayed that panel's internal `State` sync by one move, identical end state). The bug bites only when the anchor must *change* at drag-start — the main view's case, where a click anchors at the hunk's far end. So the driver fix is effectively a no-op for the patch explorer; it's needed only for the main view. (An earlier draft of this note wrongly said it "tightens" the patch explorer's drag — it doesn't; the commit message never claimed that.) ### 21.33 Session 23 (2026-06-23): preserve the selection across commit rewrites (not just `d`) `d` re-establishes the focused-main-view selection on the next surviving change (§21.26/§21.27), and it feels great — but it was the *only* path that did. Other operations that rewrite the commit under the focused main view (move-patch-out-into-index from the custom patch menu, undo/redo right after a `d` or a patch move) don't run through the focused-main-view action handlers, so nothing preserved the selection: the stale gocui selection (cursor/origin/anchor) was left painted over the new content — often a large, now-meaningless range. **Decision (with the user): a centralised, command-agnostic net, not per-command wiring.** Rather than teach every mutating command (move-patch ×N, undo, redo, future ones) to capture+restore the selection, the focused main view preserves it *itself*, by change-line ordinal, as the diff re-renders — the command-agnostic twin of `revealSelectionAfterPrimaryAction`. New free function `preserveFocusedMainViewSelectionAcrossContentChange` (main_view_controller.go, beside the per-action reveal), called from the four commit-diff side panels' `GetOnRenderToMain` (localCommits / subCommits / commitFiles / stash) right before `RenderToMainViews`, so the restore it installs rides the upcoming re-render. (No single controllers-layer render chokepoint exists, and the gui-layer one — `refreshMainViews` — can't reach the controllers-package reveal; four one-line calls to one shared fn was the clean option. Files panel deliberately excluded: stable diff command, see the gate.) **The load-bearing gate (the design's crux, refined mid-discussion).** It stands down unless ALL hold, so it neither fights a more precise restore nor disturbs a selection needlessly: - the focused main view (`Contexts().Normal`) is the current context and shows a selection (`Highlight`); - no precise restore is already pending (`manager.GetRestoreForNextTask() == nil`) — escape / post-stage reveal / `-U` context-size place the selection more precisely than an ordinal can, so defer to them; - **the diff command is actually changing** (`diffTaskCommandKey(task) != manager.GetTaskKey()`). This is the one I missed in the original pitch: a plain background refresh re-renders the *same* commit's diff unchanged, and there a live range (mid-selection) must be left alone — only a command change (a rebase rewriting the commit's hash; `ShowCmdObj(commit.Hash())`) means the content, and the selection's position, moved. The gate also neatly scopes the net to exactly the commit-rewriting ops. Handles both `RunCommandTask` and `RunPtyTask` (pager), since both honour the restore (pty.go) and key on `strings.Join(cmd.Args, " ")`. **Anchor = the selection's first line** (`SelectedLineRange()`'s first), matching every existing `revealSelectionAfterPrimaryAction` caller — *not* the literal cursor end. (We'd discussed "cursor's ordinal"; this is the finer reconciliation. Identical for a single line; for a range it collapses to the top. It honours "the selection, not the patch" either way, is consistent, and made the bespoke `d` reveal exactly redundant.) **Why the popup case works:** `MenuContext.OnMenuPress` pops the menu (`Context().Pop()`) *before* running the item's `OnPress`, so by the time move-patch's refresh re-renders, `Current()` is the focused main view again. Undo is a Global keybinding, so it fires while the main view holds focus. **Removed the bespoke commit-discard reveal** (the §21.27 bug-3 install in `discardSelectionFromCommit`): its rebase rewrites the commit → the net now fires with the same anchor → the install was redundant. Behaviour- preserving (the existing `discard_lines_from_commit_main_view` e2e still passes, now driven by the net). **Files-discard keeps its reveal**: stable diff command (net never fires there) + it has staging's focus-follow to the secondary pane. Stage / unstage / patch-toggle keep theirs too (toggle doesn't change the command). **Tests** (both verified meaningful by neutering the net → both fail): `patch_building/ keep_selection_after_moving_patch_out_main_view` (build a 1-line patch, leave a multi-line range, move out → range collapses to the surviving `+two`) and `undo/undo_keeps_focused_main_view_selection` (discard a line, leave a range, undo → range collapses to the restored `+one`). Two commits (feature, then the removal). `build` + `unit` + `lint` + **full `e2e` all green.** ### 21.34 Session 24 (2026-06-24): the delta-vs-selection bg fight resolved — `narrowSelectionHighlight` The §21.9 / §21.9b rough edge — delta conveys add/delete/context purely by background colour, so a full-width selection highlight takes the background over and you can't tell what kind of line(s) are selected — is now addressed by a per-pager config option. Three tries got here: - **`HighlightInset = 3`** (be776c653): selection bg only in the *middle*, a 3-col gap at each edge for the pager to show through. Hard-coded, both sides. - **`selectionBgColorEdgeWidth`** (8367750f9): inverted — selection bg only on the two outer N columns, pager shows through the middle. Configurable int, per pager. Read as two fat bars bracketing the line; the user couldn't get used to it. - **`narrowSelectionHighlight`** (6e4f21bbe, this session): a bool. The selection is a narrow bar (2 cols, fixed) at the **left edge only**; the rest of the line keeps the pager's own background. gocui field renamed `SelectedLineBgColorEdgeWidth` → `SelectedLineBgColorWidth` (an int "paint the left N cols"; the gui layer maps the bool → 2 in `applyCurrentPagerSelectionStyle`, so the magic number has one home). The predicate in `setCharacter` dropped the right-edge clause. **Two alternatives considered and rejected (with the user):** - **Blend the pager bg toward the selection colour** (lerp per cell, preserving the add/remove hue difference). Rejected as not general: for a 24-bit colour (delta) we have the real RGB, but for a *palette* colour the terminal owns the palette — lazygit can't know the actual RGB (tcell's `Hex()` only maps through its own *assumed* palette), and forcing an explicit RGB cell would make the selected line's tint stop tracking the terminal's palette as the unselected lines still do. A pager *could* emit palette colours, so blend can't be the general answer. - **Dither / checkerboard** (selection bg on alternating cells ≈ a cheap 50% blend). The user tried it: looks terrible in practice (screen-door texture, shimmers on scroll). Out. Left-only over both-sides: every "this row is special over coloured content" convention (git/editor change bars, diff gutters, selection gutters) puts the marker on the left; both-sides reads as heavier framing, which was most of what looked off about the edge-width version. ### 21.35 Session 25 (2026-06-24): the patch-building secondary pane — `space` removes correctly + it renders through the pager Two problems with the **custom-patch secondary pane** (the `NormalSecondary` pane, which previews the patch being built). Both committed (`72543cb4d` then `073070db9`). **(1) `space` in the secondary used the wrong indices.** The pane became actionable in the merge (the old explorer's secondary was inert, so this was never thought through). `space` routed through the same toggle handler as the main pane (`togglePatchFromFocusedMainView`), resolving the selection against the secondary's diff and mapping it to patch-builder indices **by line number**. But the secondary shows the *aggregated* patch, which **renumbers included additions** whenever an earlier addition in the same hunk is excluded (`transformHunkHeader` recomputes each hunk's `+start`). So the shifted number resolved to the wrong line in the original diff — often *adding* an unrelated line instead of removing the selected one (deletions, keyed by the stable old-file number, and fully-included hunks happened to work — hence "often does something"). Fix: resolve a secondary selection by its **ordinal among the change lines shown**, not by line number — the custom-patch view renders exactly the included change lines in order, so the k-th shown change line of a file is that file's k-th included change line (`PatchBuilder.IncludedChangeLineIndices`, `StagingHelper.ChangeLineOrdinalsInViewRange`, routed via `primaryPatchActionFromFocusedMainView` → `removePatchLinesFromFocusedMainView`). `space` in the secondary now only ever *removes*, mirroring `space` in the staging view's staged pane. **`d` (discard-from-commit) is disabled in the secondary** (user's call — it'd act on lines shown only as the patch, and `space` already removes them; `discardFromCommitDisabledReason` gained a `mainViewName` arg and `DiscardSelectionDisabledReason(mainViewName)` was threaded through the `FocusedMainViewActions` interface). e2e: `remove_lines_from_main_view_secondary` (3 adds, include 2 with a shift, remove one from the secondary, assert the right one survived + `d` toast; it fails on the pre-fix toggle path). **(2) The secondary rendered raw (`FormatView`), not through the pager.** User pushed back on "infeasible for external diff" and was right. **The unified mechanism (built, user-approved over the simpler stdin-only alternative):** materialize the patch as two real file trees under a temp dir — `a/` = each file's `from`-side blob, `b/` = that blob with the patch applied (`git apply`) — and render with `git diff --no-index --no-prefix a b`, reusing the main view's pager wiring (`DiffCommands.CustomPatchDiffCmdObj` mirrors `DiffCmdObj`). `--no-index` honors **both** `GIT_PAGER` (stdin pagers) **and** `--ext-diff`/`diff.external` (difftastic) — verified empirically — so every pager renders it like any diff. Used **always**, even raw (no pager → git-coloured), replacing `FormatView`; the user wanted git's own (correct) context lines, and it also makes the **post-removal reveal work** (the secondary is now an async diff task, so the reveal's restore is consumed — before, on a string task, it silently no-op'd). Design decisions and gotchas (all resolved in the prototype): - **Lifetime:** `PatchBuilder` owns the temp dir — created in `Start`, removed in `Reset` (user's framing). No signature caching; instead a **generation counter** bumped on every mutation drives a lazy rebuild (`PatchCommands.EnsureCustomPatchDiffTrees`, called from `secondaryPatchPanelUpdateOpts`). This was a *necessary* refinement to the user's "rebuild at the single mutation point" plan: the **old explorer shares the same secondary** (`secondaryPatchPanelUpdateOpts`) and mutates the patch via its own paths (`AddFileWhole` etc.), so a counter covering every path is required — but it still only rebuilds on change, never on navigation. - **Clean paths:** the `a`/`b` dir names masquerade as git's conventional `a/`/`b/` prefixes, so `--no-prefix` yields output byte-identical in shape to a normal git diff with **real repo-relative paths** — meaning the existing buffer-parse resolver (which strips `a/`/`b/`) attributes change lines correctly with no special- casing. - **Added files (the fiddly bit):** seed `a/` **empty** (not absent) but leave `b/` **absent**; apply `PatchToApply(false, false)` (added files as `--- /dev/null` creations, NOT `TurnAddedFilesIntoDiffAgainstEmptyFile`'s `--- a/file`, which would make the *atomic* `git apply` fail expecting the file to exist). Result: the displayed diff pairs `a/file`(empty) with `b/file`(content) → real paths, no git "added in b" header mangling. (WHOLE-mode added files return the raw `--- /dev/null` diff and bypass `TurnAdded` entirely, which is what forced this scheme — `RenderAggregatedPatch(true)` does *not* work here.) - `git apply` and `git diff --no-index` both work **outside a repo** via `-C ` (verified). `--no-index` exits 1 on differences; the task runner only logs that, no popup. - Test churn: only `specific_selection` needed updating — git recomputes hunk context (`@@ -1,4 +1,4 @@` with 3 context lines vs `FormatView`'s `@@ -1,6 +1,6 @@`), exactly the improvement the user wanted. **Needs interactive sign-off** (harness has no real metadata pager, per the standing pattern): the secondary under delta / difftastic / no-pager; that the pager-emitted metadata path resolves a secondary removal to the right file (the masquerade's `a/`/`b/` prefix is stripped host-side for buffer-parse, but a metadata pager emits its own path string — delta strips `a/`/`b/` by convention, so it *should* be clean, but verify); and the post-removal reveal feel. Carry-forward limitation: building a patch in the *old explorer* then escaping to the merged view shows a current secondary (the generation counter covers it), but `e`/click in the secondary would resolve hyperlinks to temp-tree paths (edge; the secondary isn't an edit surface). **Follow-ups (same session, user QoL requests after sign-off — three small commits).** - **Temp dir under lazygit's own (`a73e0ddfa`).** `os.MkdirTemp("", …)` → `os.MkdirTemp(osCommand.GetTempDir(), "custom-patch-")`. `GetTempDir()` is lazygit's per-session `/tmp/lazygit-*` (created at startup, cleaned on exit), so the custom-patch trees honor the configured temp dir and get cleaned up with everything else. - **Inclusion gutter stays visible when the secondary pane is focused (`59ac5e267`).** It was gated on the *Normal* pane being current, so tabbing to the secondary hid it. Now `RefreshInclusionGutter` shows it while *either* pane of the pair is current, finding the side panel via `NextInStack(current)` (not `NextInStack(Normal)`, which panics when Normal isn't on the stack — tabbing to the secondary evicts Normal). `GetOnFocusLost` now *re-evaluates* (calls `RefreshInclusionGutter`) instead of unconditionally hiding — key realization: in `ContextMgr.Push`/`Pop` the stack is updated to the new context *before* `HandleFocusLost` fires, so during focus-lost `Current()` is already the destination; RefreshInclusionGutter thus keeps it shown on a pane-switch and hides it only when focus truly leaves the pair (no flicker). Gutter is draw-time → not e2e-assertable (interactive sign-off), as before. - **Auto-advance to the next hunk after a toggle (`da08df8a8`).** Staging advances because the staged lines are *consumed* from the diff (preserved ordinal lands on the next change); a patch toggle leaves the diff unchanged, so the same ordinal landed back on the just-toggled hunk. Fix: `RevealSelectionAfterStaging` gained an `advanceBy int` (reveals at `ordinal+advanceBy`, clamped); the toggle passes the toggled change-line count (`len(infos)`), landing on the next stageable hunk (hunk mode) or next change line (line mode); staging, unstaging, secondary-removal, and the preserve-net all pass 0. e2e: updated `build_from_main_view` (→ NINE), `build_from_whole_commit_main_view` (→ file2 BETA), `build_multi_file_from_whole_commit_main_view` (the explicit cross-file `NextItem` is now the auto-advance), `keep_selection_after_moving_patch_out_main_view` (navigate back to `+one` after the toggle to span it). Not done (possible refinement): the explorer's smarter "next line of the same included-state" (skip already-included hunks when adding); plain next-hunk is fine for top-to-bottom builds. ### 21.36 Session 26 (2026-07-05): rebased onto master's rename support — two rename gaps for productionization Rebased the branch onto a newer master, which now carries `f84ada494` **"Show renamed files in the custom patch builder."** That commit switched the commit-file loader to `--find-renames`, taught `models.CommitFile` a `PreviousPath` (+`GetPreviousPath()`), and threaded a `previousPath` through the patch builder (`AddFileWhole`/`AddFileLineRange`/`RemoveFileLineRange`/`GetFileIncLineIndices`/`RenderPatchForFile` all gained the parameter) plus `transform.go`'s `StripRename` so a **whole**-file selection carries the rename while a **partial** one strips it and points the header at the new path. This branch forked *before* that work, so its focused-main-view patch code is rename-blind. Two gaps to fix when productionizing — **neither fixed in the prototype** (deliberately; the prototype only needs to demonstrate the mechanism): - **(1) The conflict resolutions hardcode `previousPath = ""`** — `patch_building_from_main_view.go:72` (`RemoveFileLineRange`), `:185` (`GetFileIncLineIndices`), `:200` (`AddFileLineRange`/`RemoveFileLineRange` via the `toggle` alias). Each is the new patch-builder parameter, filled with `""` just to make the rebase compile. Correct for a non-rename, **wrong for a rename**: `getFileInfo(filename, "")` loads the diff for the new path only, so git emits no rename record → a whole-file selection loses the rename, and `StripRename` (which fires only when `mode == PART && previousPath != ""`) can never trigger, so a partial selection can't strip it either. **Production fix:** thread the file's previous path here. Unlike the explorer paths, this code resolves files by absolute path off the diff lines (`patchFilename`), not from a `CommitFile`, so it must look the `CommitFile` up by path and read `GetPreviousPath()` — mirroring the two existing call sites that already do it right: `commits_files_controller.toggleForPatch` (`AddFileWhole/RemoveFile(file.Path, file.PreviousPath)`) and `patch_building_helper.RefreshPatchBuildingPanel` (`ShowFileDiff` + `RenderPatchForFile` both pass `file.PreviousPath`). Reflog patch-building (a separate deferred gap, §21.24/§21.29) needs the same. - **(2) The failing e2e `patch_building/renamed_file_whole`** (added by `f84ada494`) — **not** gap (1), and **not** a patch-*build* regression. It drives the **old explorer** flow (CommitFiles list → `PressPrimaryAction` → `toggleForPatch`, which passes `file.PreviousPath` correctly), and the built patch is correct: the main **Patch** pane renders the full rename, and whole-file apply/removal is fine because `RenderPatchForFile` short-circuits to the raw `info.diff` for `mode == WHOLE && plain`. What's broken is only the **non-plain view rendering**: the secondary "Custom patch" preview (`patch_building_helper.go:136`, `RenderPatchForFile` with `Plain: false` → `Parse().Transform().FormatView()`) renders the rename as a mangled `diff --git a/renamed a/renamed` / `deleted file mode 100644` / `index e69de29..0000000` instead of the rename header + hunk. **Verified passes on master (`ce5a8b61b`), fails on this branch** — so it's this branch's patch-package changes (§ the `parse.go` hunk-length capture, `patch.go`'s new line-number helpers + `IsWellFormed`, `hunk.go`), which predate rename support and don't reproduce a rename header/body through the view formatter. **Production fix:** make `Parse`/`Transform`/`FormatView` rename-aware so `RenderPatchForFile(plain=false)` reproduces the rename; and re-check **partial** rename selections while at it — their *applied* patch also goes through this path (plain, no short-circuit) with `StripRename`, so it's exposed to the same rendering code, not just the preview. Bottom line: the failing test is an expected casualty of "prototype predates renames," same root as (1), not a surprise to worry about.