gui.git, gui.helpers and gui.State are all replaced on a repo switch,
which runs on the UI thread. The background fetch and the external-
change poller read them from their own goroutines, racing the
reassignment. This race can't show up in the integration suite, which
doesn't enable the background routines, so no -race run will ever flag
it; it can only bite real users who switch repos while a background
fetch or poll is in flight.
Capture the objects a routine iteration needs in a single blocking
UI-thread hop before using them, the same pattern the refresh's input
capture uses. For the fetch this has two welcome side effects: the
fetch, the post-fetch refresh's generation baseline, and the recorded
fetch time now all refer to the same repo (the old comment documented
the timestamp's mismatch as a known, unguarded race), and the git
instance the fetch runs through is pinned to that repo's directory, so
a switch mid-fetch can no longer direct in-flight work at the new repo.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
PostFetchRefresh's refresh is the only background refresh carrying a
Then callback, and Then callbacks are not generation-guarded: when the
background fetch's refresh crossed a repo switch, the callback still
ran — in the new repo — and auto-forwarded the new repo's branches
because the old repo's fetch had completed. That was harmless in
practice (the update-ref call compares against the expected old value,
and it only does what the next fetch's auto-forward would do anyway),
but mutating refs in a repo whose fetch never happened is not an action
the user took. Skip the auto-forward when the repo generation changed
since the fetch started.
The generation is captured by the fetch's callers before the fetch
runs, not by PostFetchRefresh itself: the background fetch doesn't
block repo switching and is a network call, so by the time
PostFetchRefresh runs a switch may already have happened — a capture
there (or the one the refresh itself takes) would compare against the
new repo's generation and let the auto-forward through. For the manual
fetch the capture point makes no difference, since a foreground
operation blocks repo switching for its entire duration.
This deliberately guards only this call site rather than making Then
callbacks generation-guarded in general: a Then is an arbitrary
callback, and whether it is safe to skip on a repo switch is a decision
for the author of the call site.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The cached git config runs its `git config` reads through raw
exec.Command calls, outside the pinned git command builder, so they
followed the process working directory. A cache miss on a stale
instance — one still in use by a refresh that crossed a repo switch —
would therefore read the new repo's local config while computing data
for the old one. Give the cache a directory, set once by NewGitCommand
right after it determines the repo paths (the object is created fresh
for every repo switch, so no cross-repo cache invalidation is needed),
and run every config command there.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The refresh workers read a few files at paths relative to the process
working directory: the submodule config read of .gitmodules, the files
refresh's check for conflict markers, and the submodule stash's
existence check. Git commands are pinned to the repo their instance was
created for, but these Go file reads still followed the cwd, so a
background refresh crossing a repo switch would read the new repo's
files while computing data for the old one. Join them with the worktree
root of the instance they belong to. (Most git-state file reads —
working tree state, rebase todos, bisect info — already resolve
against RepoPaths and need no change.)
This also fixes the submodule stash's existence check for nested
submodules: it stat'ed submodule.Path, which is relative to the parent
module, against the repo root — now it uses the submodule's full path,
matching the stash command right below it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The refreshes on focus-in, right after a repo switch, and after
returning from a subprocess are full foreground refreshes, so their
tasks kept Busy() true for as long as the slowest scope took — and any
switch attempt in that window was refused with the "can't switch"
toast. The focus-in one is particularly annoying: focusing lazygit is
often precisely what the user does in order to switch repos, and right
after regaining focus is when a refresh takes longest.
Blocking the switch bought nothing there. The refusal exists for user
operations, whose follow-up work (e.g. a Then callback reading the
model) isn't covered by the switch-safety guards; but these refreshes
merely reload state, and a refresh by itself is now switch-safe: its
git commands run against the repo it was started for, and the
generation guard drops its updates when the repo changed.
We can't just mark them Background, because that flag also decides
whether the files refresh lets git take optional locks to persist its
refreshed stat cache — worth doing for an attended refresh, and the
focus-in refresh (typically running right after external changes) is
the case that profits most. So split the two meanings: a new
DontBlockRepoSwitch option dispatches the refresh's tasks as background
tasks (excluded from Busy()) while keeping the attended optional-locks
behavior. Combining it with Then panics, since Then is not
generation-guarded.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An error returned from a gocui worker is shown to the user in an error
popup. For the branch loader's behind-counts worker that used to be the
"no such ref" popup when a background refresh crossed a repo switch:
the old repo's main branch didn't exist in the new repo. The previous
commits fix that scenario properly — the command now runs against the
repo the refresh was started for — but a stale worker can still fail
legitimately, most plausibly because that repo was deleted after
switching away from it (e.g. removing a worktree). Its results are
dropped anyway, so log the error instead of alarming the user about a
repo they already left.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A background refresh's model writes are dropped by the generation guard
when the repo is switched mid-flight, but its git commands kept running
— and because the refresh read the live git instance at each step, any
command issued after the switch ran against the new repo. Now that git
commands are pinned to the directory of the instance they were built
from, capture the instance once when the refresh starts and run every
scope's git work through it, so a switch-crossing refresh keeps
addressing the repo it was started for.
The instance is captured together with the repo generation, on the UI
thread (where repo switches run), so the pair can't straddle a switch:
an old instance paired with the new generation would compute data from
the old repo and write it into the new repo's model unguarded.
This also removes the refresh workers' unsynchronized reads of the live
instance pointer, which raced its reassignment on the UI thread when a
background refresh crossed a repo switch (foreground refreshes can't
cross one: they keep Busy() true, which refuses the switch).
Two reads keyed app-state by the live instance's repo path on a worker
and now use the captured instance, fixing which repo they file under
when crossing a switch: the pull-request cache, and the "user dismissed
the base-remote prompt" flag. The base-remote menu's handlers keep
reading the live instance: a switch dismisses any open popup, so they
can't run against the wrong repo (and the OnPress body runs under a
foreground task, which blocks switching anyway).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Lazygit changes the process working directory when switching repos, but
work that is still in flight for the previous repo can keep spawning
git commands after the switch — most notably a background refresh. Its
model writes are already dropped by the repo generation guard, but its
git commands would now run against the new repo. That is wasted work at
best; at worst it surfaces spurious error popups (the behind-base-
branch computation failing with "no such ref" when the old repo's main
branch doesn't exist in the new one) and pollutes caches belonging to
the old repo's reusable state (e.g. MainBranches' existing-branches
cache), which the user sees when switching back.
Give the git command builder the directory of the repo it was created
for, and pin every command it produces to that directory. The pinned
directory and the process cwd are identical until a switch happens
(NewGitCommand chdirs to the worktree path right before creating the
builder), so nothing changes in the steady state; the pin only takes
effect for commands built through a previous repo's GitCommand instance
after a switch, which now keep addressing the repo they were built for.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
When the user picks a base remote in the "select remote repository"
prompt, we called setGithubPullRequests directly, bypassing the refresh
machinery — which meant hand-rolling the refresh env that call needs
(with a comment explaining why), and fetching against the branches
captured when the prompt was created. Issue a PULL_REQUESTS-scoped
refresh instead: it re-reads branches and remotes (both fast even in
large repos), fetches against those fresh values, and gets the refresh
machinery's guarantees without any special-casing. The config write is
re-read by the refresh from git config, so it is guaranteed to be
picked up.
The waiting status now covers the config write and the branches/remotes
reload, while the GitHub request itself continues as a background task
— which is how every other pull-request fetch behaves.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Deleting a nested submodule (and updating its URL) chdir'd the whole
process into the parent module, ran its git commands there, and chdir'd
back. Only those commands need to run there, and a process-wide chdir
leaks the parent module's directory into any command another goroutine
spawns during that window (e.g. a background refresh's). Set the
directory on the commands themselves instead.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
To spot slow or anomalous tests across CI runs, record each test's run
duration when LAZYGIT_TEST_TIMING is set (to a file path);
run_integration_tests.sh prints them at the end, sorted by slowest
first. CI sets it for all integration jobs.
The harness appends to a file rather than writing to stdout/stderr
because `go test` captures those and only surfaces them with -v, which
would drown the signal in every test's verbose logs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The watchdog only log.Fatal'd with a message, so a hung test told us
that it timed out but not where it was stuck -- useless for diagnosing
an intermittent deadlock under the race detector. Dump all goroutine
stacks to stderr first (the harness surfaces this process's stderr on
failure), turning a bare timeout into an actionable stack trace.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add one extra integration-tests job that runs the whole suite under the
race detector. A `race` matrix dimension (default false) plus an include
entry adds a single git-latest job with LAZYGIT_RACE_DETECTOR set; races
live in lazygit's own Go code rather than in git, so one git version is
enough, and using latest skips the git-build steps.
The race job skips coverage collection: it's redundant with the non-race
latest job and would only slow the -race build down further.
Go's default 10-minute timeout was enough for running integration tests
normally (both locally and on CI), but with race detection turned on
they can take much longer to run. Increase the timeout unconditionally
to 30 minutes; we don't bother making a distinction between race vs.
normal, because a longer timeout doesn't hurt (I can't recall having hit
the global timeout ever; and we still have the per-test watchdog that
kills an individual test after 40s).
The integration test watchdog fails a test if its recording takes longer
than 40 seconds. Under the race detector everything runs several times
slower, so legitimately slow tests (e.g. a conflicting interactive
rebase) blow that budget and fail even though nothing is actually stuck.
Key the timeout off a build-tag constant: the `race` tag is set
automatically when the binary is built with -race, so a race build gets
a 5x-longer budget while a normal build is unchanged, and the two can't
drift apart the way a runtime flag would. The base 40s stays in one
place; only the multiplier varies by build.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When lazygit exits but leaves behind a subprocess that inherited its
stderr pipe and has detached from the pty, cmd.Wait() blocks in
awaitGoroutines waiting for that pipe to reach EOF -- which never
happens while the straggler is alive. With no WaitDelay set, that wait
is unbounded, so a single leaked process hangs the whole test binary
until the 10-minute global timeout fires and panics. Worse, the timeout
discards whatever lazygit wrote to stderr before exiting (a panic, a
-race report), which is exactly the output needed to diagnose the
failure.
This surfaces under -race, where lazygit runs slow enough to widen the
window for a spawned command to still be alive when lazygit quits, and
it's a blocker for enabling the race detector on CI.
Bound the wait with cmd.WaitDelay so Wait force-closes the pipe and
returns ErrWaitDelay instead of hanging, surface the captured stderr as
the error (falling back to the wait error when nothing was printed), and
kill the child's process group on failure so a straggler can't linger
into a later test or pile up across a run.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When pressing ctrl+z to suspend lazygit, and then `fg` to bring it to
the foreground again, sometimes it wouldn't come to the foreground,
stalling in the background with one core using 100% CPU.
Fixes#5309.
The previous two commits stop gocui from flushing while suspended, but
that guard cannot be fully airtight from gocui's side: it is a
check-then-act on the suspended flag, so a flush racing the suspend
itself (e.g. from a spinner goroutine) could still reach the screen
just as it disengages, and tcell's disengageFinish mutates the cell
buffer without holding the screen lock. Upstream now closes this at
the source (gdamore/tcell#1139): draw() returns immediately on a
disengaged screen, and the draw scan loop can no longer stall on the
width-0 cells that a released cell buffer reports (#5309).
The delta over the previously pinned snapshot is these two fixes, a
CSI R input decode fix, a wasm packaging chore, and dependency bumps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Until now the repaint after fg was accidental: it only happened because
the suspend keybinding handler still had a flush pending on the UI
thread, and only if that flush happened to run after the SIGCONT
handler had re-engaged the screen. Now that flushes are skipped while
suspended, losing that race would leave the screen blank until the next
input event arrives, so schedule a redraw explicitly (#5309).
When suspending with ctrl+z, the suspend keybinding handler disengages
the screen and then sends SIGSTOP to the process group, so the UI
thread freezes at the return from kill(2) with the handler's follow-up
flush still pending. When fg continues the process, that pending flush
races the SIGCONT handler's Resume. If the flush wins, Show() draws
against the disengaged screen, whose cell buffer tcell has released to
0x0 while its width/height still hold the old size; drawCell() then
reports width 0 for the out-of-range cell, the draw loop's
'x += width - 1' never advances, and the UI thread spins forever while
holding the tcell screen lock. Resume in turn blocks forever on that
lock, so the screen never re-engages and no input is ever read again:
the hard stall of #5309, only recoverable by killing the process.
Guard both flush paths with the suspended flag. For the flag to
guarantee that the screen is engaged whenever it is false, Resume must
clear it only after re-engaging (it used to clear it before); Suspend
already sets it before disengaging. This also covers the pre-existing
unsynchronized suspended check in draw(), which is subsumed by the
guards and can go.
The regression test cannot use the demonstrate-then-fix pattern: on
unfixed code the flush goroutine spins holding the screen lock, which
deadlocks any subsequent screen call including the test cleanup's
Close().
When lazygit is suspended with ctrl+z and brought back with fg, nothing
deliberately triggers a redraw. The screen only repaints because the UI
thread happens to have a flush pending from the suspend keybinding, and
that flush races the SIGCONT handler's resume; when it loses in the
right way, the terminal shows a blank screen until the next input event
arrives (#5309).
Grep-based navigation needs manual filtering for the many colliding
method names in this codebase, while gopls answers reference and
implementation questions type-aware and exactly. Scope the guidance to
the symbol tools and keep grep for textual searches: gopls' own MCP
instructions prescribe running vulncheck at session start and
go_file_context after every file read, which costs more than it helps
here. The server is registered per user and machine, so sessions
without it must just fall back to grep rather than try to set it up.
The command log is supposed to show only commands initiated by the user;
these are commands that we run to get information for rendering, so they
pollute the log and are confusing.
Fix two problems that would prevent switching repos or worktrees while a
background fetch was running, especially when the network is very slow
and the fetch takes long. See commit messages for details.
Labelling as ignore-for-release because it fixes a regression that was
introduced after the last release.
Each status used to start a spinner render loop of its own, running on
a worker that inherited the foreground/background flavor of the
status's owner, and exiting only once the entire status stack was
empty. That shape had a real bug: a foreground operation's loop could
be kept alive by someone else's status. Finish a quick operation with
a waiting status while a background fetch's "Fetching..." status is
still showing, and the operation's render loop — a foreground worker
task — keeps ticking until the fetch ends. Busy() stays true for that
whole time, so repo switching is refused even though nothing is in
flight anymore; with a fetch hanging on a slow network, that means
minutes. The shape was also wasteful: overlapping statuses were each
drawn by their own loop (plus a duplicate whenever a task was paused
and resumed while another status was showing), all redundantly
redrawing the same top status.
Replace the per-status loops with a single loop owned by the status
stack as a whole: whoever shows the first status starts it, and it
exits after drawing a final empty frame once the last status is
removed. The claim/release methods on StatusManager keep the loop
flag's transitions atomic with the stack under the one mutex, so a
status added while the loop is about to exit starts a fresh loop
instead of going unrendered.
The loop always runs as a background task now: rendering issues no
git commands, so it never needs to block repo switching, and a
foreground operation's busy-ness is already carried by its own worker
task. This is what fixes the bug above, and it retires the need to
thread a foreground/background flag through the waiting-status
helpers altogether.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The http.Client used for fetching pull requests had no timeout, so on a
network that silently drops packets a request could stay in flight
until the OS-level TCP timeouts kick in, which can take many minutes.
The fetch has no visible status, so nothing tells the user it is still
running; bounding it keeps the refresh's worst case short, and the next
refresh simply tries again.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every full refresh includes the PULL_REQUESTS scope, and the worker it
spawns inherited the refresh's foreground/background flag. Full
foreground refreshes happen at startup, after switching repos or
worktrees, and when the terminal regains focus, so the GitHub API
request ran as a foreground task there, keeping Busy() true until it
completed. On a healthy network that's a few hundred milliseconds and
nobody notices; on a very slow one the request can stall for minutes,
and every attempt to switch repos in that window was refused with
"Can't switch repositories while an operation is in progress" even
though lazygit looked completely idle. (The request has no visible
status; at most, a background fetch hanging on the same bad network was
showing its "Fetching..." spinner, pointing the blame at the wrong
operation.)
The switch-safety guard only needs to wait for operations whose
remaining git commands would run against the wrong repo after a switch.
The pull-request fetch runs no git commands at all, and its model
writes are dropped when the repo generation has changed in the
meantime, so there is no reason for it to block switching.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Several fixes for the last concurrency problems we still had: we used to
access view properties on worker threads, which isn't allowed (writing
to a view itself is fine and guarded by a mutex, but other fields are
not, and even that mutex had a few holes that are plugged here).
With this, our integration test suite seems to be fully deterministic
and race-free, so we also remove the retry safety net (MaxAttempts=2)
that we were using to address flakiness.
Now that we solved all known concurrency issues and our tests should be
100% deterministic, reduce MaxAttempts to 1 so that tests fail
immediately. We don't want to paper over existing flakiness any more.
The bounce model requires that a worker never touch UI-thread-owned
state: it should capture what it needs on the UI thread and pass that
in. Guard the two central accessors -- Model() (the git model) and
Context() (the context manager, which owns the mutable
current-context/stack) -- with a debug-only panic when they're called
off the UI thread. Since the integration tests run with -debug, a stray
worker access now fails deterministically and points at itself, rather
than surfacing later as a probabilistic data race.
One supporting change make the assertion usable: the integration test
driver inspects gui state from the test goroutine, so
GuiDriver.CurrentContext reads the context manager directly rather than
through the now-guarded c.Context().
Contexts() (the registry of context objects) is deliberately left
unguarded: workers legitimately fetch a context to grab its mutex or
check identity, so a blanket assertion there would flag safe accesses.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
hasExecTodos reads Model().Commits. genericMergeCommandImpl evaluates it
when deciding whether to use a subprocess, and on the recursive auto-skip
path that runs on a worker -- so the read raced the UI thread. Bounce it
onto the UI thread there, keyed off the calledFromWorker flag the function
already carries (on the UI-thread entry path the read stays inline).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The file-path suggestions trie is rebuilt asynchronously and then read by
the suggestions search, which runs on an AsyncHandler worker. It lived in
Model().FilesTrie, so that worker read the (UI-thread-only) model. Move
it to an atomic pointer on the SuggestionsHelper instead: it's the only
place that uses it, the helper is recreated per repo (so the cache still
resets on a repo switch), and an atomic pointer is safe to store from the
build and load from the search worker.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "merge conflicts" refresh scope ran on a worker like the others, but
unlike them it does UI work rather than git work: RefreshMergeState reads
the current context and renders (or escapes) the merge-conflicts view.
Reading the context manager and rendering from a worker races the UI
thread. Bounce it onto the UI thread with onUIThreadUnlessRepoChanged,
exactly as the staging and patch-building scopes already do.
Running on the UI thread also lets EscapeMerge push the files context
directly instead of deferring the push to a separate UI task; it only
needs to drop the merge-conflicts mutex first, because the push
renders the newly focused file, which can take the mutex again. The
deferred push could lose a race against the same refresh's prompt to
continue the rebase/merge: if the prompt opened between
RefreshMergeState and the deferred push, the push declined to cover
the popup and was dropped, so closing the prompt landed the user in
the emptied merge conflicts view.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
RefreshSuggestions dispatched to an AsyncHandler worker that read
State.FindSuggestions and the prompt's TextArea (via GetPromptInput)
from the worker goroutine. The main thread rewrites both in
preparePromptPanel when it (re)creates a prompt panel, so an in-flight
suggestions worker races those writes -- two data races surfaced under
-race (filter_by_path/reword_commit_in_filtering_mode).
Capture both on the UI thread (RefreshSuggestions is only ever called
from UI-thread handlers) before dispatching to the worker. This is also
more correct: we search for the input as it was when dispatched, which
is what this request's AsyncHandler id corresponds to.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Dropping a range of stashes ran a refresh after each drop. A refresh
issued from the UI thread does its git work on a worker and applies the
model update in the background, so firing one per iteration let the
workers race: an earlier drop's refresh (which read a stash list that
still contained a later-dropped entry) could apply its result last,
leaving the stash view showing an entry that git had already removed.
Refresh once, after all the drops, so a single worker reads the final
stash list. The indices are captured up front and dropped highest-first,
so the remaining lower indices stay valid without an intervening
refresh. It's also cheaper: one `git stash list` instead of one per
entry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
moveMainContextToTop copies the current top view's content into the view
it's promoting, to avoid a flicker. The source can be a main view with a
live streaming task (e.g. resolving a conflict promotes the merge-conflicts
view over a main view that's mid-diff), and CopyContent both read and
published that source's buffer unsafely:
- it read the source's lines/viewLines while locking only the
destination, racing the task's concurrent Write; and
- it aliased the source's row slices into the destination, so the
source's ongoing appends (growslice reading the shared array) and
refreshViewLinesIfNeeded's in-place wrapping-cache writes (&lines[i])
kept racing this view's rendering after the copy.
Lock the source for the read, and shallow-clone the row slices so the
destination gets its own arrays. The per-row cell data is immutable once
written, so it stays shared -- the clone cost is proportional to the
number of rows, not their contents.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The patch-building scope ran RefreshPatchBuildingPanel directly on the
refresh worker, where it read the commit-files selection and set the patch
view's origin off the UI thread — the latter raced the UI thread's draw.
Bounce it onto the UI thread, exactly as the staging panel just above
already does, guarded on the generation so a repo switch drops it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The custom-patch git operations (move/pull/delete patch, and their rebase
continuations) run on worker goroutines and call PatchBuilder.Reset when
they've consumed the patch, clearing To and the fileInfoMap. Meanwhile the
UI thread reads that state every layout — the options bar and the mode
indicator both call Active() — so the reset raced the render.
Add a mutex. The map's entries are only ever touched on the UI thread, so
the lock only has to serialize the To field and the fileInfoMap pointer:
readers snapshot the pointer under the lock and iterate the local, and
getFileInfo drops the lock across its git diff I/O rather than holding it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The test harness enqueued ErrQuit after a test finished, waited for the
program to go idle, then slept a fixed second and declared "gocui should
have already exited" if it hadn't. That fixed grace is fragile: under the
race detector the shutdown legitimately takes longer than a second, so
nearly every test failed with that message even though nothing was wrong.
Wait for the main loop to actually return instead. gocui now closes a
loopExited channel when MainLoop exits, and the harness blocks on it; the
existing 40s watchdog still fails a test whose loop genuinely never quits.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
PopupMutex guarded CurrentPopupOpts against a popup being created on a
worker goroutine while the UI thread deactivated it, or reset it on a
repo switch. Now that popup and menu creation is bounced onto the UI
thread, every access to CurrentPopupOpts — create, deactivate, and the
reset-on-switch (which already runs on the UI thread) — happens on the
one goroutine, so the mutex protects nothing.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Raising a popup or menu pushes a context and mutates the popup views, so
it must happen on the UI thread. But it can be triggered from a worker
goroutine — for example a WithWaitingStatus handler that hits a merge
conflict and calls PromptForConflictHandling, or a worker that shows a
confirmation — where it raced the UI thread's layout and draw code.
Bounce the creation onto the UI thread at the one point where the popup
and menu producers are injected into the popup handler, so every caller
stays oblivious to the threading. For a caller that is already on the UI
thread this adds no delay: the main loop drains the enqueued closure in
the same event-processing cycle, before it draws.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a command task reaches EOF it runs onEndOfInput, which reads the
view's line height (and thus its dimensions) to decide whether to scroll,
sets the view's origin, and flushes stale cells. Reading the dimensions
and setting the origin are UI-thread-only, but this ran on the task's own
goroutine, racing the UI thread. Bounce onEndOfInput onto the UI thread,
as we already do for the new-task origin reset. It's once per render, so
it doesn't add the per-line UI-thread churn that streaming the content
would.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A view's line buffer, its viewLines/tainted flags, and its hover state
are all written from the command-task goroutine (under writeMutex) as it
renders. But three accessors reached that same state from the UI thread
without the lock: SetView and the GUI-resize path cleared a view's lines
directly, viewsToRedrawContentOnly read the tainted flag, and Buffer read
the line buffer. Each raced a rendering task.
Guard them with writeMutex, matching the view's other buffer accessors.
These are reads/clears of state writeMutex already protects, not new
callers of it -- the view's geometry stays outside the mutex.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A command task streams its output into a view from its own goroutine. To
track soft-wraps (so cursor-positioning escapes from a pager land on the
right line) the write path read the view's live InnerWidth, and the pty
setup read its InnerSize -- both off the UI thread, racing the UI thread
mutating the view's dimensions during layout.
Capture the width on the UI thread instead and hand it to the task: the
escape interpreter keeps a screenColMax it reads from, seeded in NewView
and refreshed per render via View.SetContentWidth (called from
newCmdTask/newPtyTask before the task's goroutine starts), and the pty
size is computed in the after-layout callback rather than in the task's
start func. The view's dimensions stay UI-thread-only; the task uses the
snapshot rather than reading them live.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The throttle flag is set from the goroutine that watches a task for
being stopped, and read when the next task starts up -- two different
goroutines, so the plain bool field was a data race.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
