The escape interpreter errors on anything outside the handful of
sequences it understands (SGR, EL, OSC 8 hyperlinks), and view.go then
renders the unparsed bytes as text cells.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
For a submodule conflict (where the two branches point the submodule at
different commits, resulting in a `UU` status), pressing space would
show a confusing "Nothing to stage…" error, and enter just stepped into
the submodule; neither is helpful for resolving the conflict. Now both
space and enter open a dialog where you can pick the current commit or
the incoming commit, each shown with its head commit subject so you know
what you're choosing. And the main panel explains the conflict and lists
the commits each side added, so you can see how they diverged before
deciding.
This now behaves very similarly to the way you resolve non-textual
conflicts for text files (e.g. `AU` or `UD`). Speaking of which: for
these it was still possible to press space to stage them, which simply
ran `git add`, whose behavior in this case is to keep the file. This is
neither obvious nor symmetric, so we change this to route space to the
conflict picker too, like enter.
GetOnRenderToMain had grown to handle five distinct rendering cases inline (no
selection, submodule conflict, inline text conflict, non-textual text conflict,
and the normal working-tree diff), which made it hard to follow. Split each case
into its own method so the function reads as a short dispatcher, and pull the
repeated main-view boilerplate into renderToMainWithTask. Pure refactor; no
behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a conflicted submodule is selected, the main view shows the commits
each side added relative to their common ancestor as two indented logs,
labelled current and incoming, so it's clear which commit each side would
resolve to.
The logs aren't truncated (the view scrolls). If a side added no commits
of its own (e.g. it was rewound to an ancestor of the other), its head
commit is shown instead.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When both sides of a merge moved a submodule's gitlink, git reports it as "UU".
Pressing space used to fall into the submodule no-op guard and pop the confusing
"Nothing to stage..." error, and enter just entered the submodule, which does
nothing to resolve the superproject conflict.
Treat a conflicted submodule like the other non-textual conflicts: both space
and enter now open a picker offering the two candidate commits, "current" and
"incoming", each labelled with its summary. `git checkout --ours/--theirs` is a
no-op on gitlinks, so we resolve by checking the submodule out at the chosen
commit and staging it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
For a non-textual conflict (e.g. DD/AU/UA/UD/DU), pressing space used to run the
normal stage path, which did something unclear: `git add` happens to resolve the
conflict by keeping the file, but that's neither obvious nor symmetric. Route a
single such file to the same Keep/Delete picker that enter opens, so space and
enter agree.
For a range selection that includes one of these conflicts, staging makes no
sense, so disable it with a toast that points the user at resolving them one at
a time. (Entering a range was already disabled with the standard toast.)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Some merge conflicts can't be resolved by editing markers in the merge view;
they require a dialog that picks one side (the "non-textual" conflicts like
DD/AU/UA/UD/DU). Both `enter` and, soon, `space` need to recognize these, so
pull the test into a shared predicate and rename handleNonInlineConflict to
openConflictResolutionMenu to match.
Restructure EnterFile so the predicate is checked first, ahead of the submodule
and inline-conflict branches. This is its final shape: upcoming commits only add
the submodule case to the predicate, with no further reordering. Behavior is
unchanged here, since the predicate is currently false for submodules.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The status panel already binds the universal edit key to "edit config
file", but that's only reachable while the status panel is focused. Add
a dedicated global binding (alt+shift+c) so the config file can be
opened from anywhere.
The status panel already binds the universal edit key to "edit config
file", but that's only reachable while the status panel is focused. Add
a dedicated global binding (alt+shift+c) so the config file can be
opened from anywhere.
The "edit config file" command is about to gain a second, global
keybinding alongside the existing status-panel one. Moving its body into
an action struct (the convention GlobalController already follows for
all its handlers) lets both controllers delegate to one implementation.
OpenFile (`o`) is for opening a file as if it was double-clicked in
Finder/Explorer; this is useful for binary files like PNGs, but never
for text files. You want to edit them, and there's `e` for that.
Lazygit's left-hand side panels — and the tabs within them — have always
had a fixed arrangement. This adds a `gui.sidePanels` option so you can
lay them out the way you want.
You can:
- Reorder the panels
- Hide panels you don't use
- Regroup which panels share a slot as tabs
- Promote a tab to its own top-level panel — e.g. pull Worktrees out of
the Files panel so it's always visible
#### How it works
`gui.sidePanels` is a top-to-bottom list. Each entry is a list of names
that share one panel as tabs. The default is
```yml
gui:
sidePanels:
- [status]
- [files, worktrees, submodules]
- [branches, remotes, tags]
- [commits, reflog]
- [stash]
```
If you want to promote `worktrees` to a side panel of its own, and never
want to see stashes, use
```yml
gui:
sidePanels:
- [status]
- [files, submodules]
- [worktrees]
- [branches, remotes, tags]
- [commits, reflog]
```
Exercises the path the live reload relies on: a per-repo lazygit.yml
sets a different side panel layout, and switching between repos
re-applies each one's own layout (the new-repo path for the cloned repo,
the cached-repo path on switching back).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When the config file changes and lazygit regains focus it reloads the
config, but the side panel window assignments, default views, tab
strips, and z-order were only ever set up on repo entry, so a changed
sidePanels wouldn't take effect until restart. Re-apply it from the
reload path: reassign windows and default views and restore each panel's
default tab.
The focused panel needs care: resetting it to its default tab would
leave the focused tab hidden behind that default tab, so the panel looks
unfocused even though its tab is selected. Re-focus the current context
so its tab stays shown and highlighted; only when the new config hides
the focused panel entirely do we move focus to the default side panel.
Tab strips are already refreshed via configureViewProperties.
Side panel tabs share a window, so which tab is shown is decided by view
z-order rather than the visibility flag (every tab in a window is
'visible'). Tests had no way to assert which tab is actually drawn in
front, which is distinct from which view has keyboard focus. Expose the
window's top view and add an IsActiveTab assertion built on it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit reloads changed config files when its terminal window regains
focus, but the test harness had no way to simulate that focus event, so
the live config-reload path was untestable. Add a focus event to the
replayed-events queue and expose it through the GuiDriver as FocusIn.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The tab-assignment loop only ever set a view's tabs; it never cleared them.
That was fine when the groupings were fixed, but with gui.sidePanels a
config reload can turn a tab into a standalone panel, and the old tab strip
would linger on its title. Index the tab strips by view name and assign to
every view, so views that dropped out of a multi-tab panel get their tabs
cleared. No change for a given config; this only matters across a reload.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Cover the three things gui.sidePanels enables: reordering the panels
(swapping branches and commits, checked via their jump keys), hiding a
panel (omitting stash, checked by cycling past the last panel and wrapping
to the first), and promoting a tab to its own panel (worktrees becomes a
top-level panel reachable by a jump key, and the files panel's remaining
tabs cycle straight to submodules).
The tests drive focus with explicit jump keys rather than ViewDriver.Focus,
which assumes the default panel layout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Within a window the visible tab is whichever view sits on top in the
z-order, and onRepoViewReset establishes that z-order from a fixed list
that needn't agree with the configured tab order. After ordering the
views, bring each panel's first configured tab to the top so that, for a
panel whose tabs have been reordered, the configured first tab is the one
shown before the panel is focused. No effect on the default layout.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
In squashed mode (short terminals) the unfocused side panels each reserve
a row and the focused panel takes whatever is left, so once the unfocused
panels' rows fill the height the focused panel collapses to nothing and
panels below it render off-screen. The fixed floor of 9 was tuned for five
panels; with the panel count now configurable (and promotion allowing up
to ten), grow the floor by one per panel so we show the "not enough space"
view instead of a broken layout. Five panels still floor at 9.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These two views only ever appeared as tabs (of the files and commits
panels), so unlike the other side views they had no title set; the tab
strip supplied their label. Once a tab can be promoted to its own panel
they can appear without a tab strip, so set their titles like the others.
This has no effect in the default layout, where both are always tabs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the hard-coded side panel order, tab groupings, and window
assignments with values resolved from the gui.sidePanels config. The panel
order (SideWindows and the layout boxes), the tab strips (viewTabMap), the
per-context window names, each window's default view, and the jump-label
groups all now come from the config rather than from five separate
hard-coded lists.
A panel's window name is the name of its first tab, and panels not listed
in the config get their own window name so their views stay hidden instead
of overlapping a visible panel. Three small lookups translate config names
into views, tab titles, and contexts; a test keeps them in sync with the
set of valid names. The lookups are split this way (rather than one
resolver) because configureViewProperties runs before the context tree
exists, so the title/view lookups must not depend on it.
The config is applied to a repo's contexts via applySidePanelConfig on
every repo entry, including the cached-repo path: a repo's per-repo config
can differ from the previously visited one's, so each repo's contexts must
be (re)assigned from its own config rather than kept from when they were
first built.
With the default config this reproduces today's layout exactly.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The number of side panels is about to become configurable, so a fixed
count of jump-to-panel keys no longer makes sense: a user who configures
six panels shouldn't be forced to also extend jumpToBlock, and one who
hides a panel shouldn't have to trim it. Drop the count check entirely
(individual keys are still validated) and assign keys to panels
positionally, for as many panels as there are keys. Surplus panels go
without a jump key but remain reachable via the next/previous-panel keys.
This also removes the log.Fatal that the count check guarded against.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This adds the user-facing surface for configuring the side panels: their
order, which ones are visible, and how tabs are grouped into panels. Each
entry is either a single panel name or a list of names sharing one panel
as tabs, mirroring how the Keybinding type accepts a scalar or a sequence;
the JSON schema restricts the names to the known set so editors can offer
completion and catch typos. The default reproduces today's layout exactly.
Validation rejects unknown or duplicated names, and requires the files,
branches, and commits panels to always be present: a lot of code focuses
those directly (e.g. after resolving a conflict or popping a stash), so
allowing them to be hidden would let that code focus a hidden panel.
Nothing reads the option yet; the layout still uses the hard-coded order.
Wiring follows in a later commit so the inert surface (and its generated
docs and schema) can be reviewed on its own.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The jump-label prefixes were assigned to each side view by name, twice
(once for the on case, once for off), so the panel-to-views grouping and
the panel order were baked into 28 positional statements. Express the
grouping once as a slice of view groups and loop over it, deriving each
panel's label from its index. The label lookup is now bounds-checked, so
it no longer assumes exactly as many jump bindings as panels. Behavior is
unchanged; this prepares the grouping to come from config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The remote-branches context is a transient guest that takes over a host
window when you drill into a remote. SubCommits and CommitFiles already
adopt their parent's window via SetWindowName when shown; RemoteBranches
relied instead on its static window name ("branches") matching the remotes
context's window. That assumption only holds while remotes lives in the
branches panel. Adopt the parent's window like the other transient guests
so remote branches render in the right place once panels are configurable.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The three branches of sidePanelChildren each spelled out the five side
windows by name, so the panel order lived in three places and the
status/stash sizing special-cases were tangled into positional literals.
Map each branch over one `windows` slice instead, and fold the
normal-height special-cases (status's fixed height, stash's
collapse-unless-focused) into a single per-window function. Behavior is
unchanged; this isolates the ordering so it can later come from config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Record the working preference that calls which come up during
implementation (and weren't settled in planning) should be raised and
decided together, not made unilaterally and discovered later in the diff.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit builds a shell command by interpolating Quote'd arguments into a
template and running the result via `cmd /c`. Several things were wrong
on Windows:
- Quote emitted bash-style `\"…\"` quoting, which cmd.exe doesn't
understand. Making it usable at all previously required a fragile
round-trip through str.ToArgv and re-escaping.
- The assembled command line was handed to `cmd /c` without `/s`, so
cmd's default rules stripped the wrong quotes once the line contained
more than two of them (e.g. a quoted editor path at a location with
spaces, plus a quoted filename that also contains spaces).
- Shell metacharacters were escaped with `^` (`&` → `^&`, etc.), which
neutralised command chaining, pipes, redirection and `%VAR%` expansion
in custom commands.
Quote now emits the standard Windows convention directly, and NewShell
hands cmd.exe the fully-assembled line verbatim via SysProcAttr.CmdLine,
wrapped as `cmd /s /c "<command>"`. The /s flag strips exactly the outer
quote pair we add, leaving each argument's own quoting intact. With the
`^` escaping gone, metacharacters in a custom command reach cmd as the
author intended; this also removes the spurious `^` reported in #3092.
Fixes#5560Fixes#2427Fixes#4147
The unit tests only assert the arguments lazygit constructs; they can't
catch cmd.exe's own quote-stripping, which is where #5560 actually
manifested. This test builds a small editor executable, places it and
the file it opens at paths containing spaces, runs it through real
cmd.exe via NewShell, and checks the editor received the intended args.
It runs only on Windows.
Co-Authored-By: Antoine Gaudreau Simard <a.simard@multidev.net>
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
lazygit builds a shell command by interpolating Quote'd arguments into a
template and running the result via `cmd /c`. Several things were wrong
on Windows:
- Quote emitted bash-style `\"…\"` quoting, which cmd.exe doesn't
understand. Making it usable at all previously required a fragile
round-trip through str.ToArgv and re-escaping.
- The assembled command line was handed to `cmd /c` without `/s`, so
cmd's default rules stripped the wrong quotes once the line contained
more than two of them (e.g. a quoted editor path at a location with
spaces, plus a quoted filename that also contains spaces).
- Shell metacharacters were escaped with `^` (`&` → `^&`, etc.), which
neutralised command chaining, pipes, redirection and `%VAR%` expansion
in custom commands.
Quote now emits the standard Windows convention directly, and NewShell
hands cmd.exe the fully-assembled line verbatim via SysProcAttr.CmdLine,
wrapped as `cmd /s /c "<command>"`. The /s flag strips exactly the outer
quote pair we add, leaving each argument's own quoting intact. With the
`^` escaping gone, metacharacters in a custom command reach cmd as the
author intended; this also removes the spurious `^` reported in #3092.
Fixes#5560Fixes#2427Fixes#4147
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On Windows, NewShell escapes shell metacharacters (`&`, `|`, `<`, `>`,
`%`) with `^` and splits the command into separate arguments. The
operators in a custom command therefore never reach cmd as operators,
so command chaining (`&&`), pipes, redirection and `%VAR%` expansion all
silently break (#2427, #4147, #5113; the stray `^` is also what #3092
reports).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On Windows, Quote wraps arguments in bash-style `\"…\"` and rewrites
embedded double quotes as `"'"'"`. Neither convention is understood by
cmd.exe or CommandLineToArgvW, so commands built from quoted arguments
are mis-parsed once they contain quotes or spaces (#5560).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
`just e2e` used to be the *visible-UI* test runner. Running it with no
arguments launched every integration test in a visible UI — painfully
slow — and it was easy to type `just e2e` out of habit when you actually
meant `just e2e-all` (the headless run-all). This PR reshuffles the
recipes so the common, fast path is the one with the shortest name.
## Recipe changes
| Command | Before | After |
| --- | --- | --- |
| `just e2e` | All tests, **visible UI** (very slow) | All tests,
**headless** (what CI runs) |
| `just e2e <name>` | — (no such target) | That one test, **headless** |
| `just e2e-cli [--slow\|--sandbox\|--debug] <name>` | — | A test in a
**visible UI** (the old `e2e`) |
| `just e2e-tui` | unchanged | unchanged |
| `just e2e-all` | All tests, headless | **removed** (now redundant) |
`just e2e` and `just e2e-cli` accept either a test name
(`submodule/reset`) or a full file path
(`pkg/integration/tests/submodule/reset.go`), and `e2e-cli`/`e2e-tui`
mirror the two `cmd/integration_test/main.go` subcommands (`cli` and
`tui`).
Also added zsh tab-completion for the test names, so `just e2e sub<Tab>`
expands to `just e2e submodule/`, then drills into the tests within.
For running an integration test just to see if it fails or succeeds,
headless mode is sufficient and actually better, because it works in
small terminals like vscode's bottom panel; the "main.go cli" way of
running tests tends to fail there because the layout renders differently
in such a small window. Headless tests use a fixed window size, so they
don't have this problem. It's also slightly faster.
The other vscode tasks (slow and sandbox) are unchanged, they only make
sense with a visible UI.
The integration README still described the raw `go run cmd/integration_test`
and `go test` invocations, which are easy to get wrong (the headless go-test
command in particular) and don't match how we actually run the tests. Rewrite
the running/debugging/sandbox instructions around the justfile's e2e recipes
instead, and point at the optional zsh completion script. Also switch the
test-list regeneration hint to `just generate`, matching the rest of our docs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
just's completion is clap-dynamic and exposes no hook for completing a
recipe's arguments, so `just e2e <Tab>` couldn't suggest anything. Wrap
just's completer: for the e2e/e2e-cli recipes, complete the test names
found under pkg/integration/tests/, delegating everything else back to
just.
The names are fed to _multi_parts so they complete one "/"-separated
segment at a time — an empty <Tab> offers just the categories, then
drills into the tests within a category — and the .go extension and the
shared helper files are stripped so the candidates are exactly the names
the recipe accepts.
Source it from ~/.zshrc (after compinit) to enable; it's a no-op without
just installed and only activates inside a repo with a justfile and a
pkg/integration/tests/ directory.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
`just e2e` was the visible-UI runner, but it's only useful for a single test
(and even then only with --sandbox/--slow); running it without arguments is far
too slow, yet it was easy to invoke by reflex when `just e2e-all` (run all
headlessly) was meant.
Make `just e2e` the everyday headless runner: no arguments runs the whole
suite (what e2e-all did), and a test name runs just that one headlessly via
`go test -run` — which we had no target for before. The visible-UI runner moves
to `e2e-cli`, pairing with the existing `e2e-tui` (the two main.go subcommands).
e2e-all is now redundant and removed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With the recently added external change detection, it happens more often
now that we refresh the commits list because an agent made a commit in
the background. In this case, if we keep the selection index the same,
it now points at a different commit, making the main view show a
different commit too, which is confusing and annoying. To fix this,
track the selected commit and range anchor by hash before reloading,
then restore those rows if both hashes still exist. This also allows us
to get rid of some bespoke code that did this for the specific cases of
reverting a commit or cherry-picking commits, because those are now
handled by the generic mechanism.
Starting an interactive rebase (the `edit` command and quick-start) used
to capture the selected commit range by hash before starting the rebase
and restore it afterwards, because new update-ref lines for stacked
branches can shift the commits' positions in the list. The generic
keep-selection-by-hash mechanism now does exactly this for every refresh,
including these, so the bespoke code is redundant.
This relies on the previous commit, which taught the generic matcher to
handle the case where the selected commit turns into a rebase TODO entry
while it's being edited - something the bespoke code handled implicitly
by matching on hash alone.
When restoring the commit selection after a refresh we match by hash and
TODO status. The TODO status is part of the match so that a commit being
reverted or cherry-picked is matched to the real commit rather than to
the rebase TODO entry that shares its hash.
But a selected commit can also change its TODO status across a refresh:
when starting an interactive rebase that stops to edit it, the real
commit becomes a TODO entry. Fall back to matching by hash alone when
there is no exact match, so the selection is still restored in that case.
The next commit relies on this to remove bespoke selection-restoration
code in the local commits controller that matched by hash alone, which
the generic mechanism otherwise wouldn't fully replace.
With the recently added external change detection, it happens more often
now that we refresh the commits list because an agent made a commit in
the background. In this case, if we keep the selection index the same,
it now points at a different commit, making the main view show a
different commit too, which is confusing and annoying. To fix this,
track the selected commit and range anchor by hash before reloading,
then restore those rows if both hashes still exist. This also allows us
to get rid of some bespoke code that did this for the specific cases of
reverting a commit or cherry-picking commits, because those are now
handled by the generic mechanism.
Preparation for the next commit, which selects the newly created commit
after a commit succeeds, while leaving the selection alone on failure.
For now success and failure use the same refresh options, so behavior is
unchanged.
