refreshBranches now loads the branches (and worktrees) on the worker and
writes Model.Branches, the pull-requests map, Model.Worktrees, and the
restored branch selection in an onUIThreadUnlessRepoChanged bounce. The
selection restore and rebuildPullRequestsMap run in the bounce so they
see the branches we just wrote; the LocalCommits re-render (for branch
head visualization) moves into the same bounce.
refreshStatus is adjusted to read the checked-out branch and the linked
worktree name inside its bounce rather than on the worker: both derive
from models (Branches, Worktrees) that are now written via bounces, so
reading them on the worker would format the status from stale values —
which showed up as the status line dropping the "(worktree)" suffix right
after entering a submodule or switching worktrees. The git work
(WorkingTreeState) stays on the worker.
Two callers that read the branches model right after a SYNC branches
refresh move their reads into Then:
- BranchesHelper.PostFetchRefresh: AutoForwardBranches reads Model.Branches,
so it runs in Then (preserving that a fetch error is still returned to
the caller and that background auto-forward errors aren't surfaced as a
popup).
- BranchesController rename: the re-select-by-name loop runs in Then.
RefreshingBranchesMutex is left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshCommitsWithLimit now loads the commits, working-tree state and
bisect info on the worker and writes them all — Model.Commits,
Model.BisectInfo, Model.WorkingTreeStateAtLastCommitRefresh,
Model.CheckedOutBranch, the authors, and the restored commit selection —
in a single onUIThreadUnlessRepoChanged bounce. The selection restore
(SelectHeadCommit / KeepCommitSelectionByHash) has to run in the bounce
because it reads the freshly-loaded commits; the FocusLine scroll is
enqueued from within the bounce so it still runs after refreshView's
re-render, as before.
refForLog no longer writes Model.BisectInfo as a side effect; it returns
the bisect info it read, and the bounce writes it, keeping that model
write on the UI thread. No caller reads Model.BisectInfo synchronously
after a refresh (the bisect controller reads Git().Bisect.GetInfo()
directly), so this is safe.
refreshCommitsAndCommitFiles's post-refresh re-init of the commit files
context depends on that restored selection, so it reads the selection in
a bounce and dispatches the commit-files git work back to a worker.
LocalCommitsMutex / AuthorsMutex are left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshGithubPullRequests and setGithubPullRequests now do their network
work on the worker and write Model.PullRequests / PullRequestsMap in an
onUIThreadUnlessRepoChanged bounce (the "no github remotes" and "no base
remote" early-returns clear them the same way). rebuildPullRequestsMap
moves into the bounce so the map is built from Model.Branches and
Model.Remotes as they stand on the UI thread — after those scopes'
refreshes have applied their own bounces — rather than from whatever the
worker happened to see.
The remaining worker-side reads of Model.Branches (to pick which upstream
branches to query) are the same not-yet-addressed worker-read race that
applies to the other bounced scopes.
RefreshingPullRequestsMutex is left in place for the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStatus computes the status line on the calling goroutine (as
before) but now writes it to the status view in an
onUIThreadUnlessRepoChanged bounce rather than calling SetViewContent
directly from the worker. RefreshingStatusMutex is left in place for now;
it only guards the compute phase between concurrent callers and comes out
in the mutex cleanup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshReflogCommits now does the git fetch on the worker and computes
the new ReflogCommits / FilteredReflogCommits values (still reading the
existing slices for the incremental prepend), then writes them in an
onUIThreadUnlessRepoChanged bounce. The freshly-computed reflog is still
returned for the branches load, so recency sorting is unaffected by the
write now landing on the UI thread (see the previous commit).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
BranchLoader.Load reads the reflog commits to sort branches by recency.
Today it reads them straight from Model.ReflogCommits, which works
because in the recency path the reflog refresh writes that field
synchronously just before the branches refresh reads it (same goroutine,
sequential).
An upcoming commit bounces the reflog model write onto the UI thread, at
which point Model.ReflogCommits wouldn't be updated yet when branches
runs — branches would sort by the previous refresh's reflog. To decouple
the branches load from *when* that write lands, pass the reflog commits
to refreshBranches explicitly: refreshReflogCommits now returns the
commits it loaded, and the recency path hands them straight to
refreshBranches. The non-recency path (branches and reflog run
concurrently, as before) keeps passing Model.ReflogCommits.
Pure refactor: behavior is identical, since the value passed is exactly
what Load read from the model before.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshRemotes now loads the remotes on the worker and writes
Model.Remotes, rebuilds the pull-requests map, and updates the selected
remote's RemoteBranches inside an onUIThreadUnlessRepoChanged bounce.
RemotesController.addAndCheckoutRemote read Model.Remotes right after its
SYNC REMOTES refresh to select the newly-added remote; since that write
now bounces, the selection (and the follow-up fetch) move into Then so
they run against the post-refresh model rather than the stale one.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshSubCommitsWithLimit now loads the sub-commits on the worker and
writes Model.SubCommits (and folds their authors into Model.Authors via
RefreshAuthors) inside an onUIThreadUnlessRepoChanged bounce.
SubCommitsMutex and AuthorsMutex are left in place: the former is shared
with setSubCommits, the latter with the commits refresh's RefreshAuthors
call, so both come out only once those other writers are on the UI thread
too.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshRebaseCommits now computes the merged rebasing commits and working
tree state on the worker and writes Model.Commits /
WorkingTreeStateAtLastCommitRefresh in an onUIThreadUnlessRepoChanged
bounce. LocalCommitsMutex is left in place for now; it's shared with the
commits and branches refreshes and comes out once they're all bounced.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshWorktrees now writes Model.Worktrees in an
onUIThreadUnlessRepoChanged bounce. loadWorktrees becomes a pure loader
that returns the worktrees instead of writing them, since it's shared
with refreshBranches; refreshWorktrees bounces the result, and the
branches call site writes it directly for now (that write moves into
refreshBranches's own bounce when that scope is migrated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStashEntries now loads the stash entries on the worker and writes
Model.StashEntries in an onUIThreadUnlessRepoChanged bounce.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshTags now captures the repo generation, loads the tags on the
worker, and writes Model.Tags in an onUIThreadUnlessRepoChanged bounce
rather than directly from the worker goroutine.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshCommitFilesContext now enqueues the Model.CommitFiles write and
CommitFileTreeViewModel.SetTree() call via OnUIThread, instead of running
them directly on the worker goroutine that drives async refreshes. This is
what makes moving SwitchToDiffFilesController's post-refresh work into Then
(previous commit) actually necessary, rather than just future-proofing.
Same repo-switch hazard as the FILES bounce, closed the same way: it
captures the repo generation before the git work and bounces through
onUIThreadUnlessRepoChanged, so the write is dropped if the user switched
repos while it was in flight.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
SwitchToDiffFilesController.enter calls SelectPath and Context.Push
right after a (SYNC, by default) COMMIT_FILES refresh. This works today
because the model write currently happens synchronously in the worker
before Refresh's wg.Wait() returns, but an upcoming commit will bounce
that write onto the UI thread instead, at which point wg.Wait() no
longer guarantees it's been applied, and SelectPath would operate on a
stale tree.
Move both calls into Then ahead of that change, for the same reason as
the earlier FILES-scope commit: Then is already queued via OnUIThread,
so this is behavior-preserving on its own.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
FileTreeViewModel.RWMutex is removed along with the
withFileTreeViewModelMutex wrapper in FilesController that RLocked it:
every writer (the bounce closure, previous commit) and every reader (key
handlers, disabled-reason callbacks) now runs on the UI thread, so the
mutex is redundant.
RefreshingFilesMutex is removed entirely, including its last use in
repos_helper's DispatchSwitchTo. That use predates the bounce and was
never about FilesController's optimistic-rendering concern; it serialized
a repo switch's onNewRepo() against an in-flight FILES refresh for the
repo being switched away from, so that a slow refresh from the old repo
couldn't write into the freshly-reset model for the new one. Bouncing the
write already broke that guarantee on its own terms — the mutex's critical
section never covered the bounced closure's actual execution, only the
(now-removed) code that enqueued it — so by this point it was only still
locked here without protecting anything real; the previous commit's
repo-generation guard is what now actually closes that race, making this
lock fully redundant rather than just relocated.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
refreshStateFiles now does its git work on the worker and enqueues a
single OnUIThread closure that writes Model.Submodules, Model.Files, and
the FileTreeViewModel state together, instead of writing them directly
from the worker goroutine. refreshStateSubmoduleConfigs becomes a pure
getter (returns the configs; no model write) so the result can be
threaded into that same bounce.
The STAGING handler wraps RefreshStagingPanel in OnUIThread after
fileWg.Wait() so it sees the post-bounce file model rather than the stale
pre-refresh one — without this it would race the files bounce queued just
above it.
Bouncing the write opens a hazard the old synchronous write didn't have:
if the user switches repos while this refresh is in flight, the queued
closure would fire after resetState has replaced the model with a fresh
one for the new repo, silently overwriting it with the previous repo's
files. Guard against this with a repo generation: resetState bumps a
counter on every switch, refreshStateFiles captures it before its git
work, and onUIThreadUnlessRepoChanged drops the bounce if the generation
has moved on. This one helper is the general mechanism the remaining
scopes' bounces will use too; the same guard covers the rebase-continue
prompt, which reads Model.Files right after.
A generation counter, not a comparison of the *Model pointer: switching
away from and back to a repo reuses that repo's cached state (the same
Model pointer), which a pointer comparison would wrongly accept even
though the in-flight data is stale.
PromptToContinueRebase's Then callback (previous commit) now gets an
explanatory comment, since this is the commit that makes it necessary.
The explicit locking around these writes (RefreshingFilesMutex in
refreshFilesAndSubmodules, FileTreeViewModel.RWMutex around the write in
refreshStateFiles) is left in place for now even though it's becoming
redundant, to keep this commit focused on the bounce itself; it's removed
next.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
PromptToContinueRebase and WithEnsureCommittableFiles both read
Model.Files right after a SYNC FILES refresh. This works today because
the model write currently happens synchronously in the worker before
Refresh's wg.Wait() returns, but an upcoming commit will bounce that
write onto the UI thread instead, at which point wg.Wait() no longer
guarantees it's been applied.
Move both reads into Then ahead of that change. Then is already queued
via OnUIThread (previous commit), so this is a behavior-preserving
refactor on its own: the model is fully written by the time Then runs
either way, whether that write is still synchronous or gets bounced
later.
As part of restructuring WithEnsureCommittableFiles, prepareFilesForCommit
and syncRefresh are inlined into their single call sites.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
This is preparation for upcoming commits that will bounce refresh-scope
model updates (e.g. Model.Files) onto the UI thread by enqueuing the
write via OnUIThread instead of applying it directly on the worker
goroutine. Once that lands, a Then callback that reads the model must
run after that queued write has been processed, not synchronously at
wg.Wait() time — at that point the workers have returned, but a bounce
they queued may not have been processed yet.
Queuing Then via OnUIThread here, ahead of that change, guarantees the
right ordering once it lands: a bounce queued earlier in the same
refresh is already sitting in the channel by the time wg.Wait()
returns, so Then enqueued after it will always be processed after, and
see the post-refresh model.
The signature change to func() error lets Then propagate errors
through gocui's normal error handler (the same path key-handler errors
take).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
GetIsRefreshingFiles() is never called anywhere in the codebase, so the
flag serves no purpose. Remove it from Gui, StateAccessor, and
IStateAccessor, and drop the two SetIsRefreshingFiles calls in
refreshFilesAndSubmodules that maintained it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Pushing a tag triggers no refresh, so it used to redraw the tags view
by hand to remove the "Pushing" inline status. WithInlineStatus now
always re-renders after clearing the operation, so this is redundant.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Operations that show an inline status ("Pushing", "Fast-forwarding",
"Fetching", …) removed it by relying on the async refresh they trigger
to redraw the view after the item operation had been cleared. That
ordering was never guaranteed: the item operation is cleared on the
worker once the operation's function returns, while the refresh redraws
the item from the UI thread whenever its (asynchronous) git work
happens to finish. If the refresh redrew before the clear, the status
was left on screen with no later redraw to remove it, so the branch (or
tag/remote) stayed stuck showing e.g. "Pushing" indefinitely even though
the operation had completed. This is timing-dependent, which is why it
surfaced as rare, hard-to-reproduce reports and as flaky CI failures.
Fix it by re-rendering in stop() right after clearing the operation,
and by making these refreshes synchronous rather than async. Because a
synchronous refresh has already updated the model and queued its own
redraw by the time stop() runs, and UI-thread callbacks run in order,
the redraw we queue here runs last and draws the up-to-date model with
the status removed. An async refresh couldn't give that guarantee: its
model update might not have landed yet, so the redraw could briefly
flash the pre-operation status.
Pull refreshes through the shared CheckMergeOrRebaseAndSelectHeadCommit,
so that helper becomes synchronous too; its only other caller,
RegularMerge, thereby also refreshes synchronously, which is fine: a
synchronous on-worker refresh is what we want anyway.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Resetting to a commit/branch/tag from the reset menu ran inline on the UI
thread with no spinner; a hard reset to a distant commit can take a while
and blocks the UI meanwhile. Run it on a worker with a waiting status. The
undo/redo callers of ResetToRef already wrap it this way.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Setting a single commit to "edit" ran the interactive rebase inline on the
UI thread with no spinner, while its sibling startInteractiveRebaseWithEdit
(used when editing multiple commits or quick-starting a rebase) already runs
on a worker with a waiting status. Make the direct path match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The interactive-rebase item in the rebase-onto-ref menu ran inline on the UI
thread with no spinner, unlike its two siblings in the same menu (simple
rebase and rebase onto base branch), which already run on a worker with a
waiting status. Make it consistent.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The regular and squash merges from the merge menu ran inline on the UI
thread, freezing it with no spinner while git worked. Run them on a worker
with a waiting status, like the rebase entry points already do.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Continuing, skipping, or aborting a merge/rebase from the options menu ran
the git command inline on the UI thread, freezing the UI with no spinner
while it worked (a continue can replay many commits). Run the
non-subprocess path on a worker with a waiting status instead, matching how
the other merge/rebase entry points already behave.
The auto-skip recursion in CheckMergeOrRebaseWithRefreshOptions must not
start its own worker: it already runs on the caller's thread (the worker of
the enclosing waiting status, or the UI thread for the synchronous callers).
Route it through genericMergeCommandImpl with the waiting status suppressed
so its behavior is unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When loading the files of a commit we passed --no-renames, so a rename
showed up as a separate delete and add rather than a single R entry.
That made it impossible to work with a rename that also modifies the
file: the modifications were spread across a full deletion and a full
addition instead of appearing as the handful of lines that actually
changed. The staging view already shows renames and lets you stage
their hunks, so there was no good reason for the patch builder to
differ; the flag was only there because the commit-file parser couldn't
cope with the rename record format.
Switch the commit-file loader and the per-file diff to --find-renames,
teach the parser about the rename record (a status followed by two
paths), and carry the previous path through the patch builder so the
diff for a rename is loaded with both paths, which is what makes git
emit the rename in the first place.
A whole-file selection keeps the rename in the header, so the rename
moves or is discarded together with the file's contents. A partial
selection instead strips the rename metadata and points the header at
the new path, so applying the patch only changes the contents and
leaves the rename in place; the blob index line is kept so that a 3-way
apply can still fall back to a blob merge.
Discarding a renamed file from a commit now discards both the new and
the old path, so the new file is removed and the old one is restored.
Changing the rename similarity threshold refreshes the commit files
panel too, not just the files panel, so that a rename can turn into a
delete and add or back. It is disabled while building a patch, however,
because the patch builder caches each file's diff by path and would
desync if a rename changed into a delete and add underneath it.
Finally, copying a file's diff from the commit files panel now passes
both paths for a rename, so the copied diff shows the rename instead of
a new-file add.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Accordion mode expands the focused side panel, but when that panel has
little content (an empty Files panel, a Branches panel with only master)
it just fills the extra height with blank space. The same waste happens
for any panel that gets more height than it has content to show.
When this option is enabled, each side panel is sized to its own content
(plus a blank line, so it's clear there's nothing more below) rather than
to an equal share of the height. The height a small panel gives up flows
to the panels that have more content than fits; those grow up to their
content and then scroll, weighted toward the focused panel in accordion
mode so the two features compose. Only when every panel fits with room to
spare is the leftover shared out equally, regardless of focus: enlarging
the focused panel there would reveal no more content and would only make
the panels jump around as the focus moves.
The option is independent of expandFocusedSidePanel and off by default.
The status panel, and the stash panel when unfocused, keep their fixed
one-line height as before.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The height thresholds that decide between the proportional layout and
the squashed layout (and, within the squashed layout, between 3-row and
1-row unfocused panels) were hard-coded constants tuned for the fixed
set of five side panels. Now that the panels are configurable, a layout
with fewer panels has less to fit, yet was still forced into the
squashed layout at the same height as five panels would be.
Scale the thresholds down in proportion to the panel count so a smaller
layout keeps using the proportional layout at smaller heights. Only ever
scale down: raising the thresholds for more panels would make them
squash sooner, which works against the reason someone adds panels in the
first place (they want to see them).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A handful of default keybindings differ by platform (e.g. word-wise
cursor movement in text inputs uses alt on macOS but ctrl elsewhere).
Lazygit chooses these based on the OS it runs on, but that's the wrong
signal when the OS isn't where the user is actually typing: someone
running lazygit in a Linux container that they access over ssh from a
Mac gets the Linux bindings, when they'd rather have the Mac ones.
Remapping each binding by hand via config is tedious, so add a single
LAZYGIT_KEYBINDING_PLATFORM override.
An unrecognized value falls back to the real OS rather than to the
non-darwin default bindings, since the latter would be an arbitrary
choice.
Pressing `d` on a worktree only ever removed the worktree, leaving its branch
behind even though deleting it too is often what you want. Turn the confirmation
into a menu: "Remove worktree", "Remove worktree and delete branch", and "Remove
worktree and delete local and remote branch". The branch-deleting items come
after the plain removal (they do more harm if picked by accident); both are
greyed out for a detached-HEAD worktree, and the local-and-remote one is also
greyed when the branch has no upstream. The plain menu pick is the confirmation,
so the standalone "remove worktree?" prompt is gone (and its now-dead
translation string with it); the dirty-worktree force prompt and the
unmerged-branch warning still appear when relevant.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Picking "Delete local and remote branch" for a single branch that's checked
out in another worktree used to fail with "Some of the selected branches are
checked out by other worktrees. Select them one by one to delete them." That
message only makes sense for a multi-selection; for a single branch there's no
reason we can't remove the worktree and delete both the local and remote branch
in one go. Route that case through the same worktree menu as the local-only
delete, with labels that spell out that the remote goes too. The multi-select
error stays for actual multi-selections.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When you delete a local branch that's checked out in another worktree, the
menu offered to remove or detach the worktree but then stopped there, leaving
the branch you asked to delete still around. Now both actions delete the branch
afterwards, and the labels say so ("Remove worktree and delete branch" /
"Detach worktree and delete branch") to avoid surprises.
Also drop the "Switch to worktree" item: switching abandons the delete the user
asked for, and it's already reachable by checking out the branch or via the
worktrees panel. And drop the now-redundant "remove worktree?" confirmation:
the explicit menu pick is the confirmation (the dirty-worktree force prompt and
the unmerged-branch warning still appear when relevant).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Split the actual worktree removal out of the confirmation in Remove into a
non-confirming helper, and give both Remove and Detach an optional `then`
continuation that runs after a successful removal in place of the default
refresh. Upcoming flows need to delete the worktree's branch once the worktree
is out of the way; threading a continuation through (rather than the caller
firing branch deletion independently) keeps it ordered after the git command
that actually frees the branch. No behavior change yet.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Pull the merged-check-and-force-warning step and the actual git deletion
out of ConfirmLocalDelete and ConfirmLocalAndRemoteDelete into helpers, so
that the upcoming worktree-aware delete flows can reuse them instead of
duplicating the logic. No behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lazygit runs git directly rather than through a shell, so a literal "~"
reaches `git worktree add` unexpanded and git creates a directory named
"~" instead of using the home directory.
Expand the tilde ourselves, both for paths typed into the "Other"
location prompt and for the worktree.defaultPath config value.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The command was renamed from "View worktree options" to "New worktree",
but its keybinding config key was still 'worktrees.viewWorktreeOptions'.
That name no longer matches the command, and the 'worktrees' section made
little sense: it held a single binding that isn't even used in the
worktrees panel (that panel uses universal.new), only in the branches,
remotes, tags, commits, and stash panels. Other keybinding sections are
named after the panel they're local to; this one wasn't local to any.
Move it to universal.newWorktree, which describes the action and drops the
spurious section, and migrate existing configs automatically.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
RenameYamlKey can only rename a key in place, under the same parent. To
migrate a keybinding from one section to another we need to relocate the
key to a different parent mapping, which is a move, not a rename.
MoveYamlKey creates intermediate maps at the destination as needed and
prunes any maps left empty behind the key, so a section that held only
the moved key doesn't linger as an empty mapping in the user's config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The old 'n' flow opened a "normal vs detached" menu (the same meaningless
gate the 'w' flow used to have), then asked for a base ref, a path typed from
scratch, and a branch name in three separate prompts.
Replace it with a single picker prompt titled "New worktree for branch",
suggesting local branches not already checked out anywhere, plus remote
branches that don't yet have a local branch of the same name. The entered
value is classified on confirm: an existing local branch checks out into a
new worktree, a remote branch creates a new local tracking branch, and
anything else creates a new branch off the current ref. All three then feed
the same location menu the 'w' flow uses, so paths are chosen from candidates
rather than typed blind. Picking a remote or new branch needs no separate
name prompt — the picker value already is the name. Checked-out branches are
filtered from the suggestions, and a verbatim type-in of one is rejected with
an error.
createWorktree now takes the context to switch focus to once the worktree is
created, so 'n' lands back in the worktrees panel while 'w' still lands in
the branches panel.
This deletes the old NewWorktree / NewWorktreeCheckout core and the now-
orphaned i18n (CreateWorktreeFrom, CreateWorktreeFromDetached, NewWorktreeBase,
NewBranchNameLeaveBlank), completing the migration started for 'w'.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The old flow forced an up-front "normal vs detached" menu (meaningless for
commits, tags and stashes), then asked the user to type a worktree path from
scratch — easy to get wrong, and ambiguous about what relative paths resolve
against. It also offered the same two actions everywhere regardless of what
was selected.
Replace it with per-context "Worktree" menus whose items imply the intent
(new branch + worktree, worktree for an existing branch, detached worktree),
each feeding a shared name -> location -> create pipeline. The location menu
offers candidate parent directories as absolute paths instead of a blank
field, and "Worktree for a branch" is disabled (with a reason) when that
branch is already checked out somewhere, rather than failing after the fact.
Each ref/commit panel binds 'w' in its own controller and calls the matching
typed entry point on the worktree helper, so which menu opens is decided
statically by the call site rather than by dispatching on a ref's dynamic
type. The three commit panels share one menu through BasicCommitsController;
there is no longer a shared worktree-options controller.
The worktrees-panel 'n' flow and its old core (NewWorktree /
NewWorktreeCheckout) are left untouched here so nothing is written and then
rewritten; they migrate, and the dead i18n strings get removed, in a
follow-up commit.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This is the core of "never type a path from scratch": from the repo root,
the configured default path, and the parents of existing worktrees, derive
the ordered list of directories under which a new worktree could be placed.
Pure and unit-tested here; wired into the creation flow in a later commit.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The redesigned worktree-creation flow never asks the user to type a path
from scratch; instead it offers candidate parent directories. Until a repo
has any linked worktrees to learn from, there's nothing to offer, so let
users seed that list with a configured default location.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ConPTY compresses runs of default-colored spaces into ECH + CUF
(\x1b[NX\x1b[NC) instead of emitting them literally. ECH is still a
no-op for us — our buffer is built sequentially and has nothing to
erase — but CUF has to materialize as N visible space cells so the
gap actually appears, otherwise content the child wrote with leading
indentation slides left against the preceding cell.
The view's cursorForward branch reuses the same machinery as tab
expansion: substitute the trigger byte for a space and let the
repeatCount path emit the cells under the parser-tracked SGR. The
existing notifyCellsWritten plumbing then advances screenCol over
the gap, keeping subsequent CUP targets aligned.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY compresses runs of default-colored spaces into ECH + CUF
(\x1b[NX\x1b[NC) rather than emitting them literally. Both currently
fall through the parser's swallow path, so the gap they describe
collapses entirely and content that the child wrote with leading
indentation ends up slid left against the previous cell.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY presents its child's output as a screen buffer and uses CUP /
CUD / CNL / VPA to skip over blank rows rather than emitting LFs. The
previous behaviour swallowed all of those and the visible content
collapsed together. Now the escape parser tracks the screen-relative
cursor row, and any CSI that moves the cursor past the current row
emits a cursorDown instruction that the view turns into the matching
number of empty lines.
Column tracking is deliberately omitted: doing it correctly would mean
duplicating the view's grapheme-cluster width math in the parser, and
ConPTY in practice positions to column 1 after a CR-equivalent, which
the existing wx-reset path already handles. ConPTY-internal scrolling
needs no special handling either: it only emits cursor-positioning
escapes within the first, un-scrolled screenful — once its screen
scrolls it switches to plain linefeeds, which the view advances on
directly regardless of the tracked cursor.
Backward cursor moves are silently dropped — the view's buffer is
append-style and can't undo earlier writes. The exception is cursor-home
(CUP to row 1): ConPTY emits it at the start of every screen, so rather
than drop it we re-anchor the row tracking to the current write position.
Without that, a view not rewound in lockstep with ConPTY's screen (the
command log, which streams pty output without a rewind) accumulates
drift, and every later absolute CUP becomes a dropped backward move that
collapses the rows ConPTY positioned with.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
ConPTY presents its child's stdout as a screen buffer and uses CUP
(`\x1b[<row>;<col>H`) to skip over blank rows rather than emitting LFs
for them. Our escape interpreter swallows CUP via the catch-all
"valid CSI final byte we don't implement" branch, so the blank rows
the child put between non-blank ones disappear and the surrounding
lines collapse together — which is what makes the delta-rendered diff
in the screenshot look like its blank lines and section breaks were
removed.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The per-platform getCmdHandlerPty split existed because the Unix side
had creack/pty and the Windows side had nothing — so it fell back to a
non-pty handler. Now that oscommands.StartPty provides a pty on both
platforms, the two files collapse into one cross-platform
implementation and the stub is gone.
cmdHandler grows a 'wait' field because the pty path on Windows spawns
via CreateProcess and never runs exec.Cmd.Start — so cmd.Wait wouldn't
work there. Non-pty handlers set wait = cmd.Wait; pty handlers set it
to the wait closure StartPty returns.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
