This guards against regressions from the changes that follow. We're
about to add a mechanism that keeps the selection anchored by commit
hash, but we need to make sure that it doesn't take effect here; after a
merge we want to select the newly added merge commit. In the current
state of the code this happens to work because we keep the selection
index the same, which happened to be 0 here; later we will change this
to explicitly select the head commit after the merge.
The wrapper existed to add a git-specific env var to every command. Now
that that's gone, its New/NewShell/Quote methods just delegated to the
inner builder. The only remaining git-specific behavior — the command
runner — is attached in the constructor via CloneWithNewRunner, which
already returns a complete builder, so we can return that directly and
drop the wrapper struct.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
We set GIT_OPTIONAL_LOCKS=0 for every git command we run. That env var
only affects `git status`: it tells git not to take the optional lock it
would otherwise use to write the index back after refreshing the cached
stat information. The intent was to avoid contending for index.lock with
git commands the user runs in a terminal.
The downside is that our `git status` never persists the refreshed
stat-cache. So whenever the working tree's cached stat info goes stale
(e.g. editing files and discarding the changes, or a checkout), every
subsequent status re-hashes the affected files to confirm they're clean,
and stays slow until something else writes the index (such as the user
running `git status` in a terminal).
Fix this by only suppressing optional locks for refreshes that run
unattended in the background; foreground refreshes triggered by a user
action now run a plain `git status` that writes the refreshed index back,
just like the command line does. Background refreshes keep passing
--no-optional-locks so they still can't cause lock contention.
RefreshOptions gains a Background flag that the background routines set,
threaded down to the status command.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a 2-second background poll that calls Status.RefsSnapshot and
compares against the snapshot stored at the end of the last refs-
touching refresh. On a diff, trigger a full refresh — same scope as the
focus-in handler, because once we know something changed externally
we can't be sure what (an agent might have created a worktree or
stashed something alongside the commit we detected).
Refresh runs in SYNC mode because goEvery already serializes iterations
via <-done: a slow refresh delays the next tick naturally instead of
letting work stack. The post-refresh hook from the previous commit
updates the snapshot, so in-app commands don't cause the next poll to
spuriously re-fire.
Disabled in the integration test config, like autoRefresh and autoFetch,
because demo replays make repo changes throughout the run; at 2-second
cadence the resulting full refreshes compete with the demo's own
choreography and push some demos past their 40-second timeout.
Also list the two new config keys in checkForChangedConfigsThatDontAutoReload
so a config edit warns the user that lazygit needs a restart.
Add the storage and snapshot-update half of the external-change-detection
mechanism. RefreshHelper now keeps a mutex-protected snapshot string and exposes
accessors for it; Refresh captures a fresh snapshot at the start of any refresh
whose scope set includes COMMITS or BRANCHES.
We capture before reading the git state, not after. Capturing after would let an
external change that lands between the git state read and the snapshot (say, the
next step of a rebase running in another terminal) leave the stored snapshot
newer than what we actually rendered; the poller would then see no difference
and never refresh again, stranding the UI on the intermediate state. Capturing
first keeps the snapshot from running ahead of the render, so if disk moves
during the refresh the next poll catches it.
No reader of the snapshot exists yet — the polling goroutine that consumes it
comes in a later commit. Keeping the snapshot hook in its own commit isolates
the invariant that the snapshot stays in sync with what the UI has observed,
which is what makes the poller's change-detection predicate work across in-app
commands and focus-in refreshes.
Two settings to control the upcoming background polling mechanism:
- git.autoDetectExternalChanges (default true) is the on/off switch, parallel to
autoFetch/autoRefresh
- refresher.externalChangeCheckInterval (default 2 seconds) is the poll cadence
Disabling is the bool's job, not a magic 0 interval, matching the existing
convention.
Not yet referenced by any code.
A cheap fingerprint of local branches and HEAD that future code can poll to
detect when refs have moved externally.
Branches come from a porcelain for-each-ref. HEAD is read directly from
.git/HEAD: that avoids spawning a child process and captures the symref-or-hash
distinction we need to tell "detached at X" apart from "on a branch pointing at
X" — they share a commit hash, which is exactly the situation at the end of a
rebase when HEAD reattaches to the branch. The reftable backend doesn't keep a
real .git/HEAD (it writes a fixed stub), so when we see that stub or the file is
unreadable we fall back to porcelain commands, which are backend-agnostic.
Uses DontLog so a future polling caller won't spam the command log. Not yet
wired up to any caller.
Several downstream conditions in Refresh() relied on multi-scope predicates to
express "if X is in scope, Y also needs refreshing". This makes it hard to add
new code that needs to ask "does this refresh re-read refs?", because the answer
involves mirroring one of those predicates and keeping them in sync forever.
Expand the co-refreshing relationships once, up front, right after the scope set
is built. The downstream conditions then collapse to single-scope checks against
the (now-expanded) set. Behavior is preserved.
Two of the scattered multi-scope conditions are intentionally left as-is because
they express subsumption rather than co-refresh (one branch already does the
work of another internally — expanding would cause double-refresh), and one
expresses mid-function coupling on a flag set inside the COMMITS/BRANCHES block.
The schema annotated refreshInterval and fetchInterval with minimum=0,
but the background routines reject a value of 0 (they require
interval > 0 and otherwise log it as invalid and disable the feature).
So 0 is not actually a valid value; switch to exclusiveMinimum=0 so the
schema matches what the code accepts.
Several commands (rewording or amending an earlier commit, custom patch
operations, etc.) are implemented by starting an interactive rebase that stops
at a commit, amending it, and continuing. When no conflict occurs, the user
isn't meant to notice a rebase happened at all.
But a background file refresh can fire while the rebase is mid-flight and render
a dirty working copy of whatever the behind-the-scenes rebase is doing (e.g.
applying a custom patch).
To fix this, we pause the background routines for the duration of any
waiting-status operation — exactly the window in which lazygit is driving the
git operation itself and will refresh once at the end. The boundary is also
right for the conflict case: when a rebase stops on a conflict the operation
returns, the pause releases, and background refreshes resume for the interactive
resolution that follows.
Replace the pauseBackgroundRefreshes bool with a count. The single existing
caller (subprocess suspend/resume) is unaffected, but we're about to add a
second, independent reason to pause — lazygit driving a git operation that the
background routines would otherwise catch mid-flight — and the two scopes can
overlap. A bool can't represent "two things both want refreshes paused"; a count
can.
Tools like delta paint each diff line's background with '\x1b[K' so
the color reaches the right edge. Up to now the '\x1b[K' handler
appended (InnerWidth - cx) explicit padding cells with the fill bg
so rendering picked up the color. That worked for short lines but
silently degraded once content exceeded InnerWidth: the repeat
count went non-positive, no cells were added, and after wrapping
the partial tail segment was left without any cells carrying the
fill color, so draw() fell back to the view's default bg.
Record the fill colors on the source line as optional
trailingFillAttributes. In the '\x1b[K' handler set them (and drop
the padding-cell loop — the metadata covers both the wrap and the
non-wrap cases). In draw(), once per source line, pick the trailing
cell's fg/bg from the metadata if present and otherwise from the
view defaults; then the inner-loop fills past-content cells with
that.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The sentinel was appended to every \n-terminated line solely so that
draw()'s prevFgColor tracking would reset to default for the trailing
area; without it, an AttrReverse-styled last cell would carry its
rendered bg past the end of the line.
The same prevFgColor mechanism propagated AttrReverse past content on
*unterminated* lines too — which doesn't match real terminal behavior
(try `print '\x1b[7m\x1b[31mfoo'` in a shell: the reverse stops at
the last character) and isn't relied on by anything in lazygit, since
all our writers terminate lines with \n.
Drop the sentinel cell, drop prevFgColor, and just have draw() paint
trailing cells with the view's default fg/bg. The
TestUnterminatedReverseLineExtendsToEdge regression test inverts to
document the new (terminal-matching) behavior, renamed accordingly.
TestWriteString expectations also drop the trailing "" that came
from the sentinel.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The cells of a source line will soon need to carry metadata about how
the line was terminated (newline vs filled to edge via \x1b[K). Move
to a struct so there's somewhere to put it; this commit only renames
[][]cell to []line{cells: ...} with no behavior change.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The four ReplaceAll(str, "\x00", "") calls (and the equivalent
rune-by-rune skip in linesToString) are leftover from when cell.chr
was a rune and \x00 was used as an internal sentinel. With chr now
being a string and no code path writing \x00, the filtering never
strips anything.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Tools like delta emit each diff line with the bg color set, then
\x1b[K to fill the rest of the row with that bg color. When the
content fits within the view's inner width, gocui's \x1b[K handling
appends explicit padding cells and rendering works. When the content
exceeds the inner width, \x1b[K adds no cells (negative repeat
count), the line is wrapped into multiple segments, and the partial
tail segment's trailing cells fall back to the view default bg
instead of continuing the fill color.
Add a test that drives draw() against a tcell mock terminal and
asserts the current (buggy) trailing background.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The next few commits restructure how the view's draw() decides the
fg/bg of cells past the end of a line's content. Pin down three
existing behaviors first so the restructuring stays a refactor:
- '\n' should reset attributes for the trailing area so a reversed
final cell doesn't bleed into empty space.
- An unterminated line with AttrReverse on its last cell should
propagate that to the right edge (otherwise the rendered bg
abruptly stops at the last character).
- '\x1b[K' on a line that fits within InnerWidth should fill the
remaining cells with the current bg color.
Introduce a small WithSimulationScreen helper that swaps in a tcell
mock terminal so tests can call view.draw() and inspect rendered
cells via Screen.Get().
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
With more than a couple of pagers, having to cycle forward through all
of them to reach the previous one (or to back out of an accidental press
of `|`) is tedious. Add a second binding that cycles backward.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A reverse-cycle handler is about to need the same re-render-and-toast
logic. Pull it out first so the behavior change that follows only has to
swap the cycle direction.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When cycling pagers, "Selected pager 2 of 3" gives no clue which pager
you landed on; with several configured you have to remember the order.
Include the pager's name in the toast instead.
The name is normally derived from the first word of the pager command,
but that isn't always enough: two entries can share a command but differ
in options (e.g. "delta" and "delta --side-by-side"), and an entry may
have no command at all (the default entry, or when using
useExternalDiffGitConfig). So add an optional `name` field that
overrides the derived name.
The message was also hardcoded in English; localize it while we're here.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A pager (GIT_PAGER) formats the diff git produces, while
externalDiffCommand and useExternalDiffGitConfig change how git produces
the diff in the first place. They are different pipeline stages, not
alternatives, so combining them on one entry just pipes one through the
other and produces garbled output (e.g. delta trying to parse
difftastic's side-by-side output as a unified diff). The two external
mechanisms likewise conflict, with the explicit command silently
shadowing the git config one. Treat all three as mutually exclusive and
reject configs that set more than one on the same entry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A submodule that only has dirty or untracked content (no new commit) can't
be staged from the parent repo, but it still shows up as having unstaged
changes. Pressing stage on it therefore briefly flashed as staged and then
reverted, without explaining why nothing was staged.
Detect this case (via `git submodule status`, where a '+' prefix marks a
stageable commit change) in the shared stage/unstage decision: if the only
thing that looks stageable is such a submodule, don't try to stage it.
Instead unstage if there's anything staged to unstage, so the toggle stays
symmetric; otherwise show an error explaining that there's nothing to stage.
Because the decision is shared, this covers both the stage (space) and
stage-all (a) keybindings.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
This map only feeds the optimistic rendering that makes staging feel
instant; it doesn't affect the eventual status, which git reports after
the refresh. The "MM" entry can never be reached for a regular file: a
file at "MM" has stageable unstaged changes, so pressing space stages it
rather than unstaging, and the unstage path is where this map is used. The
only thing that reaches the unstage path at "MM" is a submodule whose
commit is staged on top of dirty content, so this entry exists purely to
update that submodule instantly instead of waiting for the next git
status.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Before the staging decision was unified, the stage (space) and stage-all
(a) keybindings each made their own decision, so a fix to one wouldn't
reach the other. Extend the test to drive the submodule through stage-all
as well, guarding against that asymmetry coming back.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The stage/unstage toggle decides what to do based on whether a node has
unstaged changes: if it does, it stages; otherwise it unstages. For a
submodule this breaks down, because dirty or untracked content inside the
submodule always reports as an unstaged change in the parent repo but can
never be staged from there. Once such a submodule's commit pointer is
staged it sits at "MM", and every subsequent press keeps trying to stage
the unstageable dirty content, so it can never be unstaged.
Treat a submodule's unstaged change as stageable only when its commit
isn't already staged, so that a staged submodule unstages on the next
press regardless of leftover dirty content. Because the decision is now
shared by press and stage-all, this fixes both at once.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
pressWithLock (acting on the selection) and toggleStagedAllWithLock (acting
on the whole tree) each independently decided whether to stage or unstage,
ran the optimistic update, and logged the action. That duplicated decision
has already drifted: the tracked-files filter was added to press months
before it was applied to stage-all, and fixes to one have repeatedly had to
be chased into the other.
Extract that shared decision into toggleStaged, leaving each caller to
supply only the git commands it runs (per-path for the selection, bulk
add -A / reset for the whole tree — the latter is required because the tree
root node has an empty path, so a per-path stage wouldn't work). This is a
pure refactor: the two callers' decisions were already equivalent, so
behavior is unchanged. It exists so the next change to the staging logic
only has to be made once.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a submodule has both a new commit (which the parent repo can stage)
and dirty working-tree content (which it can't), staging it lands on a
"MM" status. Pressing space again should unstage it, but instead it tries
to stage the dirty content over and over, so you can never get back to an
unstaged state.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When a user switches into a repo whose .envrc hasn't been approved with
`direnv allow`, the previous behavior was to drop a "blocked" error
popup and leave the user to fix it externally. That meant opening a
terminal, running `direnv allow`, and then either restarting lazygit or
switching repos and back to refresh the env — easy to get wrong, easy
to forget.
When `direnv export json` exits non-zero, follow up with `direnv status
--json` to ask direnv whether the current directory has a not-yet-
allowed .envrc, and if so, get its path. Then show a confirmation popup
with the .envrc contents inline so the user can read what they're
approving. Confirming runs `direnv allow <path>` and re-runs the load
so the new env reaches subprocesses immediately; cancelling leaves the
env unloaded (the same state as before this commit when direnv refused
to load the .envrc).
Using `direnv status --json` instead of parsing the "is blocked"
stderr line means we rely on direnv's structured output rather than
its human-readable error format, which is more stable across versions
and avoids assumptions about output formatting.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When a user opens a repo from the recent-repos menu or jumps between
worktrees inside lazygit, only the env vars present at process startup
reach subprocesses. That breaks pre-commit hooks and other tools whose
dependencies are pulled in by a per-repo .envrc — users were left with
read-only operations because the env their shell would normally load via
direnv never made it into lazygit's git invocations.
Shell out to `direnv export json` after each chdir and apply the JSON
delta via os.Setenv/Unsetenv. direnv tracks the previous load in its own
DIRENV_DIFF env var, so the delta also unloads vars from the old repo
when entering one without a matching .envrc. If direnv isn't on PATH the
call is a no-op, so users who don't use direnv pay nothing and users who
do need no config to opt in. Any stderr direnv emits (loading messages,
"blocked .envrc" errors, etc.) goes to the command log.
The integration test puts a fake direnv on PATH and asserts that a value
it exports reaches a custom command after switching repos. Wiring this
up needed runner.go to support `{{actualPath}}` placeholders in
ExtraEnvVars, mirroring the existing support for ExtraCmdArgs, so the
test can prepend a fixture-relative directory to PATH.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
If we return the error here, we don't switch repos, but the chdir
happened already, so this would be an inconsistent state (a lot of
lazygit's code assumes that the current directory is always the worktree
root). Only log the error; failing to record the current directory is
not the end of the world.
Also, it is very unlikely to happen; RecordCurrentDirectory only writes
to a small file, and if this fails, then either there is filesystem
corruption of the disk is full, and in both cases the user likely has
much bigger problems.
Commit 4f0393f97b caused a regression: for operations that use
WithWaitingStatusSync (examples are squashing fixups, moving commits up or down,
cherry-picking, creating fixup commits, and more), the waiting status wouldn't
show during the operation; however, it would show after the operation was done,
and then linger forever.
The cause: since 4f0393f97b, layout sizes the bottom line from the actual
content of the AppStatus view rather than from the status manager. The async
render path keeps the view in sync (it sets the buffer on the first tick and
clears it to "" when the status ends), but the sync path used by
WithWaitingStatusSync did not:
- It called ForceLayoutAndRedraw before writing anything to the view, so layout
saw an empty buffer and left no room; the status never appeared during the
operation.
- When the operation finished it just broke out of the loop, leaving the last
spinner frame in the buffer. Every subsequent layout kept reserving room for
that stale content, so the status stuck around forever.
Fix this by writing the status into the view before the initial layout, and
clearing it again when stopping.
This doesn't make a difference for the behavior, it just looks strange to
include the empty bindings first and then filter them out in the next statement.
If a keybinding that we want to display in the options bar was set to <disabled>
by the user, in pre-0.62 versions we would still display the command, but with
no keybinding. This was arguably not very useful before, but now it actually
crashes because we would now try to display the first key of the slice of
configured keys (crash introduced in 3d18ee8f91). Fix the crash by not showing
those commands at all.
Ctrl+s used to be a separate binding confirmInEditor-alt, but now that it was
folded into the main confirmInEditor, we need to mention both bindings here.
Also use the new syntax while we're at it.
git-flow-next (https://github.com/gittower/git-flow-next) uses a
different config schema than legacy git-flow:
gitflow.branch.<type>.prefix instead of gitflow.prefix.<type>.
Recognize both schemas in GetGitFlowPrefixMap by querying each and
merging into a single prefix → branchType map. GitFlowEnabled now
consults the merged map so a next-only setup counts as enabled.
When both schemas configure the same prefix, the legacy entry wins.
In normal usage both schemas agree, so the rule mainly matters as a
deterministic tie-breaker.
Lift the inline parsing in FinishCmdObj into parseGitFlowPrefixMap on
ConfigCommands. The caller now does a direct map lookup against the
parsed prefix → branchType map instead of iterating the raw config
output and suffix-matching. This is preparation for adding git-flow-next
support, which needs to merge a second config schema into the same map.
One incidental change: a branch name without a slash now returns
NotAGitFlowBranch immediately, rather than falling through the
line loop with an empty suffix. Previously a configured
gitflow.prefix.X whose value happened to equal the entire branch
name could match — never a useful outcome.
The previous logic only re-rendered the main view when the side panel itself was
focused. When the user pressed `0` to focus the main view, the
Normal/NormalSecondary context becomes Current and the equality check failed, so
cycling pagers had no visible effect. Mirror the pattern from postRefreshUpdate:
when the main view is focused, call HandleRenderToMain on the side panel below
it on the stack (which CurrentSide already returns).
Convert the remaining *Alt/*Alt[12] sibling fields (PrevItem/NextItem,
GotoTop/GotoBottom, PrevBlock/NextBlock, ScrollUpMain/ScrollDownMain,
OptionMenu, ConfirmInEditor, DiffingMenu) so the merge mechanism folds
their values into the corresponding main multi-key binding at config
load. The redundant alt-only Binding registrations across the various
controllers and the global keybindings file are gone: the merged main
field already carries every key, so the for-loop in SetKeybinding
registers them all.
Previously the patch_explorer and merge_conflicts controllers reused
Universal.PrevBlock/NextBlock for moving between hunks (or conflicts) in the
main view, sharing keys with the global side-window cycle. The two operations
are conceptually distinct: cycling side windows is a global navigation gesture,
while next/prev hunk acts on the diff in the main view. Tying them together also
blocks adding <tab>/<backtab> as side- window-cycle keys, because <tab> already
means "toggle panel" in the staging view.
Add Main.PrevHunk/NextHunk to the existing KeybindingMainConfig (which already
groups bindings for the main view across staging, patch building, and merge
conflicts) and switch both controllers to it. The defaults match the active key
set those controllers had before (<left>/<right>/h/l), so the user-visible
behavior is unchanged.
Now that quit accepts multiple keys, the historical quit-alt1 field is
redundant: existing configs that set it should keep working without the user
having to migrate, but the lazygit code shouldn't have to register the alt
binding separately.
Add a merge step that runs after the user config is loaded (and from
NewDummyAppConfig, which the cheatsheet generator and integration tests go
through) folding the alt value into the main key list. Mark QuitAlt1 deprecated
so it disappears from the generated Config.md example, while staying in the JSON
schema with a description so editors can still steer users toward the new form.
Note that instead of marking the alt config as deprecated, we could have added a
migrator that changes users' config files and gets rid of the alt config for
good. I decided not to do that, because this would render the config file
invalid for older versions of lazygit, which would then refuse to start; and
that's annoying when bisecting bugs. We'll keep the deprecated configs in the
code for a year or so, and then add the migrator.
The next commit will fold the remaining ~15 -alt-style fields the same way; the
helper is shaped to keep that mechanical.
CustomCommand.Key and CustomCommandMenuOption.Key are user-configured
keybindings just like the built-in ones. Converting them to the Keybinding type
lets a user assign multiple keys to the same custom command, e.g. `key: [a, b]`,
the same way they would for any other keybinding.
The validator iterates over the elements rather than checking a single string,
the binding registration goes through GetValidatedKeyBindingKeys to register
every alternate, and the existing error messages use .String() so a multi-key
binding renders sensibly.
CustomCommandPrompt.Key (a form field name, not a keybinding) stays a plain
string.
JumpToBlock is special: each of its 5 elements is the binding for one side
window (status / files / branches / commits / stash), not an alternate for a
single command. Change the field from []string to []Keybinding so each window
slot can have alternates of its own.
The schema becomes "an array of 5 keybindings, each itself a string or array of
strings", which falls out cleanly from how the Keybinding type inlines into the
generated schema. Existing configs (a flat array of 5 strings) keep validating
because each element is unmarshalled through Keybinding's scalar-or-sequence
decoder.
Until now every keybinding config field was a plain string. That meant a user
couldn't ask for two keys to invoke a command — the config silently accepted
only one form.
Convert every string-typed field across all 13 KeybindingXxxConfig structs to
Keybinding so the union type extends to every command. Defaults wrap their
single-key value in Keybinding{...} so the generated Config.md still renders one
scalar key per binding.
The alt fields keep their separate Binding registrations for now: this commit
does not yet introduce the merge mechanism that folds them into the main field —
that comes in a follow-up. Consumers previously calling opts.GetKeys on a string
field now call opts.GetKeys on the Keybinding, or take .String() / Keys[0] where
a single value is needed.
Adds a Keybinding.String helper for rendering, schema-generator work that
inlines the Keybinding union into each consuming property, and a unit test
covering the user-facing scalar/sequence YAML forms for quit.
Each user-configurable keybinding is currently a single string in the YAML
config. To let users assign alternate keys to a command, introduce a Keybinding
type that decodes from either a scalar (the existing single-key form, kept for
backward compatibility and for a simpler config file) or a sequence of strings.
Marshalling collapses single-element slices back to a scalar so configs and
generated docs round-trip cleanly.
JSONSchema describes the type as a oneOf union so editors validate either form;
subsequent commits will inline the union into the generated schema and start
using Keybinding as the field type.
The cheatsheet has been showing only the first key of each binding
since Binding.Key became Binding.Keys; collapse the list back into a
single comma-separated cell so users can see all the alternates at a
glance once bindings start carrying more than one key.
This is a pure refactor in preparation for letting users configure multiple
alternate bindings for a single command. Every Binding still has exactly one
key, so nothing changes visibly: the cheatsheet, the on-screen options bar,
and the keybindings menu all render identically.
When a Binding ends up with multiple keys, the on-screen options bar will
show only the first (to avoid clutter); the cheatsheet will show all of them (in
a later commit). For now both paths take Key[0].
MenuItem.Key is changed in the same way, it also has a slice of keys now.
In this commit we keep the name `Key` in Binding, KeybindingOpts and MenuItem,
instead of renaming them to `Keys` right away, in order to keep the diff a bit
more readable. We'll do the rename separately in the next commit.
Constructing a menu item key from a literal character requires
gocui.NewKeyRune('r'), which is a bit noisy. Add a private menuKey helper in
both the controllers and helpers packages so the common case in either reads as
menuKey('r'). Duplicating the one-liner is cheaper than a cross-package import
dependency and avoids forcing every controller file to qualify the call.
The reason for doing this now is that we are going to change MenuItem.Key to a
slice of keys later in the branch, which means we'd have to add `[]gocui.Key{`
at each call site, making them even more noisy. With the menuKey helper we can
just change its signature and leave all clients unchanged.
For legacy reasons, OptionMenu was set to `<disabled>`, and OptionMenuAlt1 to
`?`. This doesn't make a lot of sense any more; get rid of OptionMenuAlt1 and
bind OptionMenu to `?` by default. This is a breaking change for users who
rebound OptionMenuAlt1 in their config, but it doesn't strike me as very likely,
and it's easy enough to fix.
Shell.RunShellCommand was passing os.Environ() to its child, while its
sibling runCommandWithOutputAndEnv has used the minimal
NewTestEnvironment since late 2023 when env isolation was introduced;
the sh path was just missed.
This matters when integration tests run from inside a `git rebase -x`
exec in a linked worktree: git sets GIT_DIR=<main>/.git/worktrees/<name>
for the exec, and it leaks all the way down through bash, just, go test,
and the test process, into every git invocation RunShellCommand spawns.
cmd.Dir becomes irrelevant — git resolves GIT_DIR over cwd-based
discovery, with the work-tree taken from the gitdir file (i.e. the
worktree root). So `git checkout -b conflict` in a test fixture creates
the branch on the real worktree and switches its HEAD, hijacking the
in-progress rebase and trashing the working tree. (In the main worktree
git doesn't set GIT_DIR for rebase exec, which is why the bug was only
visible from linked worktrees.)
Using self.env also incidentally restores GIT_CONFIG_GLOBAL for shell
commands, so commits made via RunShellCommand are now authored by the
test config's CI identity rather than whatever the host's ~/.gitconfig
resolves to.
AutoForwardBranches relies on the worktree model to skip any branch
that's currently checked out in another worktree (so we don't update
its ref behind the worktree's back). The post-fetch refresh wasn't
including the worktrees scope, so any external change to the worktree
list between lazygit's startup and the fetch — a `git worktree add`,
a `git checkout` in a linked worktree, a branch rename — left the
in-memory model stale and the skip check returned false negatives.
Add WORKTREES to the post-fetch refresh scope when auto-forwarding is
enabled. We gate on the config so users with auto-forward disabled
don't pay for an extra `git worktree list` plus per-worktree rev-parse
on every fetch tick.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When the linked worktree's branch is changed externally — by another
shell, by another tool, or by git running outside lazygit — lazygit's
worktrees model goes stale. The next post-fetch auto-forward then
doesn't realise the branch is now checked out elsewhere, and advances
its ref behind the worktree's back. The worktree's HEAD then resolves
to a commit its index/working tree haven't been updated to, and the
user sees that diff as the inverse of what was fetched — files
appearing as pending changes that they didn't make.
The test sets up a linked worktree initially on a side branch, then
externally checks out master in it before pressing fetch. Two
EXPECTED/ACTUAL pairs capture the symptoms: the branches view shows
master as `✓` rather than `↓1`, and switching to the linked worktree
shows master's would-be incoming file as a pending deletion against
HEAD.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The post-fetch logic was duplicated in `backgroundFetch` and the manual
fetch handler: refresh a fixed set of views, then auto-forward branches
if the fetch succeeded. The two had already drifted on the refresh
scope; folding them into a single helper makes the duplication go
away and prevents it from drifting again.
Pass the fetch error through so we preserve the previous behaviour of
refreshing unconditionally but only auto-forwarding on success.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The background fetch path already includes PULL_REQUESTS in its
post-fetch refresh scope, but the manual fetch from the files view
doesn't. As far as I can tell that's an oversight from when
PULL_REQUESTS was added — there's no reason the two paths should
differ. Align them so both refresh PRs after fetching.
This also sets up the next commit to extract a shared helper for
the post-fetch refresh.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
If `git worktree list` fails, we want the Worktrees model to fall back
to an empty slice so callers iterating over it stay correct. The error
branch was setting it to `[]`, but the line below unconditionally
overwrote it with the nil `worktrees` value from the failed call.
Use an else branch so the empty-slice fallback actually sticks.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Compile them only once at startup. I didn't measure if this makes a difference,
but it's easy to do, and now that we potentially need to check them more often,
it might be worth it.
The branches-panel PR icons only worked for github.com remotes. There was no
fundamental reason — the auth library we already vendor (cli/go-gh) supports
enterprise tokens out of the box (GH_ENTERPRISE_TOKEN, gh auth's keyring),
and the user-facing 'services' config has long been the documented way to
tell lazygit "this domain is a github service" for the View-PR-URL feature.
The fetcher just hardcoded github.com in three places:
- a substring check on the remote URL to decide we're "in a github repo",
- the GraphQL endpoint (always api.github.com/graphql), and
- the auth lookup (always against the default host).
Plumb the resolved web domain through instead. Detection now goes through
the hosting_service ("is this remote's provider 'github'?"), which means a
user with services: { 'git.acme.com': 'github:git.acme.com' } configured
gets PR icons on their GHE remotes too.
Replacing the substring check with a provider check also tightens a latent
bug in getGithubRemotes: it previously accepted any remote whose URL parsed
with the default regex, including gitlab and bitbucket — masked today only
by the InGithubRepo gate, but exposed once the gate goes away.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The github pull-request fetcher needs to know whether a given remote is a
github-type service, which host its API lives on, and which owner/repo to
query against. Today the fetcher hardcodes the first two ("does the URL
contain github.com" and "https://api.github.com/graphql") and re-derives
owner/repo from the remote, which precludes GitHub Enterprise and makes
the fetch entry point take more arguments than it needs.
Add an accessor on the hosting service manager that exposes the already-
resolved service domain together with the parsed owner/repo, so callers
can answer all of these questions without reaching into the manager's
internals.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
After a successful paste DidPaste is true, hiding the "X commits copied"
indicator but leaving the buffer populated. From the user's perspective
this looks like a clean slate, so a new shift+C should start fresh. It is
important to reset DidPaste first, before populating the buffer with the new
commits, because otherwise each loop iteration would overwrite the previous one
since Add() rebuilds the set via SelectedHashSet() which returns empty while
DidPaste is set.
After a successful paste, the "X commits copied" indicator hides and
DidPaste is set, but the buffer is not cleared. If the user then
range-selects multiple commits and presses shift+C, every Add() call
rebuilds the set via SelectedHashSet(), which returns empty while
DidPaste is true; each iteration of the copy loop therefore overwrites
the previous one and only the last commit in the range survives.
Now that HandleRender no longer does an implicit Render(), we can use it inside
OnUIThreadContentOnly to save performance, on the assumption that rerendering a
view that contains an inline spinner never changes the layout.
self.c.Render() at the end of HandleRender was there to schedule a gocui Update
tick so the view content modified above would actually get drawn. For UI-thread
callers (the great majority -- keybinding handlers, the layout function itself,
popup resize, etc.) this was unnecessary work, since gocui already runs a
layout/redraw cycle after every event. SimpleContext.HandleRender doesn't call
Render() either, so this aligns the two implementations.
The few callers that drove HandleRender from a worker goroutine and relied on
Render() for the flush were wrapped in OnUIThread in the preceding commits, so
the implicit Render is no longer needed.
Also, Render() being called *before* setFooter() looks like it might have been a
theoretical race; this is no longer an issue now.
The redraw of the selection color (using <space>) would be tied to the
spinner drawing. To reproduce, having a high spinner refresh rate and
toggling a file would see a delay equivalent to the time spinner refresh
rate.
SetSuggestions has two callers: prepareConfirmationPanel calls it directly on
the UI thread, while editors.promptEditor and
SuggestionsContext.RefreshSuggestions call it via AsyncHandler, which runs the
result closure on a worker goroutine. The worker path currently relies on
HandleRender's self.c.Render() to flush the view update. Wrap the body in
OnUIThread so the worker path stays correct when Render() is removed; for the
UI-thread caller the extra bounce is harmless.
refreshBranches runs on a worker goroutine and re-renders the commits view
directly to refresh the branch-head visualization. As with refreshView, this
currently only flushes because HandleRender ends with self.c.Render(). Wrap the
explicit HandleRender call (along with the LocalCommitsMutex pair around it) in
OnUIThread so it keeps working once Render() is removed.
An async refresh dispatches refreshXyz on a worker goroutine, which then calls
refreshView -> PostRefreshUpdate -> HandleRender. Today the final
self.c.Render() inside ListContextTrait.HandleRender is what triggers a UI flush
from the worker. We're going to remove that Render() call, so prepare by
wrapping refreshView's body in OnUIThread.
This moves the entire rendering of the view (and the ReApplyFilter/ReApplySearch
stuff) to the UI thread, not just the layout. I don't expect this to make a
difference in practice, and it is already one step towards my long-term goal of
moving all view rendering to the UI thread (see
https://github.com/jesseduffield/lazygit/issues/2974#issuecomment-1729154768).
Unrelated to this branch, just because we're touching this code: there's little
reason to set the color on the background thread but the text on the UI thread.
Set them both together on the UI thread. Avoids a data race (unlikely to be a
problem in practice, we're talking about a 64-bit int, but still).
In 0d195077e4 we improved the performance of the status bar spinner by
avoiding a layout. This is fine from one spinner tick to the next, but it's a
problem when spinning starts or ends (or in the hypothetical case that the
status text changes in the middle of the operation, which we never do in
lazygit, but theoretically could). In this case a layout is needed so that the
rest of the status bar gets pushed over appropriately (or moves back to the left
when the spinner ends), and also so that the bottom line is shown or hidden
properly for users who set gui.showBottomLine to false.
To fix this, keep track of the status string width and force a layout whenever
it changes. This includes the beginning and end of an operation when it changes
from empty to non-empty or vice versa.
There is currently no observable misbehavior from this bug, but that's only
because we must have a HandleRender call somewhere that forces a full layout
when an operation starts or ends. We will remove the Render() call from
HandleRender at the end of this branch, at which point the misbehavior would be
visible if we didn't fix it here.
This prevents views from drawing over higher z-order views.
Currently this is not an issue in practice, because we use
ForceFlushViewsContentOnly only for the bottom line status spinner, and there
are never views on top of it. However, later in the branch we will use the
mechanism to redraw the inline spinners in panels (e.g. the "Pushing..." status
next to a branch name), and there could be a popup on top of it.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
With a very slow spinner rate (seconds), you can see that at the beginning of an
operation the bottom line leaves a gap for where the status will go, but the
status (and spinner) is only drawn the first time the spinner ticks. The reason
is that layout looks at GetStatusString to decide how much room to leave, rather
than at the actual content of the AppStatus view; the view content is only set
by renderAppStatus the first time the spinner ticks.
Fix this by making layout look at the actual content of the view so that the
layout is in sync with what is drawn. This also avoids flicker if an operation
is so fast that it finishes before the spinner ticks for the first time,
especially for users who set gui.showBottomLine to false.
This didn't cause a bug so far because switching repos always happens from
within an OnWaitingStatus, so the spinner would take care of calling layout and
draw. However, later in this branch we are going to optimize the spinner so that
it no longer calls layout, at which point this would break, so make sure we
rerender at the point where it's needed.
Modifiers were moved into Key in 22169e22f, but the separate Modifier field
on types.Binding and gocui.keybinding was left behind. The keypress matcher
already compares modifiers via Key.Equals, so the old field is never read on
the dispatch path; it just got passed through SetKeybinding and stored.
Drop it from gocui.keybinding, types.Binding, and the SetKeybinding /
DeleteKeybinding signatures, and remove every now-redundant Modifier:
gocui.ModNone struct field. Mouse bindings keep their own Modifier (on
ViewMouseBinding) since that path still consults it.
I noticed that it compares key.keyName and key.str separately instead of calling
key.Equals, but instead of deciding whether that's a problem, just delete the
function when nobody needs it.
While I strongly prefer the alt-arrow bindings myself, I'm worried that existing
users might not be happy about the change, so I'm reverting it.
I'm working on supporting multiple keybindings for every command, so once that's
in, we can change the default to include both.
The commit graph used '⏣' (U+23E3 BENZENE RING WITH CIRCLE) for merge
commits and '◯' (U+25EF LARGE CIRCLE) for regular commits. Both have
very poor coverage in popular monospace fonts:
- '⏣' lives in the Misc Technical block and is essentially absent from
every common monospace font (Source Code Pro, JetBrains Mono, Fira
Code, Cascadia Code, Hack, Iosevka, Menlo, Consolas, Monaco, IBM
Plex Mono, Ubuntu Mono, Noto Sans Mono, Inconsolata). It is always
drawn from a system fallback font.
- '◯' is the late-addition LARGE CIRCLE codepoint. It is present in
some fonts (Cascadia, Fira Code, Hack, Iosevka, Menlo, Noto Sans
Mono) but missing from many others, including Source Code Pro and
most Nerd Font derivatives based on it.
This is why the graph renders inconsistently across platforms even
when the same monospace font is configured: each OS picks a different
fallback font (Apple Symbols on macOS, Segoe UI Symbol on Windows,
Noto/DejaVu/Symbola on Linux), and the substituted glyphs differ in
shape, weight, and advance width. '◯' is also East Asian Ambiguous
width, so some terminals render it wider than one cell, exaggerating
the misalignment.
Replace the symbols with codepoints from the foundational 1991
Geometric Shapes block, which has far broader font coverage:
- Merge: '◎' U+25CE BULLSEYE -- concentric circles, the visually
closest cousin to the previous benzene-ring glyph.
- Commit: '○' U+25CB WHITE CIRCLE -- the same hollow-circle silhouette
as before, just a more universally available codepoint.
The new symbols are present in the font directly in significantly
more cases; and when fallback is still required, they are universally
well-drawn (unlike '⏣', which many fallback fonts also lack).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Windows cannot remove files while handles are still open. In
TestOSCommandFileType we created files and immediately called RemoveAll without
closing handles, which left untracked artifacts (e.g. "testFile" and "file with
spaces") in the working tree. Close the handles and assert RemoveAll succeeds so
cleanup failures are visible.
The call was meant to guarantee a UTC time zone to make the tests deterministic,
but as the previous commit explained, this only worked on Mac and Linux, not on
Windows. Since we now have a better fix, this workaround is no longer needed.
The "custom time format" test case of TestGetCommitListDisplayStrings failed on
Windows. Root cause: UnixToDateSmart used time.Unix(timestamp, 0), which formats
in process-local time. In tests we pass an explicit 'now' (often UTC), but the
timestamp was rendered in Local, causing one-hour drift on non-UTC machines.
The test tried to work around this by doing os.Setenv("TZ", "UTC"); however,
this only worked on Mac and Linux. On Windows, it has no effect because Windows
uses registry-based timezone configuration, not TZ environment variables.
Change: convert the timestamp into now.Location() before both the same-day
comparison and formatting.
Why this is safe: callers already define the presentation timezone via the 'now'
argument (typically time.Now() in app code, controlled time in tests). This
aligns timestamp rendering with that caller intent and removes dependence on
global TZ state or OS-specific environment variable behavior.
Added regression tests for UTC and UTC+1 to ensure deterministic behavior across
all platforms.
These have alternate keys (<ctrl+h> for backspace, and <ctrl+f> for
move-cursor-right). Both of these broke with commit 22169e22ffc46c5; the first
because it was accidentally omitted, the second because of a stupid copy/paste
mistake.
This changes not only how we store modifiers (inside of Key instead of passing
it separately), but also how we parse keybinding strings: it supports all
combinations of modifiers now (if the terminal supports it, that is).
An uppercase letter is not valid with ctrl, and only works because we lowercase
the string before parsing it. This will change later in this branch when we
start supporting bindings like <c-s-r>.
This bundles the keyName and a rune, so that we don't have to pass these around
separately everywhere. This should make it easier to swap out the rune for a
string when we upgrade to tcell v3.
I copied all files except dot files (.github and .gitignore), the _examples
folder, and go.mod/go.sum.
At some point we may want to copy the files back to the gocui repo when other
clients (e.g. lazydocker) want to use the newer versions of them.
This is so that they look the same no matter what color palette the terminal is
using. (One user complained that the text for the Open state is barely readable,
because they are using a palette that has a very pale green.)
GitHub uses slightly different colors depending on light vs. dark mode;
fortunately they are very close, so hopefully we can ignore this. I picked the
ones for dark mode here, on the assumption that this is more common.
Also, not all terminals support true hex colors; for example, Terminal.app on
macOS doesn't, so it maps the colors to the closest ones in the Xterm-256
palette. This shouldn't be a huge problem, but for some reason it displays draft
PRs as something closer to Cyan than grey, and I don't understand why.
If the repo has multiple remotes, but only one of them is on Github (the others
might for example point to a self-hosted Critic server or something like that),
lazygit would still present a menu to choose the remote for pull requests, but
it would contain only that single entry. That's pointless, pick it automatically
without prompting.
We add some tests while we're at it; these wouldn't have caught the problem,
because they only test getGithubBaseRemote which already takes the filtered
github remotes. It's still better than not having any tests; the real issue
could only have been caught with an integration test, which we don't bother
adding.
If we used to have a base remote (e.g. because there was only one), but now we
don't (e.g. because the user has added a second one, and we don't know yet which
one is the base), stop showing the cached PRs. This is especially important in
the case that the user cancels the prompt, in which case we don't have a base
remote for the rest of the session, but would keep showing the (potentially
stale) cached PRs forever.
This is useful when cancelling out of the commit panel mid-sentence (after
having typed the space for the next word); when entering the commit message
panel again, the space was gone and you had to type it again. Small thing, but
it just seems better to resume the panel in exactly the state that you left it
in. (Which we actually don't do; we don't remember the cursor position, or which
of the subject/description panels was active. That would be a separate
improvement.)
The save path and the load path used to be asymmetric. On save, the textarea
getters applied strings.TrimSpace, which stripped any leading blank lines, a
trailing newline after the cursor, or indentation on the very first line of the
description — all of which are legitimate user content. On load,
SplitCommitMessageAndDescription did TrimSpace on the description as well, and
the preserved message was routed through that same git-format split because
HandleCommitPress passed it as OpenCommitMessagePanel's InitialMessage. The
result: every round-trip through "escape and reopen" silently mutated the
message.
The fix is to treat our own preservation file as its own format, distinct from
git's canonical "summary\n\nbody" format:
- The textarea getters return raw content. strings.TrimSpace moves to the one
place that still needs it: the empty-summary check in HandleCommitConfirm (git
itself strips trailing whitespace and blank lines, so no pre-trim is needed
before -m).
- SplitPreservedCommitMessage / SetPreservedMessageInView split on the single
"\n" our Join uses, without any trimming — truly lossless.
- SplitCommitMessageAndDescription keeps its git-format behavior but replaces
TrimSpace with TrimPrefix("\n"), so it strips only the blank-line separator
and leaves body indentation intact.
- HandleCommitPress now mirrors HandleWIPCommitPress: it no longer passes the
preserved message as InitialMessage. OpenCommitMessagePanel resolves the
preserved content itself, uses it for display via the preservation-format
setter, and stores it as the initial message so the close-time "did the user
change anything?" check still correctly detects a cleared panel.
- GetInitialMessage no longer trims. With raw getters on both sides of the
comparison, trimming here caused spurious non-matches (e.g. for preserved
content with trailing whitespace). The original motivation — matching a
"WIP: " prefix with trailing space — works unchanged.
- UpdateCommitPanelView becomes dead code and is removed; its one remaining
caller (history cycling, always git-format) goes directly through
SetMessageAndDescriptionInView.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Callers currently hand this function a trimmed description, so the output is
always clean. An upcoming change to the commit-panel getters will stop trimming
at the callsite (so that whitespace typed by the user round-trips through the
preservation file exactly), at which point the description can end with one or
more newlines. Without this change, a user who presses Enter after their
description body and then invokes "Add co-author" would end up with two blank
lines between the body and the trailer instead of the expected one.
This isn't possible with the default quit binding ('q'), but there's an
alternative binding (ctrl-c) that does work while the panel is open; also, users
can rebind quit to something like ctrl-q.
We'll want to call just the preservation step when the app is quitting
with the commit message panel open: at that point the view-hiding and
context-popping in CloseCommitMessagePanel are pointless (the app is
about to exit), and some of the focus-lost side effects could be
surprising during teardown.
There's no reason for this; when opening the panel next time, it will be
populated again. Also, it doesn't make sense to do this only when not preserving
the message.
Extends the existing retry logic to handle transient lock-related errors beyond just .git/index.lock. This now also retries when encountering "cannot lock ref" or "cannot update ref" errors, which can occur intermittently during fetch/pull operations in large repositories.
Related to #5124
Signed-off-by: majiayu000 <1835304752@qq.com>
Change the tests so that they run in a linked worktree; this uncovers the bug
that copying a file's absolute path uses the main repo path rather than the
worktree's path.
When no base repository is configured using gh, we have several heuristics for
choosing a likely base repo before prompting the user. One of these was that if
the origin remote exists, we'd choose that. This may be the right choice in some
cases, but in many others it's not; for example, in the common scenario of a
forking setup where the upstream repo's remote is called after its owner, and
the fork remote is called origin, we would choose origin as the base repo, which
results in not showing any PRs. Don't do that, and instead prompt the user for
the base repo in this case.
The assumption is that if a pull request exists on a main branch, it was usually
created by mistake and then closed, and showing it serves no purpose and is only
distracting.
We keep showing open pull requests for main branches though, because this allows
you to notice that there is one that you probably want to close.
This only affects the display (in the branches list and in the main view);
opening the PR in the browser using shift-G is still possible, as is copying its
URL to the clipboard.
Normalizes the repository owner to lowercase during the PR
mapping.
This ensures that PR icons and integration features work correctly even
when the local git remote URL casing differs from the official
repository casing on GitHub.
When building multi-step custom command forms, some prompts are only
relevant depending on earlier answers. Without conditional logic,
users must dismiss irrelevant prompts manually.
Prompts now accept a `condition` field with a template expression
evaluated against prior form values. Skipped prompts default to
an empty string.
The template expression is a string pre- and suffixed with double curly
braces - {{}}.
Form keys can be reused, a guard ensures that skipped prompts do not
reset already set form keys with an empty string. This allows the
conditional flow to remind a user to set a key that was left empty
because additional conditions want that key to be set. This removes the
need to have additional if checks in the command that uses the form
keys.
This makes it easier to recover them if they were deleted accidentally.
We only do this for local branches for now, we don't bother for remote branches;
it would be trickier there, because the branch on the server might not actually
point to the same hash as our local remote tracking branch does.
For esthetic reasons, checking out a branch (or other ref) blocks the UI until
the refresh is done, so it's important that the refresh doesn't do unnecessary
work. Refreshing pull requests is unnecessary (but costly, when waiting for it)
when a branch is checked out that already existed locally. However, it is
required when checking out a remote branch for the first time, so that the PR
icon appears immediately when there is one.
For the branches panel we might consider unifying it with the existing `o`
command for creating a PR: it could check if there is a PR already, and open it
if so, or create a new one if not.
However, I also want the command in the local commits panel for the checked out
branch, and there's no existing "Create PR" command there; and the `o` command
opens the selected commit in the browser, so it's unrelated.
Add GitHubCommands struct with GraphQL-based PR fetching, and
GithubPullRequest model. Wire HostingService and GitHub command
structs into GitCommand.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
Extract parseRemoteUrl helper to avoid duplication between
getRepoURLFromRemoteURL and new getRepoNameFromRemoteURL.
Add repoNameTemplate to ServiceDefinition and GetRepoName() to
HostingServiceMgr. Add GetRepoInfoFromURL for callers that need
owner/repo without a full service lookup.
The only information that this carries is whether an entry is a real branch or a
detached head. Detached heads can only be at the top, and they are easy to tell
apart from the other branches by their name, so the icon is not really very
useful.
We are going to show PR icons in this column.
Not a terribly important feature for users, probably, but it is useful for
developers when testing a new feature with or without nerd fonts; and it does go
against or policy of all configs being hot-reloadable.
Note that switching from nerd fonts version 2 to 3 is *not* supported without
restarting, but I find this less important.
Set the sort order's default from the former foldersFirst to mixed, so this is a
change in behavior. I find this useful because it now matches git's order, so if
you look at the diff of a commit, the TOC at the top has the same order as the
file tree you see when entering the commit.
When you rebase a branch and there are conflicts, lazygit asks you to continue
the rebase when it detects that all conflicts have been resolved. However, it is
common to make additional changes beyond just fixing the conflicts (e.g. to fix
build failures), and when doing that while the "Continue the rebase?" prompt is
showing, lazygit detects that too and asks you if you want to stage those newly
modified files too. This is all well and good (and can be disabled for those who
don't like it); however, lazygit would treat out-of-date submodules as unstaged
changes and would offer to stage those as well, and this is pretty bad and
almost never what you want. Fix this by excluding submodules from that second
check.
Previously, when showing subcommits of a branch or tag, scrolling down, and then
going out and entering subcommits again, it would select the first commit but
keep the previous scroll position, so that the selection was not visible. Always
scroll to the top to fix this.
This is probably the less severe case, but it could still be an issue for people
who have many modified top-level files they want to discard, and have
showRootItemInFileTree set to false; they could select all those files by
pressing 'v' and '>'.
Previously it would iterate over all changed files and call git checkout or git
reset for each one, which can take forever if there are hundreds or thousands of
files. Now it batches these into a single command if possible (taking care of
still passing the individual path names to the git call rather than just the
directory, which is necessary for making it work correctly when filtering --
this was actually broken for the "Discard unstaged changes" command, which is
fixed here).
When discarding a directory, we only want to discard those files that are
visible in the current filter view. The tests show that this already works
correctly for discarding all changes, but it doesn't for discarding only
unstaged changes: in this case, untracked files are handled correctly, but
changes to tracked files are discarded without respecting the filter.
We have integration tests for this functionality, but those only test the
behavior, not the performance. In these unit tests you can see that we make
individual calls to git checkout and git reset for each file, which is very slow
when there are lots of files.
Previously it would only check that *if* removeFile was called, the passed
argument was the expected one; but it didn't check whether it was called at all.
Improve this by recording the file names that are removed, and checking them at
the end of each scenario.
This is going to be even more important for the tests that we are about to add
in the next commit, because for those there can be several calls to removeFile
in a single scenario.
When switching to a different repo, and then back to the original one, searching
would no longer work. The reason is that our contexts set callbacks on their
views; when switching to a different repo we instantiate a new set of contexts,
so they will overwrite the views' callbacks with their new ones, but when
switching back to the original repo, we reuse the old contexts because they are
still in memory, but they won't set their callbacks again since they only do
this on construction.
To fix this, replace the view-local callbacks with a global one on the gui that
takes the view as an argument, so that the callback can look up the associated
context dynamically.
Can be used for doing additional click handling in list views.
Like the GetOnDoubleClick hook we should try to find a better design for this
than putting it in HasKeybindings and BaseContext, since it is only used by list
contexts.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
